Pandaboard
==========
This file documents the Buildroot support for the Pandaboard, a
low-power, low-cost single-board computer development platform based
on the Texas Instruments OMAP4 system on a chip (SoC).
Configuring and building Buildroot
----------------------------------
Start from the defconfig:
$ make pandaboard_defconfig
You can edit build options the usual way:
$ make menuconfig
When you are happy with the setup, run:
$ make
The result of the build with the default settings should be these files:
output/images
+-- MLO
+-- omap4-panda-a4.dtb
+-- omap4-panda.dtb
+-- omap4-panda-es.dtb
+-- rootfs.ext4
+-- sdcard.img
+-- u-boot.img
+-- zImage
How to write the SD card
------------------------
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
Where /dev/sdX is the device node of your SD card (may be /dev/mmcblkX
instead depending on setup).
dff08793ee