kumquat-buildroot/toolchain/uClibc/uclibc.mk

626 lines
22 KiB
Makefile

#############################################################
#
# uClibc (the C library)
#
#############################################################
ifeq ($(BR2_TOOLCHAIN_SOURCE),y)
# specifying UCLIBC_CONFIG_FILE on the command-line overrides the .config
# setting.
ifndef UCLIBC_CONFIG_FILE
UCLIBC_CONFIG_FILE=$(subst ",, $(strip $(BR2_UCLIBC_CONFIG)))
#")
endif
ifeq ($(BR2_UCLIBC_VERSION_SNAPSHOT),y)
# Be aware that this changes daily....
UCLIBC_VER:=0.9.29
UCLIBC_DIR:=$(TOOL_BUILD_DIR)/uClibc
UCLIBC_SOURCE:=uClibc-$(strip $(subst ",, $(BR2_USE_UCLIBC_SNAPSHOT))).tar.bz2
#"))
UCLIBC_SITE:=http://www.uclibc.org/downloads/snapshots
UCLIBC_PATCH_DIR:=toolchain/uClibc/
else
# releases
ifeq ($(BR2_UCLIBC_VERSION_0_9_29),y)
UCLIBC_VER:=0.9.29
endif
ifeq ($(BR2_UCLIBC_VERSION_0_9_28_3),y)
UCLIBC_VER:=0.9.28.3
endif
UCLIBC_SITE:=http://www.uclibc.org/downloads
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_SOURCE),y)
UCLIBC_SITE:=$(VENDOR_SITE)
endif
UCLIBC_OFFICIAL_VERSION:=$(UCLIBC_VER)$(VENDOR_SUFFIX)$(VENDOR_UCLIBC_RELEASE)
ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
UCLIBC_PATCH_DIR:=toolchain/uClibc/
else
UCLIBC_PATCH_DIR:=toolchain/uClibc/ext_source/$(VENDOR_PATCH_DIR)/$(UCLIBC_OFFICIAL_VERSION)
endif
UCLIBC_DIR:=$(TOOL_BUILD_DIR)/uClibc-$(UCLIBC_OFFICIAL_VERSION)
UCLIBC_SOURCE:=uClibc-$(UCLIBC_OFFICIAL_VERSION).tar.bz2
endif
UCLIBC_CAT:=$(BZCAT)
UCLIBC_TARGET_ARCH:=$(shell $(SHELL) -c "echo $(ARCH) | sed \
-e 's/-.*//' \
-e 's/i.86/i386/' \
-e 's/sparc.*/sparc/' \
-e 's/arm.*/arm/g' \
-e 's/m68k.*/m68k/' \
-e 's/ppc/powerpc/g' \
-e 's/v850.*/v850/g' \
-e 's/sh[234].*/sh/' \
-e 's/mips.*/mips/' \
-e 's/mipsel.*/mips/' \
-e 's/cris.*/cris/' \
-e 's/nios2.*/nios2/' \
")
# just handle the ones that can be big or little
UCLIBC_TARGET_ENDIAN:=$(shell $(SHELL) -c "echo $(ARCH) | sed \
-e 's/armeb/BIG/' \
-e 's/arm/LITTLE/' \
-e 's/mipsel/LITTLE/' \
-e 's/mips/BIG/' \
-e 's/sh[234].*eb/BIG/' \
-e 's/sh[234]/LITTLE/' \
-e 's/sparc.*/BIG/' \
")
ifneq ($(UCLIBC_TARGET_ENDIAN),LITTLE)
ifneq ($(UCLIBC_TARGET_ENDIAN),BIG)
UCLIBC_TARGET_ENDIAN:=
endif
endif
ifeq ($(UCLIBC_TARGET_ENDIAN),LITTLE)
UCLIBC_NOT_TARGET_ENDIAN:=BIG
else
UCLIBC_NOT_TARGET_ENDIAN:=LITTLE
endif
UCLIBC_ARM_TYPE:=CONFIG_$(strip $(subst ",, $(BR2_ARM_TYPE)))
#"))
UCLIBC_SPARC_TYPE:=CONFIG_SPARC_$(strip $(subst ",, $(BR2_SPARC_TYPE)))
#"))
$(DL_DIR)/$(UCLIBC_SOURCE):
$(WGET) -P $(DL_DIR) $(UCLIBC_SITE)/$(UCLIBC_SOURCE)
ifneq ($(BR2_ENABLE_LOCALE),)
UCLIBC_SITE_LOCALE:=http://www.uclibc.org/downloads
UCLIBC_SOURCE_LOCALE:=uClibc-locale-030818.tgz
$(DL_DIR)/$(UCLIBC_SOURCE_LOCALE):
$(WGET) -P $(DL_DIR) $(UCLIBC_SITE_LOCALE)/$(UCLIBC_SOURCE_LOCALE)
