kumquat-buildroot/package/Makefile.autotools.in
Thomas Petazzoni 600d1f8af3 package: pass TARGET_MAKE_ENV at install/clean/uninstall steps
TARGET_MAKE_ENV contains the PATH to the host tools built in
$(HOST_DIR), and not having this directory in the PATH while
installing packages may cause troubles.

The specific example that trigerred the problem is the following
one. libglib2 ./configure tries to find a awk version, either gawk or
mawk. On my limited testing system, only mawk is available, so
normally, libglib2 detects mawk and uses it, and it works perfectly.

However, when host-gawk has been compiled before libglib2 (which
happens for example if you have used the Crosstool-NG backend), gawk
is well detected in $(HOST_DIR)/usr/bin at ./configure time
($(HOST_DIR)/usr/bin is in the PATH at ./configure time, thanks to
TARGET_MAKE_ENV). But at install time, when libglib2 uses gawk, it
doesn't find it anymore because it is not in the PATH.

This also makes things coherent with host installation, in which
$(HOST_MAKE_ENV) was already used.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-13 22:26:52 +01:00

282 lines
8.6 KiB
Makefile

################################################################################
# Autotools package infrastructure
#
# This file implements an infrastructure that eases development of
# package .mk files for autotools packages. It should be used for all
# packages that use the autotools as their build system. Non-autotools
# packages should use the generic infrastructure in
# package/Makefile.package.in.
#
# See the Buildroot documentation for details on the usage of this
# infrastructure
#
# In terms of implementation, this autotools infrastructure requires
# the .mk file to only specify metadata informations about the
# package: name, version, download URL, etc.
#
# We still allow the package .mk file to override what the different
# steps are doing, if needed. For example, if <PKG>_BUILD_CMDS is
# already defined, it is used as the list of commands to perform to
# build the package, instead of the default autotools behaviour. The
# package can also define some post operation hooks.
#
################################################################################
################################################################################
# AUTOTARGETS_INNER -- defines how the configuration, compilation and
# installation of an autotools package should be done, implements a
# few hooks to tune the build process for autotools specifities and
# calls the generic package infrastructure to generate the necessary
# make targets
#
# argument 1 is the lowercase package name
# argument 2 is the uppercase package name, including an HOST_ prefix
# for host packages
# argument 3 is the uppercase package name, without the HOST_ prefix
# for host packages
# argument 4 is the package directory prefix
# argument 5 is the type (target or host)
################################################################################
define AUTOTARGETS_INNER
# define package-specific variables to default values
ifndef $(2)_SUBDIR
ifdef $(3)_SUBDIR
$(2)_SUBDIR = $($(3)_SUBDIR)
else
$(2)_SUBDIR ?=
endif
endif
