kumquat-buildroot

NetCube-Systems-Austria/kumquat-buildroot

History

Kory Maincent 8f088e6841 configs/octavo_osd32mp1_red: update BSP components Update description: TF-A to v2.4-stm32mp-r1 U-boot to version v2020.10-stm32mp-r2.1 Linux to v5.10-stm32mp-r2.1 This patch also updates U-boot to to use FIP image. Reference: https://octavosystems.com/octavo_products/osd32mp1-red/ The device tree blobs, and the U-boot patches come from Octavo System: https://github.com/octavosystems/meta-octavo-osd32mp1 Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>		2022-10-06 22:02:03 +02:00
..
linux-dts	configs/octavo_osd32mp1_red: update BSP components	2022-10-06 22:02:03 +02:00
overlay/boot/extlinux	configs/octavo_osd32mp1_red: update BSP components	2022-10-06 22:02:03 +02:00
patches/uboot	configs/octavo_osd32mp1_red: update BSP components	2022-10-06 22:02:03 +02:00
tfa-dts	configs/octavo_osd32mp1_red: update BSP components	2022-10-06 22:02:03 +02:00
genimage.cfg	configs/octavo_osd32mp1_red: update BSP components	2022-10-06 22:02:03 +02:00
readme.txt

readme.txt

OSD32MP1-RED

Intro
=====

This configuration supports the OSD32MP1-RED platform:

  https://octavosystems.com/octavo_products/osd32mp1-red/

How to build
============

 $ make octavo_osd32mp1_red_defconfig
 $ make

How to write the microSD card
=============================

Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.

Copy the bootable "sdcard.img" onto an microSD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

Boot the board
==============

 (1) Insert the microSD card in connector X5.

 (2) Plug an USB-SERIAL cable in the JP4 pin connector and run your serial
     communication program on /dev/ttySTM0.

 (3) Plug an USB-C cable in the J2 connector or use barrel power supply to
     power-up the board.

 (4) The system will start, with the console on UART.