kumquat-buildroot/package/pkg-generic.mk
Arnout Vandecappelle 79bfcd5560 pkg-infra: correct the source name for host-only packages
Host-only package that don't define their <PKG>_SOURCE variable would
default to host-<pkg>-<version>.tar.gz.  It's more logical to remove
the host- prefix in this case.

This problem is most apparent with host-only packages downloaded from
version control, because they never define <PKG>_SOURCE.

Reported by Thomas Petazzoni and initial analysis by Luca Ceresoli.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-10-15 10:21:33 +02:00

527 lines
17 KiB
Makefile

################################################################################
# Generic package infrastructure
#
# This file implements an infrastructure that eases development of
# package .mk files. It should be used for packages that do not rely
# on a well-known build system for which Buildroot has a dedicated
# infrastructure (so far, Buildroot has special support for
# autotools-based and CMake-based packages).
#
# See the Buildroot documentation for details on the usage of this
# infrastructure
#
# In terms of implementation, this generic infrastructure requires the
# .mk file to specify:
#
# 1. Metadata informations about the package: name, version,
# download URL, etc.
#
# 2. Description of the commands to be executed to configure, build
# and install the package
################################################################################
################################################################################
# Implicit targets -- produce a stamp file for each step of a package build
################################################################################
# Retrieve the archive
$(BUILD_DIR)/%/.stamp_downloaded:
ifeq ($(DL_MODE),DOWNLOAD)
# Only show the download message if it isn't already downloaded
$(Q)(test -e $(DL_DIR)/$($(PKG)_SOURCE) && \
(test -z $($(PKG)_PATCH) || test -e $(DL_DIR)$($(PKG)_PATCH))) || \
$(call MESSAGE,"Downloading")
endif
$(if $($(PKG)_SOURCE),$(call DOWNLOAD,$($(PKG)_SITE)/$($(PKG)_SOURCE)))
$(if $($(PKG)_PATCH),$(call DOWNLOAD,$($(PKG)_SITE)/$($(PKG)_PATCH)))
$(foreach hook,$($(PKG)_POST_DOWNLOAD_HOOKS),$(call $(hook))$(sep))
ifeq ($(DL_MODE),DOWNLOAD)
$(Q)mkdir -p $(@D)
$(Q)touch $@
endif
# Unpack the archive
$(BUILD_DIR)/%/.stamp_extracted:
@$(call MESSAGE,"Extracting")
$(Q)mkdir -p $(@D)
$($(PKG)_EXTRACT_CMDS)
# some packages have messed up permissions inside
$(Q)chmod -R +rw $(@D)
$(foreach hook,$($(PKG)_POST_EXTRACT_HOOKS),$(call $(hook))$(sep))
$(Q)touch $@
# Rsync the source directory if the <pkg>_OVERRIDE_SRCDIR feature is
# used.
$(BUILD_DIR)/%/.stamp_rsynced:
@$(call MESSAGE,"Syncing from source dir $(SRCDIR)")
@test -d $(SRCDIR) || (echo "ERROR: $(SRCDIR) does not exist" ; exit 1)
rsync -au $(SRCDIR)/ $(@D)
$(Q)touch $@
# Handle the SOURCE_CHECK and SHOW_EXTERNAL_DEPS cases for rsynced
# packages
$(BUILD_DIR)/%/.stamp_rsync_sourced:
ifeq ($(DL_MODE),SOURCE_CHECK)
test -d $(SRCDIR)
else ifeq ($(DL_MODE),SHOW_EXTERNAL_DEPS)
echo "file://$(SRCDIR)"
else
@true # Nothing to do to source a local package
endif