UCLIBC_LOCALE_DATA:=$(DL_DIR)/$(UCLIBC_SOURCE_LOCALE)
else
UCLIBC_LOCALE_DATA=
endif
uclibc-unpacked: $(UCLIBC_DIR)/.unpacked
$(UCLIBC_DIR)/.unpacked: $(DL_DIR)/$(UCLIBC_SOURCE) $(UCLIBC_LOCALE_DATA)
mkdir -p $(TOOL_BUILD_DIR)
rm -rf $(UCLIBC_DIR)
$(UCLIBC_CAT) $(DL_DIR)/$(UCLIBC_SOURCE) | tar -C $(TOOL_BUILD_DIR) $(TAR_OPTIONS) -
touch $@
uclibc-patched: $(UCLIBC_DIR)/.patched
$(UCLIBC_DIR)/.patched: $(UCLIBC_DIR)/.unpacked
ifneq ($(BR2_UCLIBC_VERSION_SNAPSHOT),y)
toolchain/patch-kernel.sh $(UCLIBC_DIR) $(UCLIBC_PATCH_DIR) \
uClibc-$(UCLIBC_OFFICIAL_VERSION)-\*.patch \
uClibc-$(UCLIBC_OFFICIAL_VERSION)-\*.patch.$(ARCH)
else
toolchain/patch-kernel.sh $(UCLIBC_DIR) $(UCLIBC_PATCH_DIR) \
uClibc.\*.patch uClibc.\*.patch.$(ARCH)
endif
ifneq ($(BR2_ENABLE_LOCALE),)
cp -dpf $(DL_DIR)/$(UCLIBC_SOURCE_LOCALE) $(UCLIBC_DIR)/extra/locale/
endif
touch $@
# Some targets may wish to provide their own UCLIBC_CONFIG_FILE...
$(UCLIBC_DIR)/.oldconfig: $(UCLIBC_DIR)/.patched $(UCLIBC_CONFIG_FILE)
cp -f $(UCLIBC_CONFIG_FILE) $(UCLIBC_DIR)/.oldconfig
$(SED) 's,^CROSS_COMPILER_PREFIX=.*,CROSS_COMPILER_PREFIX="$(TARGET_CROSS)",g' \
-e 's,# TARGET_$(UCLIBC_TARGET_ARCH) is not set,TARGET_$(UCLIBC_TARGET_ARCH)=y,g' \
-e 's,^TARGET_ARCH=".*",TARGET_ARCH=\"$(UCLIBC_TARGET_ARCH)\",g' \
-e 's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"$(LINUX_HEADERS_DIR)\",g' \
-e 's,^KERNEL_HEADERS=.*,KERNEL_HEADERS=\"$(LINUX_HEADERS_DIR)/include\",g' \
-e 's,^RUNTIME_PREFIX=.*,RUNTIME_PREFIX=\"/\",g' \
-e 's,^DEVEL_PREFIX=.*,DEVEL_PREFIX=\"/usr/\",g' \
-e 's,^SHARED_LIB_LOADER_PREFIX=.*,SHARED_LIB_LOADER_PREFIX=\"/lib\",g' \
$(UCLIBC_DIR)/.oldconfig
ifeq ($(UCLIBC_TARGET_ARCH),arm)
(/bin/echo "# CONFIG_GENERIC_ARM is not set"; \
/bin/echo "# CONFIG_ARM610 is not set"; \
/bin/echo "# CONFIG_ARM710 is not set"; \
/bin/echo "# CONFIG_ARM7TDMI is not set"; \
/bin/echo "# CONFIG_ARM720T is not set"; \
/bin/echo "# CONFIG_ARM920T is not set"; \
/bin/echo "# CONFIG_ARM922T is not set"; \
/bin/echo "# CONFIG_ARM926T is not set"; \
/bin/echo "# CONFIG_ARM10T is not set"; \
/bin/echo "# CONFIG_ARM1136JF_S is not set"; \
/bin/echo "# CONFIG_ARM1176JZ_S is not set"; \
/bin/echo "# CONFIG_ARM1176JZF_S is not set"; \
/bin/echo "# CONFIG_ARM_SA110 is not set"; \
/bin/echo "# CONFIG_ARM_SA1100 is not set"; \
/bin/echo "# CONFIG_ARM_XSCALE is not set"; \
/bin/echo "# CONFIG_ARM_IWMMXT is not set"; \
) >> $(UCLIBC_DIR)/.oldconfig
$(SED) 's/^\(CONFIG_[^_]*[_]*ARM[^=]*\)=.*/# \1 is not set/g' \
$(UCLIBC_DIR)/.oldconfig
$(SED) 's/^.*$(UCLIBC_ARM_TYPE).*/$(UCLIBC_ARM_TYPE)=y/g' $(UCLIBC_DIR)/.oldconfig
$(SED) '/CONFIG_ARM_.ABI/d' $(UCLIBC_DIR)/.oldconfig
ifeq ($(BR2_ARM_EABI),y)
