kumquat-buildroot/board/wandboard/readme.txt
Stephan Hoffmann fd4a399e4d board: add support for the i.MX6 Wandboard platform
Wandboard is a low cost iMX6 system consiting of an EDM standard
processor module and a small base board.

http://www.wandboard.org

Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2013-08-23 06:54:33 +02:00

38 lines
1.1 KiB
Plaintext

Minimal board support for the Wandboard
Wandboard's homepage is here: http://www.wandboard.org/
This config is only tested with the dual core wandboard.
Installing:
You need a micro SD card and a slot/adapter for your development machine.
Partition the SD card leaving at least 1 MB in front of the first partition.
Partition layout (example):
Disk /dev/sdi: 3965 MB, 3965190144 bytes
255 heads, 63 sectors/track, 482 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x77b47445
Device Boot Start End Blocks Id System
/dev/sdi1 2 482 3863632+ 83 Linux
Copy u-boot and its environment to the SD card:
sudo dd if=output/images/u-boot.imx bs=512 seek=2 of=/dev/sd<x>
sudo dd if=output/images/uboot-env.bin bs=512 seek=768 of=/dev/sd<x>
Copy the root filesystem:
sudo dd if=output/images/rootfs.ext2 of=/dev/sd<x>1
Alternative commands to copy root filesystem:
sudo mkfs.ext4 /dev/sd<x>1
sudo mount /dev/sd<x>1 /mnt
sudo tar xf output/images/rootfs.tar -C /mnt
sudo umount /mnt