# Patch
#
# The RAWNAME variable is the lowercased package name, which allows to
# find the package directory (typically package/<pkgname>) and the
# prefix of the patches
$(BUILD_DIR)/%/.stamp_patched: NAMEVER = $(RAWNAME)-$($(PKG)_VERSION)
$(BUILD_DIR)/%/.stamp_patched:
@$(call MESSAGE,"Patching $($(PKG)_DIR_PREFIX)/$(RAWNAME)")
$(foreach hook,$($(PKG)_PRE_PATCH_HOOKS),$(call $(hook))$(sep))
$(if $($(PKG)_PATCH),support/scripts/apply-patches.sh $(@D) $(DL_DIR) $($(PKG)_PATCH))
$(Q)( \
if test -d $($(PKG)_DIR_PREFIX)/$(RAWNAME); then \
if test "$(wildcard $($(PKG)_DIR_PREFIX)/$(RAWNAME)/$(NAMEVER)*.patch*)"; then \
support/scripts/apply-patches.sh $(@D) $($(PKG)_DIR_PREFIX)/$(RAWNAME) $(NAMEVER)\*.patch $(NAMEVER)\*.patch.$(ARCH) || exit 1; \
else \
support/scripts/apply-patches.sh $(@D) $($(PKG)_DIR_PREFIX)/$(RAWNAME) $(RAWNAME)\*.patch $(RAWNAME)\*.patch.$(ARCH) || exit 1; \
if test -d $($(PKG)_DIR_PREFIX)/$(RAWNAME)/$(NAMEVER); then \
support/scripts/apply-patches.sh $(@D) $($(PKG)_DIR_PREFIX)/$(RAWNAME)/$(NAMEVER) \*.patch \*.patch.$(ARCH) || exit 1; \
fi; \
fi; \
fi; \
)
$(foreach hook,$($(PKG)_POST_PATCH_HOOKS),$(call $(hook))$(sep))
$(Q)touch $@
# Configure
$(BUILD_DIR)/%/.stamp_configured:
$(foreach hook,$($(PKG)_PRE_CONFIGURE_HOOKS),$(call $(hook))$(sep))
@$(call MESSAGE,"Configuring")
$($(PKG)_CONFIGURE_CMDS)
$(foreach hook,$($(PKG)_POST_CONFIGURE_HOOKS),$(call $(hook))$(sep))
$(Q)touch $@
# Build
$(BUILD_DIR)/%/.stamp_built::
@$(call MESSAGE,"Building")
$($(PKG)_BUILD_CMDS)
$(foreach hook,$($(PKG)_POST_BUILD_HOOKS),$(call $(hook))$(sep))
$(Q)touch $@
# Install to host dir
$(BUILD_DIR)/%/.stamp_host_installed:
@$(call MESSAGE,"Installing to host directory")
$($(PKG)_INSTALL_CMDS)
$(foreach hook,$($(PKG)_POST_INSTALL_HOOKS),$(call $(hook))$(sep))
$(Q)touch $@
# Install to staging dir
$(BUILD_DIR)/%/.stamp_staging_installed:
@$(call MESSAGE,"Installing to staging directory")
$($(PKG)_INSTALL_STAGING_CMDS)
$(foreach hook,$($(PKG)_POST_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep))
$(Q)touch $@
# Install to images dir
$(BUILD_DIR)/%/.stamp_images_installed:
@$(call MESSAGE,"Installing to images directory")
$($(PKG)_INSTALL_IMAGES_CMDS)
$(foreach hook,$($(PKG)_POST_INSTALL_IMAGES_HOOKS),$(call $(hook))$(sep))
$(Q)touch $@
# Install to target dir
$(BUILD_DIR)/%/.stamp_target_installed:
@$(call MESSAGE,"Installing to target")
$(if $(BR2_INIT_SYSTEMD),\
$($(PKG)_INSTALL_INIT_SYSTEMD))
$(if $(BR2_INIT_SYSV)$(BR2_INIT_BUSYBOX),\
$($(PKG)_INSTALL_INIT_SYSV))
$($(PKG)_INSTALL_TARGET_CMDS)
$(foreach hook,$($(PKG)_POST_INSTALL_TARGET_HOOKS),$(call $(hook))$(sep))
$(Q)touch $@
# Clean package
$(BUILD_DIR)/%/.stamp_cleaned:
@$(call MESSAGE,"Cleaning up")
$($(PKG)_CLEAN_CMDS)
rm -f $(@D)/.stamp_built
# Uninstall package from target and staging
# Uninstall commands tend to fail, so remove the stamp files first
$(BUILD_DIR)/%/.stamp_uninstalled:
@$(call MESSAGE,"Uninstalling")
rm -f $($(PKG)_TARGET_INSTALL_STAGING)
rm -f $($(PKG)_TARGET_INSTALL_TARGET)
$($(PKG)_UNINSTALL_STAGING_CMDS)
$($(PKG)_UNINSTALL_TARGET_CMDS)
$(if $(BR2_INIT_SYSTEMD),\
$($(PKG)_UNINSTALL_INIT_SYSTEMD))
$(if $(BR2_INIT_SYSV)$(BR2_INIT_BUSYBOX),\
$($(PKG)_UNINSTALL_INIT_SYSV))
# Remove package sources
$(BUILD_DIR)/%/.stamp_dircleaned:
rm -Rf $(@D)