/bin/echo "# CONFIG_ARM_OABI is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "CONFIG_ARM_EABI=y" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_ARM_OABI),y)
/bin/echo "CONFIG_ARM_OABI=y" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_ARM_EABI is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
endif
ifeq ($(UCLIBC_TARGET_ARCH),mips)
$(SED) '/CONFIG_MIPS_[NO].._ABI/d' $(UCLIBC_DIR)/.oldconfig
$(SED) '/CONFIG_MIPS_ISA_.*/d' $(UCLIBC_DIR)/.oldconfig
(/bin/echo "# CONFIG_MIPS_O32_ABI is not set"; \
/bin/echo "# CONFIG_MIPS_N32_ABI is not set"; \
/bin/echo "# CONFIG_MIPS_N64_ABI is not set"; \
/bin/echo "# CONFIG_MIPS_ISA_1 is not set"; \
/bin/echo "# CONFIG_MIPS_ISA_2 is not set"; \
/bin/echo "# CONFIG_MIPS_ISA_3 is not set"; \
/bin/echo "# CONFIG_MIPS_ISA_4 is not set"; \
/bin/echo "# CONFIG_MIPS_ISA_MIPS32 is not set"; \
/bin/echo "# CONFIG_MIPS_ISA_MIPS64 is not set"; \
) >> $(UCLIBC_DIR)/.oldconfig
ifeq ($(BR2_MIPS_OABI),y)
$(SED) 's/.*\(CONFIG_MIPS_O32_ABI\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_MIPS_EABI),y)
$(SED) 's/.*\(CONFIG_MIPS_N32_ABI\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_MIPS_ABI64),y)
$(SED) 's/.*\(CONFIG_MIPS_N64_ABI\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_mips_1),y)
$(SED) 's/.*\(CONFIG_MIPS_ISA_1\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_mips_2),y)
$(SED) 's/.*\(CONFIG_MIPS_ISA_2\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_mips_3),y)
$(SED) 's/.*\(CONFIG_MIPS_ISA_3\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_mips_4),y)
$(SED) 's/.*\(CONFIG_MIPS_ISA_4\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_mips_32),y)
$(SED) 's/.*\(CONFIG_MIPS_ISA_MIPS32\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_mips_32r2),y)
$(SED) 's/.*\(CONFIG_MIPS_ISA_MIPS32\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_mips_64),y)
$(SED) 's/.*\(CONFIG_MIPS_ISA_MIPS64\).*/\1=y/' $(UCLIBC_DIR)/.oldconfig
endif
endif
ifeq ($(UCLIBC_TARGET_ARCH),nios2)
/bin/echo "# UCLIBC_FORMAT_FDPIC_ELF is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "UCLIBC_FORMAT_FLAT=y" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# UCLIBC_FORMAT_FLAT_SEP_DATA is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# UCLIBC_FORMAT_SHARED_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(UCLIBC_TARGET_ARCH),sh)
/bin/echo "# CONFIG_SH2A is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_SH2 is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_SH3 is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_SH4 is not set" >> $(UCLIBC_DIR)/.oldconfig
ifeq ($(BR2_sh2a_nofpueb),y)
$(SED) 's,# CONFIG_SH2A is not set,CONFIG_SH2A=y,g' $(UCLIBC_DIR)/.oldconfig