ifndef $(2)_LIBTOOL_PATCH
ifdef $(3)_LIBTOOL_PATCH
$(2)_LIBTOOL_PATCH = $($(3)_LIBTOOL_PATCH)
else
$(2)_LIBTOOL_PATCH ?= YES
endif
endif
$(2)_CONF_ENV ?=
$(2)_CONF_OPT ?=
$(2)_MAKE ?= $(MAKE)
$(2)_MAKE_ENV ?=
$(2)_MAKE_OPT ?=
$(2)_AUTORECONF ?= NO
$(2)_AUTORECONF_OPT ?=
$(2)_INSTALL_STAGING_OPT ?= DESTDIR=$$(STAGING_DIR) install
$(2)_INSTALL_TARGET_OPT ?= DESTDIR=$$(TARGET_DIR) install
$(2)_CLEAN_OPT ?= clean
$(2)_UNINSTALL_STAGING_OPT ?= DESTDIR=$$(STAGING_DIR) uninstall
$(2)_UNINSTALL_TARGET_OPT ?= DESTDIR=$$(TARGET_DIR) uninstall
$(2)_SRCDIR = $$($(2)_DIR)/$($(2)_SUBDIR)
#
# Configure step. Only define it if not already defined by the package
# .mk file. And take care of the differences between host and target
# packages.
#
ifndef $(2)_CONFIGURE_CMDS
ifeq ($(5),target)
# Configure package for target
define $(2)_CONFIGURE_CMDS
(cd $$($$(PKG)_SRCDIR) && rm -rf config.cache && \
$$(TARGET_CONFIGURE_OPTS) \
$$(TARGET_CONFIGURE_ARGS) \
$$($$(PKG)_CONF_ENV) \
./configure \
--target=$$(GNU_TARGET_NAME) \
--host=$$(GNU_TARGET_NAME) \
--build=$$(GNU_HOST_NAME) \
--prefix=/usr \
--exec-prefix=/usr \
--sysconfdir=/etc \
$$(DISABLE_DOCUMENTATION) \
$$(DISABLE_NLS) \
$$(DISABLE_LARGEFILE) \
$$(DISABLE_IPV6) \
$$(QUIET) $$($$(PKG)_CONF_OPT) \
)
endef
else
# Configure package for host
define $(2)_CONFIGURE_CMDS
(cd $$($$(PKG)_SRCDIR) && rm -rf config.cache; \
$$(HOST_CONFIGURE_OPTS) \
CFLAGS="$$(HOST_CFLAGS)" \
LDFLAGS="$$(HOST_LDFLAGS)" \
$$($$(PKG)_CONF_ENV) \
./configure \
--prefix="$$(HOST_DIR)/usr" \
--sysconfdir="$$(HOST_DIR)/etc" \
$$($$(PKG)_CONF_OPT) \
)
endef
endif
endif
#
# Hook to update config.sub and config.guess if needed
#
define UPDATE_CONFIG_HOOK
for file in config.guess config.sub; do \
for i in $$$$(find $$(@D) -name $$$$file); do \
cp package/gnuconfig/$$$$file $$$$i; \
done; \
done
endef
$(2)_POST_PATCH_HOOKS += UPDATE_CONFIG_HOOK
#
# Hook to patch libtool to make it work properly for cross-compilation
#
define LIBTOOL_PATCH_HOOK
@$$(call MESSAGE,"Patching libtool")
$(Q)if test "$$($$(PKG)_LIBTOOL_PATCH)" = "YES" \
-a "$$($$(PKG)_AUTORECONF)" != "YES"; then \
for i in `find $$($$(PKG)_SRCDIR) -name ltmain.sh`; do \
ltmain_version=`sed -n '/^[ ]*VERSION=/{s/^[ ]*VERSION=//;p;q;}' $$$$i | \
sed -e 's/\([0-9].[0-9]*\).*/\1/' -e 's/\"//'`; \
if test $$$${ltmain_version} = '1.5'; then \
toolchain/patch-kernel.sh $$$${i%/*} package buildroot-libtool-v1.5.patch; \
elif test $$$${ltmain_version} = "2.2"; then\
toolchain/patch-kernel.sh $$$${i%/*} package buildroot-libtool-v2.2.patch; \
fi \
done \
fi
endef
# default values are not evaluated yet, so don't rely on this defaulting to YES
ifneq ($$($(2)_LIBTOOL_PATCH),NO)
$(2)_POST_PATCH_HOOKS += LIBTOOL_PATCH_HOOK
endif
#
# Hook to autoreconf the package if needed
#
define AUTORECONF_HOOK
@$$(call MESSAGE,"Autoreconfiguring")
$(Q)cd $$($$(PKG)_SRCDIR) && $(AUTORECONF) $$($$(PKG)_AUTORECONF_OPT)
$(Q)if test "$$($$(PKG)_LIBTOOL_PATCH)" = "YES"; then \
for i in `find $$($$(PKG)_SRCDIR) -name ltmain.sh`; do \
ltmain_version=`sed -n '/^[ ]*VERSION=/{s/^[ ]*VERSION=//;p;q;}' $$$$i | sed 's/\([0-9].[0-9]*\).*/\1/'`; \
if test $$$${ltmain_version} = "1.5"; then \