################################################################################
# inner-generic-package -- generates the make targets needed to build a
# generic package
#
# argument 1 is the lowercase package name
# argument 2 is the uppercase package name, including an HOST_ prefix
# for host packages
# argument 3 is the uppercase package name, without the HOST_ prefix
# for host packages
# argument 4 is the package directory prefix
# argument 5 is the type (target or host)
################################################################################
define inner-generic-package
# Define default values for various package-related variables, if not
# already defined. For some variables (version, source, site and
# subdir), if they are undefined, we try to see if a variable without
# the HOST_ prefix is defined. If so, we use such a variable, so that
# these informations have only to be specified once, for both the
# target and host packages of a given .mk file.
$(2)_TYPE = $(5)
$(2)_NAME = $(1)
$(2)_RAWNAME = $(patsubst host-%,%,$(1))
# Keep the package version that may contain forward slashes in the _DL_VERSION
# variable, then replace all forward slashes ('/') by underscores ('_') to
# sanitize the package version that is used in paths, directory and file names.
# Forward slashes may appear in the package's version when pointing to a
# version control system branch or tag, for example remotes/origin/1_10_stable.
ifndef $(2)_VERSION
ifdef $(3)_VERSION
$(2)_DL_VERSION = $($(3)_VERSION)
$(2)_VERSION = $(subst /,_,$($(3)_VERSION))
else
$(2)_VERSION = undefined
$(2)_DL_VERSION = undefined
endif
else
$(2)_DL_VERSION = $($(2)_VERSION)
$(2)_VERSION = $(subst /,_,$($(2)_VERSION))
endif
$(2)_BASE_NAME = $(1)-$$($(2)_VERSION)
$(2)_DL_DIR = $$(DL_DIR)/$$($(2)_BASE_NAME)
$(2)_DIR = $$(BUILD_DIR)/$$($(2)_BASE_NAME)
ifndef $(2)_SUBDIR
ifdef $(3)_SUBDIR
$(2)_SUBDIR = $$($(3)_SUBDIR)
else
$(2)_SUBDIR ?=
endif
endif
$(2)_SRCDIR = $$($(2)_DIR)/$$($(2)_SUBDIR)
$(2)_BUILDDIR ?= $$($(2)_SRCDIR)
ifneq ($$($(2)_OVERRIDE_SRCDIR),)
$(2)_VERSION = custom
endif
ifndef $(2)_SOURCE
ifdef $(3)_SOURCE
$(2)_SOURCE = $($(3)_SOURCE)
else
$(2)_SOURCE ?= $$($(2)_RAWNAME)-$$($(2)_VERSION).tar.gz
endif
endif
ifndef $(2)_PATCH
ifdef $(3)_PATCH
$(2)_PATCH = $($(3)_PATCH)
endif
endif
ifndef $(2)_SITE
ifdef $(3)_SITE
$(2)_SITE = $($(3)_SITE)
endif
endif
ifndef $(2)_SITE_METHOD
ifdef $(3)_SITE_METHOD
$(2)_SITE_METHOD = $($(3)_SITE_METHOD)
else
# Try automatic detection using the scheme part of the URI
$(2)_SITE_METHOD = $(firstword $(subst ://, ,$(call qstrip,$($(2)_SITE))))
endif
endif
ifeq ($$($(2)_SITE_METHOD),local)
ifeq ($$($(2)_OVERRIDE_SRCDIR),)
$(2)_OVERRIDE_SRCDIR = $($(2)_SITE)
endif
endif
