NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
131cb09c79
kumquat-buildroot/board/orangepi/orangepi-zero-plus
History
Marcin Niestroj 19eaece70a board/orangepi-zero-plus: bump Linux/U-Boot and switch to extlinux 
Follow changes to other OrangePi boards, most importantly
orangepi-zero-plus2, which this board support is based on. This includes
switching to extlinux as boot mechanism and dropping custom U-Boot boot
script.

Rootfs image no longer fits into default 60M (mostly due to Linux
modules), so increase it to 120M.

While at it, bump Linux to 6.1.4 and U-Boot to 2023.01.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2023-01-12 20:21:32 +01:00
..
readme.txt

readme.txt 

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi Zero Plus. With the current configuration
it will bring-up the board, and allow access through the serial console.

Orangepi Zero Plus link:
http://www.orangepi.org/OrangePiZeroPlus/

This configuration uses U-Boot mainline and kernel mainline.

How to build
============

    $ make orangepi_zero_plus_defconfig
    $ make

Note: you will need access to the internet to download the required
sources.

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
  $ sudo sync

Insert the micro SDcard in your Orangepi Zero Plus and power it up. The console
is on the serial line, 115200 8N1.