toolchain/patch-kernel.sh $$$${i%/*} package buildroot-libtool-v1.5.patch; \
elif test $$$${ltmain_version} = "2.2"; then\
toolchain/patch-kernel.sh $$$${i%/*} package buildroot-libtool-v2.2.patch; \
fi \
done \
fi
endef
ifeq ($$($(2)_AUTORECONF),YES)
$(2)_PRE_CONFIGURE_HOOKS += AUTORECONF_HOOK
$(2)_DEPENDENCIES += host-automake host-autoconf host-libtool
endif
#
# Build step. Only define it if not already defined by the package .mk
# file.
#
ifndef $(2)_BUILD_CMDS
ifeq ($(5),target)
define $(2)_BUILD_CMDS
$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) -C $$($$(PKG)_SRCDIR)
endef
else
define $(2)_BUILD_CMDS
$(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPT) -C $$($$(PKG)_SRCDIR)
endef
endif
endif
#
# Host installation step. Only define it if not already defined by the
# package .mk file.
#
ifndef $(2)_INSTALL_CMDS
define $(2)_INSTALL_CMDS
$(HOST_MAKE_ENV) $(MAKE) -C $$($$(PKG)_SRCDIR) install
endef
endif
#
# Staging installation step. Only define it if not already defined by
# the package .mk file.
#
ifndef $(2)_INSTALL_STAGING_CMDS
define $(2)_INSTALL_STAGING_CMDS
$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_INSTALL_STAGING_OPT) -C $$($$(PKG)_SRCDIR)
for i in $$$$(find $(STAGING_DIR)/usr/lib* -name "*.la"); do \
cp -f $$$$i $$$$i~; \
$$(SED) "s:\(['= ]\)/usr:\\1$(STAGING_DIR)/usr:g" $$$$i; \
done
endef
endif
#
# Target installation step. Only define it if not already defined by
# the package .mk file.
#
ifndef $(2)_INSTALL_TARGET_CMDS
define $(2)_INSTALL_TARGET_CMDS
$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_INSTALL_TARGET_OPT) -C $$($$(PKG)_SRCDIR)
endef
endif
#
# Clean step. Only define it if not already defined by
# the package .mk file.
#
ifndef $(2)_CLEAN_CMDS
define $(2)_CLEAN_CMDS
-$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_CLEAN_OPT) -C $$($$(PKG)_SRCDIR)
endef
endif
#
# Uninstall from staging step. Only define it if not already defined by
# the package .mk file.
#
ifndef $(2)_UNINSTALL_STAGING_CMDS
define $(2)_UNINSTALL_STAGING_CMDS
$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_UNINSTALL_STAGING_OPT) -C $$($$(PKG)_SRCDIR)
endef
endif
#
# Uninstall from target step. Only define it if not already defined
# by the package .mk file.
#
ifndef $(2)_UNINSTALL_TARGET_CMDS
define $(2)_UNINSTALL_TARGET_CMDS
$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_UNINSTALL_TARGET_OPT) -C $$($$(PKG)_SRCDIR)
endef
endif
# Call the generic package infrastructure to generate the necessary
# make targets
$(call GENTARGETS_INNER,$(1),$(2),$(3),$(4),$(5))
endef
################################################################################
# AUTOTARGETS -- the target generator macro for autotools packages
#
# Argument 1 is the package directory prefix [mandatory]
# Argument 2 is the lowercase package name [mandatory]
# Argument 3 is "target" or "host" [optional, default: "target"]
################################################################################
define AUTOTARGETS
ifeq ($(3),host)
$(call AUTOTARGETS_INNER,$(3)-$(2),$(call UPPERCASE,$(3)-$(2)),$(call UPPERCASE,$(2)),$(1),host)
else
$(call AUTOTARGETS_INNER,$(2),$(call UPPERCASE,$(2)),$(call UPPERCASE,$(2)),$(1),target)
endif
endef