/bin/echo "# UCLIBC_FORMAT_FDPIC_ELF is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# UCLIBC_FORMAT_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# UCLIBC_FORMAT_FLAT_SEP_DATA is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# UCLIBC_FORMAT_SHARED_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_sh2eb),y)
$(SED) 's,# CONFIG_SH2 is not set,CONFIG_SH2=y,g' $(UCLIBC_DIR)/.oldconfig
/bin/echo "# UCLIBC_FORMAT_FDPIC_ELF is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# UCLIBC_FORMAT_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# UCLIBC_FORMAT_FLAT_SEP_DATA is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# UCLIBC_FORMAT_SHARED_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_sh3eb),y)
$(SED) 's,# CONFIG_SH3 is not set,CONFIG_SH3=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_sh3),y)
$(SED) 's,# CONFIG_SH3 is not set,CONFIG_SH3=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_sh4eb),y)
$(SED) 's,# CONFIG_SH4 is not set,CONFIG_SH4=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_sh4),y)
$(SED) 's,# CONFIG_SH4 is not set,CONFIG_SH4=y,g' $(UCLIBC_DIR)/.oldconfig
endif
endif
ifeq ($(UCLIBC_TARGET_ARCH),sparc)
$(SED) 's/^\(CONFIG_[^_]*[_]*SPARC[^=]*\)=.*/# \1 is not set/g' \
$(UCLIBC_DIR)/.oldconfig
for i in V7 V8 V9 V9B; do echo "# CONFIG_SPARC_$$i is not set"; done \
>> $(UCLIBC_DIR)/.oldconfig
$(SED) 's/^.*$(UCLIBC_SPARC_TYPE).*/$(UCLIBC_SPARC_TYPE)=y/g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(UCLIBC_TARGET_ARCH),powerpc)
ifeq ($(BR2_powerpc_8540),y)
/bin/echo "# CONFIG_CLASSIC is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "CONFIG_E500=y" >> $(UCLIBC_DIR)/.oldconfig
else
/bin/echo "CONFIG_CLASSIC=y" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_E500 is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
endif
ifneq ($(UCLIBC_TARGET_ENDIAN),)
# The above doesn't work for me, so redo
$(SED) 's/.*\(ARCH_$(UCLIBC_NOT_TARGET_ENDIAN)_ENDIAN\).*/# \1 is not set/g' \
-e 's/.*\(ARCH_WANTS_$(UCLIBC_NOT_TARGET_ENDIAN)_ENDIAN\).*/# \1 is not set/g' \
-e 's/.*\(ARCH_$(UCLIBC_TARGET_ENDIAN)_ENDIAN\).*/\1=y/g' \
-e 's/.*\(ARCH_WANTS_$(UCLIBC_TARGET_ENDIAN)_ENDIAN\).*/\1=y/g' \
$(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_LARGEFILE),y)
$(SED) 's,.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=y,g' $(UCLIBC_DIR)/.oldconfig
else
$(SED) 's,.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=n,g' $(UCLIBC_DIR)/.oldconfig
$(SED) '/.*UCLIBC_HAS_FOPEN_LARGEFILE_MODE.*/d' $(UCLIBC_DIR)/.oldconfig
echo "# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_INET_IPV6),y)
$(SED) 's,^.*UCLIBC_HAS_IPV6.*,UCLIBC_HAS_IPV6=y,g' $(UCLIBC_DIR)/.oldconfig
else
$(SED) 's,^.*UCLIBC_HAS_IPV6.*,UCLIBC_HAS_IPV6=n,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_INET_RPC),y)
