|
…
|
||
|---|---|---|
| .. | ||
| readme.txt | ||
Sheevaplug ========== Once the build process is finished you will have the following files in the output/images/ directory: - u-boot.kwb - uImage.kirkwood-sheevaplug - rootfs.jffs2 Copy these to a TFTP server, connect ethernet and mini-USB cable and power up the board. Stop the board in U-Boot and update U-Boot by executing: setenv serverip <ipaddress-of-tftp-server> setenv bootfile <path/to/u-boot.kwb> bootp nand erase 0x0 0x80000 nand write $fileaddr 0x0 0x80000 reset Once the new U-Boot boots up, stop it again and update Linux kernel and rootfs by: setenv serverip <ipaddress-of-tftp-server> setenv bootfile <path/to/uImage.kirkwood-sheevaplug> bootp nand erase.part kernel nand write $fileaddr kernel 0x400000 setenv bootfile <path/to/rootfs.jffs2> bootp nand erase.part rootfs nand write $fileaddr rootfs $filesize reset