ifndef $(2)_LICENSE
ifdef $(3)_LICENSE
$(2)_LICENSE = $($(3)_LICENSE)
endif
endif
ifndef $(2)_LICENSE_FILES
ifdef $(3)_LICENSE_FILES
$(2)_LICENSE_FILES = $($(3)_LICENSE_FILES)
endif
endif
$(2)_LICENSE ?= unknown
$(2)_DEPENDENCIES ?= $(filter-out $(1),$(patsubst host-host-%,host-%,$(addprefix host-,$($(3)_DEPENDENCIES))))
$(2)_INSTALL_STAGING ?= NO
$(2)_INSTALL_IMAGES ?= NO
$(2)_INSTALL_TARGET ?= YES
$(2)_DIR_PREFIX = $(if $(4),$(4),$(TOP_SRCDIR)/package)
# define sub-target stamps
$(2)_TARGET_INSTALL_TARGET = $$($(2)_DIR)/.stamp_target_installed
$(2)_TARGET_INSTALL_STAGING = $$($(2)_DIR)/.stamp_staging_installed
$(2)_TARGET_INSTALL_IMAGES = $$($(2)_DIR)/.stamp_images_installed
$(2)_TARGET_INSTALL_HOST = $$($(2)_DIR)/.stamp_host_installed
$(2)_TARGET_BUILD = $$($(2)_DIR)/.stamp_built
$(2)_TARGET_CONFIGURE = $$($(2)_DIR)/.stamp_configured
$(2)_TARGET_RSYNC = $$($(2)_DIR)/.stamp_rsynced
$(2)_TARGET_RSYNC_SOURCE = $$($(2)_DIR)/.stamp_rsync_sourced
$(2)_TARGET_PATCH = $$($(2)_DIR)/.stamp_patched
$(2)_TARGET_EXTRACT = $$($(2)_DIR)/.stamp_extracted
$(2)_TARGET_SOURCE = $$($(2)_DIR)/.stamp_downloaded
$(2)_TARGET_UNINSTALL = $$($(2)_DIR)/.stamp_uninstalled
$(2)_TARGET_CLEAN = $$($(2)_DIR)/.stamp_cleaned
$(2)_TARGET_DIRCLEAN = $$($(2)_DIR)/.stamp_dircleaned
# default extract command
$(2)_EXTRACT_CMDS ?= \
$$(if $$($(2)_SOURCE),$$(INFLATE$$(suffix $$($(2)_SOURCE))) $(DL_DIR)/$$($(2)_SOURCE) | \
$(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $$($(2)_DIR) $(TAR_OPTIONS) -)
# post-steps hooks
$(2)_POST_DOWNLOAD_HOOKS ?=
$(2)_POST_EXTRACT_HOOKS ?=
$(2)_PRE_PATCH_HOOKS ?=
$(2)_POST_PATCH_HOOKS ?=
$(2)_PRE_CONFIGURE_HOOKS ?=
$(2)_POST_CONFIGURE_HOOKS ?=
$(2)_POST_BUILD_HOOKS ?=
$(2)_POST_INSTALL_HOOKS ?=
$(2)_POST_INSTALL_STAGING_HOOKS ?=
$(2)_POST_INSTALL_TARGET_HOOKS ?=
$(2)_POST_INSTALL_IMAGES_HOOKS ?=
# human-friendly targets and target sequencing
$(1): $(1)-install
ifeq ($$($(2)_TYPE),host)
$(1)-install: $(1)-install-host
else
$(1)-install: $(1)-install-staging $(1)-install-target $(1)-install-images
endif
ifeq ($$($(2)_INSTALL_TARGET),YES)
$(1)-install-target: $(1)-build \
$$($(2)_TARGET_INSTALL_TARGET)
else
$(1)-install-target:
endif
ifeq ($$($(2)_INSTALL_STAGING),YES)
$(1)-install-staging: $(1)-build \
$$($(2)_TARGET_INSTALL_STAGING)
else
$(1)-install-staging:
endif
ifeq ($$($(2)_INSTALL_IMAGES),YES)
$(1)-install-images: $(1)-build \
$$($(2)_TARGET_INSTALL_IMAGES)
else
$(1)-install-images:
endif
$(1)-install-host: $(1)-build $$($(2)_TARGET_INSTALL_HOST)
$(1)-build: $(1)-configure \
$$($(2)_TARGET_BUILD)
ifeq ($$($(2)_OVERRIDE_SRCDIR),)
# In the normal case (no package override), the sequence of steps is
# source, by downloading
# depends
# extract
# patch
# configure
$(1)-configure: $(1)-patch $(1)-depends \