$(SED) 's,^.*UCLIBC_HAS_RPC.*,UCLIBC_HAS_RPC=y,g' \
-e 's,^.*UCLIBC_HAS_FULL_RPC.*,UCLIBC_HAS_FULL_RPC=y,g' \
-e 's,^.*UCLIBC_HAS_REENTRANT_RPC.*,UCLIBC_HAS_REENTRANT_RPC=y,g' \
$(UCLIBC_DIR)/.oldconfig
else
$(SED) 's,^.*UCLIBC_HAS_RPC.*,UCLIBC_HAS_RPC=n,g' \
-e 's,^.*UCLIBC_HAS_FULL_RPC.*,UCLIBC_HAS_FULL_RPC=n,g' \
-e 's,^.*UCLIBC_HAS_REENTRANT_RPC.*,UCLIBC_HAS_REENTRANT_RPC=n,g' \
$(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_SOFT_FLOAT),y)
$(SED) 's,.*UCLIBC_HAS_FPU.*,UCLIBC_HAS_FPU=n,g' \
-e 's,^[^_]*HAS_FPU.*,HAS_FPU=n,g' \
-e 's,.*UCLIBC_HAS_FLOATS.*,UCLIBC_HAS_FLOATS=y,g' \
-e 's,.*DO_C99_MATH.*,DO_C99_MATH=y,g' \
$(UCLIBC_DIR)/.oldconfig
#$(SED) 's,.*UCLIBC_HAS_FPU.*,UCLIBC_HAS_FPU=n\nHAS_FPU=n\nUCLIBC_HAS_FLOATS=y\nUCLIBC_HAS_SOFT_FLOAT=y,g' $(UCLIBC_DIR)/.oldconfig
else
$(SED) '/UCLIBC_HAS_FLOATS/d' \
-e 's,.*UCLIBC_HAS_FPU.*,UCLIBC_HAS_FPU=y\nHAS_FPU=y\nUCLIBC_HAS_FLOATS=y\n,g' \
$(UCLIBC_DIR)/.oldconfig
endif
$(SED) '/UCLIBC_HAS_THREADS/d' $(UCLIBC_DIR)/.oldconfig
$(SED) '/LINUXTHREADS/d' $(UCLIBC_DIR)/.oldconfig
$(SED) '/LINUXTHREADS_OLD/d' $(UCLIBC_DIR)/.oldconfig
$(SED) '/PTHREADS_DEBUG_SUPPORT/d' $(UCLIBC_DIR)/.oldconfig
$(SED) '/UCLIBC_HAS_THREADS_NATIVE/d' $(UCLIBC_DIR)/.oldconfig
ifeq ($(BR2_PTHREADS_NONE),y)
echo "# UCLIBC_HAS_THREADS is not set" >> $(UCLIBC_DIR)/.oldconfig
else
echo "UCLIBC_HAS_THREADS=y" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_PTHREADS),y)
echo "LINUXTHREADS=y" >> $(UCLIBC_DIR)/.oldconfig
else
echo "# LINUXTHREADS is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_PTHREADS_OLD),y)
echo "LINUXTHREADS_OLD=y" >> $(UCLIBC_DIR)/.oldconfig
else
echo "# LINUXTHREADS_OLD is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_PTHREADS_NATIVE),y)
echo "UCLIBC_HAS_THREADS_NATIVE=y" >> $(UCLIBC_DIR)/.oldconfig
else
echo "# UCLIBC_HAS_THREADS_NATIVE is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_PTHREAD_DEBUG),y)
echo "PTHREADS_DEBUG_SUPPORT=y" >> $(UCLIBC_DIR)/.oldconfig
else
echo "# PTHREADS_DEBUG_SUPPORT is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_ENABLE_LOCALE),y)
$(SED) 's,^.*UCLIBC_HAS_LOCALE.*,UCLIBC_HAS_LOCALE=y\nUCLIBC_PREGENERATED_LOCALE_DATA=y\nUCLIBC_DOWNLOAD_PREGENERATED_LOCALE_DATA=y\nUCLIBC_HAS_XLOCALE=y\nUCLIBC_HAS_GLIBC_DIGIT_GROUPING=n\n,g' $(UCLIBC_DIR)/.oldconfig
$(SED) 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g' $(UCLIBC_DIR)/.oldconfig
else
$(SED) 's,^.*UCLIBC_HAS_LOCALE.*,UCLIBC_HAS_LOCALE=n,g' $(UCLIBC_DIR)/.oldconfig
$(SED) 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=n,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_USE_WCHAR),y)
$(SED) 's,^.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g' $(UCLIBC_DIR)/.oldconfig
else
$(SED) 's,^.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=n,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_UCLIBC_PROGRAM_INVOCATION),y)
$(SED) 's,^.*UCLIBC_HAS_PROGRAM_INVOCATION_NAME.*,UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y,g' $(UCLIBC_DIR)/.oldconfig
else
$(SED) 's,^.*UCLIBC_HAS_PROGRAM_INVOCATION_NAME.*,UCLIBC_HAS_PROGRAM_INVOCATION_NAME=n,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ("$(KERNEL_ARCH)","i386")
/bin/echo "# CONFIG_GENERIC_386 is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_386 is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_486 is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_586 is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_586MMX is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_686 is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_PENTIUMII is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_PENTIUMIII is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_PENTIUM4 is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_K6 is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_K7 is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_ELAN is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_CRUSOE is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_WINCHIPC6 is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_WINCHIP2 is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_CYRIXIII is not set" >> $(UCLIBC_DIR)/.oldconfig
/bin/echo "# CONFIG_NEHEMIAH is not set" >> $(UCLIBC_DIR)/.oldconfig
ifeq ($(BR2_x86_i386),y)
$(SED) 's,# CONFIG_386 is not set,CONFIG_386=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_i486),y)
$(SED) 's,# CONFIG_486 is not set,CONFIG_486=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_i586),y)
$(SED) 's,# CONFIG_586 is not set,CONFIG_586=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_pentium_mmx),y)
$(SED) 's,# CONFIG_586MMX is not set,CONFIG_586MMX=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_i686),y)
$(SED) 's,# CONFIG_686 is not set,CONFIG_686=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_pentiumpro),y)
$(SED) 's,# CONFIG_686 is not set,CONFIG_686=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_pentium2),y)
$(SED) 's,# CONFIG_PENTIUMII is not set,CONFIG_PENTIUMII=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_pentium3),y)
$(SED) 's,# CONFIG_PENTIUMIII is not set,CONFIG_PENTIUMIII=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_pentium4),y)
$(SED) 's,# CONFIG_PENTIUM4 is not set,CONFIG_PENTIUM4=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_pentium_m),y)
$(SED) 's,# CONFIG_PENTIUM4 is not set,CONFIG_PENTIUM4=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_nocona),y)
