|
…
|
||
|---|---|---|
| .. | ||
| rootfs_overlay/lib/firmware/brcm | ||
| extlinux.conf | ||
| genimage.cfg | ||
| linux-extras.config | ||
| post-build.sh | ||
| readme.txt | ||
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Nanopi NEO Plus2. With the current configuration
it will bring-up the board, and allow access through the serial console.
Nanopi NEO2 link:
http://nanopi.io/nanopi-neo-plus2.html
Wiki link:
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make friendlyarm_nanopi_neo_plus2_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
is on the serial line, 115200 8N1.