$$($(2)_TARGET_CONFIGURE)
$(1)-patch: $(1)-extract $$($(2)_TARGET_PATCH)
$(1)-extract: $(1)-source \
$$($(2)_TARGET_EXTRACT)
$(1)-depends: $$($(2)_DEPENDENCIES)
$(1)-source: $$($(2)_TARGET_SOURCE)
else
# In the package override case, the sequence of steps
# source, by rsyncing
# depends
# configure
$(1)-configure: $(1)-depends \
$$($(2)_TARGET_CONFIGURE)
$(1)-depends: $(1)-rsync $$($(2)_DEPENDENCIES)
$(1)-rsync: $$($(2)_TARGET_RSYNC)
$(1)-source: $$($(2)_TARGET_RSYNC_SOURCE)
endif
$(1)-show-depends:
@echo $$($(2)_DEPENDENCIES)
$(1)-uninstall: $(1)-configure $$($(2)_TARGET_UNINSTALL)
$(1)-clean: $(1)-uninstall \
$$($(2)_TARGET_CLEAN)
$(1)-dirclean: $$($(2)_TARGET_DIRCLEAN)
$(1)-clean-for-rebuild:
ifneq ($$($(2)_OVERRIDE_SRCDIR),)
rm -f $$($(2)_TARGET_RSYNC)
endif
rm -f $$($(2)_TARGET_BUILD)
rm -f $$($(2)_TARGET_INSTALL_STAGING)
rm -f $$($(2)_TARGET_INSTALL_TARGET)
rm -f $$($(2)_TARGET_INSTALL_IMAGES)
rm -f $$($(2)_TARGET_INSTALL_HOST)
$(1)-rebuild: $(1)-clean-for-rebuild all
$(1)-clean-for-reconfigure: $(1)-clean-for-rebuild
rm -f $$($(2)_TARGET_CONFIGURE)
$(1)-reconfigure: $(1)-clean-for-reconfigure all
# define the PKG variable for all targets, containing the
# uppercase package variable prefix
$$($(2)_TARGET_INSTALL_TARGET): PKG=$(2)
$$($(2)_TARGET_INSTALL_STAGING): PKG=$(2)
$$($(2)_TARGET_INSTALL_IMAGES): PKG=$(2)
$$($(2)_TARGET_INSTALL_HOST): PKG=$(2)
$$($(2)_TARGET_BUILD): PKG=$(2)
$$($(2)_TARGET_CONFIGURE): PKG=$(2)
$$($(2)_TARGET_RSYNC): SRCDIR=$$($(2)_OVERRIDE_SRCDIR)
$$($(2)_TARGET_RSYNC): PKG=$(2)
$$($(2)_TARGET_RSYNC_SOURCE): SRCDIR=$$($(2)_OVERRIDE_SRCDIR)
$$($(2)_TARGET_RSYNC_SOURCE): PKG=$(2)
$$($(2)_TARGET_PATCH): PKG=$(2)
$$($(2)_TARGET_PATCH): RAWNAME=$(patsubst host-%,%,$(1))
$$($(2)_TARGET_EXTRACT): PKG=$(2)
$$($(2)_TARGET_SOURCE): PKG=$(2)
$$($(2)_TARGET_UNINSTALL): PKG=$(2)
$$($(2)_TARGET_CLEAN): PKG=$(2)
$$($(2)_TARGET_DIRCLEAN): PKG=$(2)
# Compute the name of the Kconfig option that correspond to the
# package being enabled. We handle three cases: the special Linux
# kernel case, the bootloaders case, and the normal packages case.
ifeq ($(1),linux)
$(2)_KCONFIG_VAR = BR2_LINUX_KERNEL
else ifeq ($(4),boot/)
$(2)_KCONFIG_VAR = BR2_TARGET_$(2)
else
$(2)_KCONFIG_VAR = BR2_PACKAGE_$(2)
endif
# legal-info: declare dependencies and set values used later for the manifest
ifneq ($$($(2)_LICENSE),PROPRIETARY)
ifneq ($$($(2)_SITE_METHOD),local)
ifneq ($$($(2)_SITE_METHOD),override)
# Packages that have a tarball need it downloaded and extracted beforehand
$(1)-legal-info: $(1)-extract $(REDIST_SOURCES_DIR)
$(2)_MANIFEST_TARBALL = $$($(2)_SOURCE)
ifneq ($$($(2)_LICENSE_FILES),)
$(2)_MANIFEST_LICENSE_FILES = $$($(2)_LICENSE_FILES)