$(SED) 's,# CONFIG_PENTIUM4 is not set,CONFIG_PENTIUM4=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_core2),y)
$(SED) 's,# CONFIG_PENTIUM4 is not set,CONFIG_PENTIUM4=y,g' $(UCLIBC_DIR)/.oldconfig
endif
endif
$(UCLIBC_DIR)/.config: $(UCLIBC_DIR)/.oldconfig
cp -f $(UCLIBC_DIR)/.oldconfig $(UCLIBC_DIR)/.config
mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/usr/include
mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/usr/lib
mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/lib
$(MAKE1) -C $(UCLIBC_DIR) \
PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \
DEVEL_PREFIX=/usr/ \
RUNTIME_PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \
HOSTCC="$(HOSTCC)" \
oldconfig
touch $@
$(UCLIBC_DIR)/.configured: $(LINUX_HEADERS_DIR)/.configured $(UCLIBC_DIR)/.config
set -x && $(MAKE1) -C $(UCLIBC_DIR) \
PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \
DEVEL_PREFIX=/usr/ \
RUNTIME_PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \
HOSTCC="$(HOSTCC)" \
headers install_dev
# Install the kernel headers to the first stage gcc include dir
# if necessary
ifeq ($(LINUX_HEADERS_IS_KERNEL),y)
if [ ! -f $(TOOL_BUILD_DIR)/uClibc_dev/usr/include/linux/version.h ]; then \
cp -pLR $(LINUX_HEADERS_DIR)/include/* \
$(TOOL_BUILD_DIR)/uClibc_dev/usr/include/; \
fi
else
if [ ! -f $(STAGING_DIR)/usr/include/linux/version.h ]; then \
cp -pLR $(LINUX_HEADERS_DIR)/include/asm \
$(TOOL_BUILD_DIR)/uClibc_dev/usr/include/; \
cp -pLR $(LINUX_HEADERS_DIR)/include/linux \
$(TOOL_BUILD_DIR)/uClibc_dev/usr/include/; \
if [ -d $(LINUX_HEADERS_DIR)/include/asm-generic ]; then \
cp -pLR $(LINUX_HEADERS_DIR)/include/asm-generic \
$(TOOL_BUILD_DIR)/uClibc_dev/usr/include/; \
fi; \
fi
endif
touch $@
$(UCLIBC_DIR)/lib/libc.a: $(UCLIBC_DIR)/.configured $(gcc_initial) $(LIBFLOAT_TARGET)
$(MAKE1) -C $(UCLIBC_DIR) \
PREFIX= \
DEVEL_PREFIX=/ \
RUNTIME_PREFIX=/ \
HOSTCC="$(HOSTCC)" \
all
touch -c $@
uclibc-menuconfig: host-sed $(UCLIBC_DIR)/.config
$(MAKE1) -C $(UCLIBC_DIR) \
PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \
DEVEL_PREFIX=/usr/ \
RUNTIME_PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \
HOSTCC="$(HOSTCC)" \
menuconfig && \
touch -c $(UCLIBC_DIR)/.config
$(STAGING_DIR)/usr/lib/libc.a: $(UCLIBC_DIR)/lib/libc.a
ifneq ($(BR2_TOOLCHAIN_SYSROOT),y)
$(MAKE1) -C $(UCLIBC_DIR) \
PREFIX= \
DEVEL_PREFIX=$(STAGING_DIR)/ \
RUNTIME_PREFIX=$(STAGING_DIR)/ \
install_runtime install_dev
else
$(MAKE1) -C $(UCLIBC_DIR) \
PREFIX=$(STAGING_DIR) \
DEVEL_PREFIX=/usr/ \
RUNTIME_PREFIX=/ \
install_runtime install_dev
endif
# Install the kernel headers to the staging dir if necessary
ifeq ($(LINUX_HEADERS_IS_KERNEL),y)
if [ ! -f $(STAGING_DIR)/usr/include/linux/version.h ]; then \
cp -pLR $(LINUX_HEADERS_DIR)/include/* \
$(STAGING_DIR)/usr/include/; \
fi
else
if [ ! -f $(STAGING_DIR)/usr/include/linux/version.h ]; then \
cp -pLR $(LINUX_HEADERS_DIR)/include/asm \
$(STAGING_DIR)/usr/include/; \
cp -pLR $(LINUX_HEADERS_DIR)/include/linux \
$(STAGING_DIR)/usr/include/; \
if [ -d $(LINUX_HEADERS_DIR)/include/asm-generic ]; then \
cp -pLR $(LINUX_HEADERS_DIR)/include/asm-generic \
$(STAGING_DIR)/usr/include/; \
fi; \
fi
endif
# Build the host utils. Need to add an install target...
$(MAKE1) -C $(UCLIBC_DIR)/utils \
PREFIX=$(STAGING_DIR) \
HOSTCC="$(HOSTCC)" \
hostutils
if [ -f $(UCLIBC_DIR)/utils/ldd.host ]; then \
install -c $(UCLIBC_DIR)/utils/ldd.host $(STAGING_DIR)/usr/bin/ldd; \
ln -sf ldd $(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-ldd; \
fi
if [ -f $(UCLIBC_DIR)/utils/ldconfig.host ]; then \
install -c $(UCLIBC_DIR)/utils/ldconfig.host $(STAGING_DIR)/usr/bin/ldconfig; \
ln -sf ldconfig $(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-ldconfig; \
ln -sf ldconfig $(STAGING_DIR)/usr/bin/$(GNU_TARGET_NAME)-ldconfig; \
fi
touch -c $@
ifneq ($(TARGET_DIR),)
$(TARGET_DIR)/lib/libc.so.0: $(STAGING_DIR)/usr/lib/libc.a
$(MAKE1) -C $(UCLIBC_DIR) \
PREFIX=$(TARGET_DIR) \
DEVEL_PREFIX=/usr/ \
RUNTIME_PREFIX=/ \
install_runtime
ifeq ($(BR2_UCLIBC_VERSION_0_9_28_3),y)
ifneq ($(BR2_PTHREAD_DEBUG),y)
-$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(@D)/libpthread*.so*
endif
endif
touch -c $@
$(TARGET_DIR)/usr/bin/ldd: $(cross_compiler)
$(MAKE1) -C $(UCLIBC_DIR) CC=$(TARGET_CROSS)gcc \
CPP=$(TARGET_CROSS)cpp LD=$(TARGET_CROSS)ld \
PREFIX=$(TARGET_DIR) utils install_utils
ifeq ($(strip $(BR2_CROSS_TOOLCHAIN_TARGET_UTILS)),y)
mkdir -p $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/target_utils
install -c $(TARGET_DIR)/usr/bin/ldd \
$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/target_utils/ldd
endif
touch -c $@
UCLIBC_TARGETS=$(TARGET_DIR)/lib/libc.so.0
endif
uclibc: $(cross_compiler) $(STAGING_DIR)/usr/lib/libc.a $(UCLIBC_TARGETS)
uclibc-source: $(DL_DIR)/$(UCLIBC_SOURCE)
uclibc-unpacked: $(UCLIBC_DIR)/.unpacked
uclibc-config: $(UCLIBC_DIR)/.config
uclibc-oldconfig: $(UCLIBC_DIR)/.oldconfig
uclibc-update: uclibc-config
cp -f $(UCLIBC_DIR)/.config $(UCLIBC_CONFIG_FILE)
uclibc-configured: kernel-headers $(UCLIBC_DIR)/.configured
uclibc-configured-source: uclibc-source
uclibc-clean:
-$(MAKE1) -C $(UCLIBC_DIR) clean
rm -f $(UCLIBC_DIR)/.config
uclibc-dirclean:
rm -rf $(UCLIBC_DIR)
uclibc-target-utils:
#$(TARGET_DIR)/usr/bin/ldd
uclibc-target-utils-source: $(DL_DIR)/$(UCLIBC_SOURCE)
#############################################################
#
# uClibc for the target just needs its header files
# and whatnot installed.
#
#############################################################
$(TARGET_DIR)/usr/lib/libc.a: $(STAGING_DIR)/usr/lib/libc.a
$(MAKE1) -C $(UCLIBC_DIR) \
PREFIX=$(TARGET_DIR) \
DEVEL_PREFIX=/usr/ \
RUNTIME_PREFIX=/ \
install_dev
# Install the kernel headers to the target dir if necessary
ifeq ($(LINUX_HEADERS_IS_KERNEL),y)
if [ ! -f $(TARGET_DIR)/usr/include/linux/version.h ]; then \
cp -pLR $(LINUX_HEADERS_DIR)/include/* \
$(TARGET_DIR)/usr/include/; \
fi
else
if [ ! -f $(TARGET_DIR)/usr/include/linux/version.h ]; then \
cp -pLR $(LINUX_HEADERS_DIR)/include/asm \
$(TARGET_DIR)/usr/include/; \
cp -pLR $(LINUX_HEADERS_DIR)/include/linux \
$(TARGET_DIR)/usr/include/; \
if [ -d $(LINUX_HEADERS_DIR)/include/asm-generic ]; then \
cp -pLR $(LINUX_HEADERS_DIR)/include/asm-generic \
$(TARGET_DIR)/usr/include/; \
fi; \
fi
endif
touch -c $@
uclibc_target: cross_compiler uclibc $(TARGET_DIR)/usr/lib/libc.a $(TARGET_DIR)/usr/bin/ldd
uclibc_target-clean:
rm -rf $(TARGET_DIR)/usr/include \
$(TARGET_DIR)/usr/lib/libc.a $(TARGET_DIR)/usr/bin/ldd
uclibc_target-dirclean:
rm -rf $(TARGET_DIR)/usr/include
endif