f645f914ac
For the boards imx6ulevk, imx6sabresd, mx25pdk, mx51evk, mx53loco, warpboard: * Replace genimage.cfg with a common Freescale genimage template named genimage.cfg.template because they all use the same layout. The only difference comes from the device tree blobs. * Replace each post-image.sh script with a generic post-image.sh script which is able to generate the right genimage.cfg depending on: ** the image type (zImage or uImage) from BR2_LINUX_KERNEL_UIMAGE ** the device tree blobs from BR2_LINUX_KERNEL_INTREE_DTS_NAME ** the rootfs type (ext2, ext3 or ext4) from BR2_TARGET_ROOTFS_EXT2 * Fix the readme.txt files accordingly Signed-off-by: Georges Savoundararadj <savoundg@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Peter Korsgaard <peter@korsgaard.com> Cc: Yann E. MORIN <yann.morin.1998@free.fr> [Thomas: remove handling of rootfs type, using rootfs.ext2 in all cases is fine, rootfs.ext3 and rootfs.ext4 are just symbolic links to it.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
65 lines
1.7 KiB
Plaintext
65 lines
1.7 KiB
Plaintext
***************************
|
|
Freescale i.MX6UL EVK board
|
|
***************************
|
|
|
|
This file documents the Buildroot support for the Freescale i.MX6UL EVK board.
|
|
|
|
Please read the i.MX6UL Evaluation Kit Quick Start Guide [1] for an
|
|
introduction to the board.
|
|
|
|
Build
|
|
=====
|
|
|
|
First, configure Buildroot for your i.MX6UL EVK board:
|
|
|
|
make freescale_imx6ulevk_defconfig
|
|
|
|
Build all components:
|
|
|
|
make
|
|
|
|
You will find in ./output/images/ the following files:
|
|
- imx6ul-14x14-evk.dtb
|
|
- rootfs.ext4
|
|
- rootfs.tar
|
|
- sdcard.img
|
|
- u-boot.imx
|
|
- zImage
|
|
|
|
Create a bootable microSD card
|
|
==============================
|
|
|
|
To determine the device associated to the microSD card have a look in the
|
|
/proc/partitions file:
|
|
|
|
cat /proc/partitions
|
|
|
|
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
|
directory, ready to be dumped on a microSD card. Launch the following
|
|
command as root:
|
|
|
|
dd if=./output/images/sdcard.img of=/dev/<your-microsd-device>
|
|
|
|
*** WARNING! This will destroy all the card content. Use with care! ***
|
|
|
|
For details about the medium image layout, see the definition in
|
|
board/freescale/common/genimage.cfg.template.
|
|
|
|
Boot the i.MX6UL EVK board
|
|
=========================
|
|
|
|
To boot your newly created system (refer to the i.MX6UL EVK Quick Start Guide
|
|
[1] for guidance):
|
|
- insert the microSD card in the microSD slot of the board;
|
|
- verify that your i.MX6UL EVK board jumpers and switches are set as mentioned
|
|
in the i.MX6UL EVK Quick Start Guide [1];
|
|
- put a micro USB cable into the Debug USB Port and connect using a terminal
|
|
emulator at 115200 bps, 8n1;
|
|
- power on the board.
|
|
|
|
Enjoy!
|
|
|
|
References
|
|
==========
|
|
[1] http://cache.freescale.com/files/32bit/doc/quick_start_guide/IMX6ULTRALITEQSG.pdf
|