endif
endif
endif
endif
# defaults for packages without tarball or license files
$(2)_MANIFEST_TARBALL ?= not saved
$(2)_MANIFEST_LICENSE_FILES ?= not saved
# legal-info: produce legally relevant info.
$(1)-legal-info:
# Packages without a source are assumed to be part of Buildroot, skip them.
ifneq ($(call qstrip,$$($(2)_SOURCE)),)
ifeq ($$($(2)_LICENSE),PROPRIETARY)
# Proprietary packages: nothing to save
else ifeq ($$($(2)_SITE_METHOD),local)
# Packages without a tarball: don't save and warn
@$(call legal-warning-pkg-savednothing,$$($(2)_RAWNAME),local)
else ifeq ($$($(2)_SITE_METHOD),override)
@$(call legal-warning-pkg-savednothing,$$($(2)_RAWNAME),override)
else
# Other packages
# Save license files if defined
ifeq ($(call qstrip,$$($(2)_LICENSE_FILES)),)
@$(call legal-license-nofiles,$$($(2)_RAWNAME))
@$(call legal-warning-pkg,$$($(2)_RAWNAME),cannot save license ($(2)_LICENSE_FILES not defined))
else
@for F in $$($(2)_LICENSE_FILES); do \
$(call legal-license-file,$$($(2)_RAWNAME),$$$${F},$$($(2)_DIR)/$$$${F}); \
done
endif
# Copy the source tarball (just hardlink if possible)
@cp -l $(DL_DIR)/$$($(2)_SOURCE) $(REDIST_SOURCES_DIR) 2>/dev/null || \
cp $(DL_DIR)/$$($(2)_SOURCE) $(REDIST_SOURCES_DIR)
endif
@$(call legal-manifest,$$($(2)_RAWNAME),$$($(2)_VERSION),$$($(2)_LICENSE),$$($(2)_MANIFEST_LICENSE_FILES),$$($(2)_MANIFEST_TARBALL))
endif # ifneq ($(call qstrip,$$($(2)_SOURCE)),)
# add package to the general list of targets if requested by the buildroot
# configuration
ifeq ($$($$($(2)_KCONFIG_VAR)),y)
TARGETS += $(1)
PACKAGES_PERMISSIONS_TABLE += $$($(2)_PERMISSIONS)$$(sep)
PACKAGES_DEVICES_TABLE += $$($(2)_DEVICES)$$(sep)
ifeq ($$($(2)_SITE_METHOD),svn)
DL_TOOLS_DEPENDENCIES += svn
else ifeq ($$($(2)_SITE_METHOD),git)
DL_TOOLS_DEPENDENCIES += git
else ifeq ($$($(2)_SITE_METHOD),bzr)
DL_TOOLS_DEPENDENCIES += bzr
else ifeq ($$($(2)_SITE_METHOD),scp)
DL_TOOLS_DEPENDENCIES += scp ssh
else ifeq ($$($(2)_SITE_METHOD),hg)
DL_TOOLS_DEPENDENCIES += hg
endif # SITE_METHOD
DL_TOOLS_DEPENDENCIES += $(firstword $(INFLATE$(suffix $($(2)_SOURCE))))
endif # $(2)_KCONFIG_VAR
endef # inner-generic-package
################################################################################
# generic-package -- the target generator macro for generic packages
################################################################################
# In the case of target packages, keep the package name "pkg"
generic-package = $(call inner-generic-package,$(call pkgname),$(call UPPERCASE,$(call pkgname)),$(call UPPERCASE,$(call pkgname)),$(call pkgparentdir),target)
# In the case of host packages, turn the package name "pkg" into "host-pkg"
host-generic-package = $(call inner-generic-package,host-$(call pkgname),$(call UPPERCASE,host-$(call pkgname)),$(call UPPERCASE,$(call pkgname)),$(call pkgparentdir),host)
# :mode=makefile: