NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
12425af329
kumquat-buildroot/board/orangepi/orangepi-pc
History
Peter Korsgaard 91887cf778 orangepi_pc_defconfig: bump linux to 4.19.3, u-boot to 2018.11 
4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the
driver for the sy8106a regulator used on the board or enable the ondemand
cpufreq govenor so the frequency is dynamically adjusted - So enable these in
linux.fragment.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-23 10:48:00 +01:00
..
boot.cmd orangepipc: rename to orangepi-pc 2016-12-15 17:11:00 +01:00
genimage.cfg orangepipc: rename to orangepi-pc 2016-12-15 17:11:00 +01:00
linux.fragment orangepi_pc_defconfig: bump linux to 4.19.3, u-boot to 2018.11 2018-11-23 10:48:00 +01:00
readme.txt orangepipc: rename to orangepi-pc 2016-12-15 17:11:00 +01:00

readme.txt 

OrangePi PC

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the OrangePi PC. With the current configuration
it will bring-up the board, and allow access through the serial console.

How to build it
===============

Configure Buildroot:

    $ make orangepi_pc_defconfig

Compile everything and build the SD card image:

    $ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX