kumquat-buildroot/boot/u-boot/Config.in
Peter Korsgaard b9997ca731 u-boot: add 2010.06 release
A few minor modifications of u-boot.mk is needed to support 2010.06:

- U-Boot now uses ARCH=powerpc like the kernel (instead of ARCH=ppc)
- Library files have moved, so adjust the target mkimage/fw_printenv rules
  (still compatible with older versions)

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-07-05 16:54:45 +02:00

117 lines
2.5 KiB
Plaintext

menuconfig BR2_TARGET_UBOOT
bool "U-Boot"
help
Build "Das U-Boot" Boot Monitor
if BR2_TARGET_UBOOT
config BR2_TARGET_UBOOT_BOARDNAME
string "U-Boot board name"
help
One of U-Boot supported boards to be built.
This will be suffixed with _config to meet U-Boot standard naming.
choice
prompt "U-Boot Version"
default BR2_TARGET_UBOOT_2010_06
help
Select the specific U-Boot version you want to use
config BR2_TARGET_UBOOT_2010_06
bool "2010.06"
config BR2_TARGET_UBOOT_2010_03
bool "2010.03"
config BR2_TARGET_UBOOT_2009_11
bool "2009.11"
config BR2_TARGET_UBOOT_2009_08
bool "2009.08"
config BR2_TARGET_UBOOT_CUSTOM_TARBALL
bool "Custom tarball"
endchoice
if BR2_TARGET_UBOOT_CUSTOM_TARBALL
config BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION
string "URL of custom U-Boot tarball"
endif
config BR2_TARGET_UBOOT_VERSION
string
default "2010.06" if BR2_TARGET_UBOOT_2010_06
default "2010.03" if BR2_TARGET_UBOOT_2010_03
default "2009.11" if BR2_TARGET_UBOOT_2009_11
default "2009.08" if BR2_TARGET_UBOOT_2009_08
default "custom" if BR2_TARGET_UBOOT_CUSTOM_TARBALL
config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR
string "custom patch dir"
help
If your board requires custom patches, add the path to the
directory containing the patches here. The patches must be
named u-boot-<version>-<something>.patch.
Most users may leave this empty
config BR2_TARGET_UBOOT_TOOL_MKIMAGE
bool "mkimage tool in target"
help
Install mkimage tool in target.
config BR2_TARGET_UBOOT_TOOL_ENV
bool "fw_printenv tool in target"
help
Install fw_printenv / fw_setenv tools in target.
menuconfig BR2_TARGET_UBOOT_NETWORK
bool "Network Settings"
default y
help
Network settings for U-boot
if BR2_TARGET_UBOOT_NETWORK
config BR2_TARGET_UBOOT_SERVERIP
string "server ip"
default "10.175.196.221"
help
TFTP server ip address
config BR2_TARGET_UBOOT_IPADDR
string "ip address"
default "10.175.196.18"
help
Target ip address
config BR2_TARGET_UBOOT_GATEWAY
string "gateway ip"
default "10.175.196.1"
help
Gateway ip address
config BR2_TARGET_UBOOT_NETMASK
string "netmask"
default "255.255.255.0"
help
Network Mask
config BR2_TARGET_UBOOT_ETHADDR
string "ethernet address"
default "04:25:fe:ed:00:18"
help
Target MAC address for the ethernet interface.
This should be changed for production units
config BR2_TARGET_UBOOT_ETH1ADDR
string "ethernet 2 address"
help
Target MAC address for the second ethernet interface.
endif # BR2_TARGET_UBOOT_NETWORK
endif # BR2_TARGET_UBOOT