NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
063e2855bc
kumquat-buildroot/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.10/linux-2.6.22.10-501-atmel_mci-minor-fixes-and-cleanups.patch
Ulf Samuelsson 022b104152 Add 2.6.22.10 and 2.6.23 support
2007-10-12 15:10:27 +00:00

291 lines
9.8 KiB
Diff
Raw Blame History

From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Subject: [PATCH 1/2] atmel_mci: Minor fixes and cleanups
* Use ios->clock to define when to enable the controller instead of
ios->power_mode.
* Send initialization command (74 idle clock cycles) when power_mode
is set to MMC_POWER_ON.
* Use dev_dbg() and friends instead of pr_debug() and printk().
* Don't print data- or probe errors when debugging is not enabled.
* Adjust ocr_avail range to 3.2V-3.4V using proper constants.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
drivers/mmc/host/atmel-mci.c | 120 ++++++++++++++++++++++-------------------
1 files changed, 64 insertions(+), 56 deletions(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 74d343f..1dc91b4 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -464,9 +464,8 @@ static void atmci_set_timeout(struct atmel_mci *host,
dtocyc = 15;
}
- pr_debug("%s: setting timeout to %u cycles\n",
- mmc_hostname(host->mmc),
- dtocyc << dtomul_to_shift[dtomul]);
+ dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
+ dtocyc << dtomul_to_shift[dtomul]);
mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
| MCI_BF(DTOCYC, dtocyc)));
}
@@ -508,9 +507,9 @@ static u32 atmci_prepare_command(struct mmc_host *mmc,
if (!(cmd->flags & MMC_RSP_CRC))
iflags &= ~MCI_BIT(RCRCE);
- pr_debug("%s: cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
- mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags,
- (unsigned long)cmdr);
+ dev_dbg(&mmc->class_dev,
+ "cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
+ cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
*cmd_flags = cmdr;
return iflags;
@@ -589,7 +588,8 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
iflags = mci_readl(host, IMR);
if (iflags)
- printk("WARNING: IMR=0x%08x\n", mci_readl(host, IMR));
+ dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
+ mci_readl(host, IMR));
WARN_ON(host->mrq != NULL);
host->mrq = mrq;
@@ -623,16 +623,30 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct atmel_mci *host = mmc_priv(mmc);
+ u32 mr;
if (ios->clock) {
u32 clkdiv;
+ /* Set clock rate */
clkdiv = host->bus_hz / (2 * ios->clock) - 1;
- if (clkdiv > 255)
+ if (clkdiv > 255) {
+ dev_warn(&mmc->class_dev,
+ "clock %u too slow; using %lu\n",
+ ios->clock, host->bus_hz / (2 * 256));
clkdiv = 255;
- mci_writel(host, MR, (clkdiv
- | MCI_BIT(WRPROOF)
- | MCI_BIT(RDPROOF)));
+ }
+
+ mr = mci_readl(host, MR);
+ mr = MCI_BFINS(CLKDIV, clkdiv, mr)
+ | MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
+ mci_writel(host, MR, mr);
+
+ /* Enable the MCI controller */
+ mci_writel(host, CR, MCI_BIT(MCIEN));
+ } else {
+ /* Disable the MCI controller */
+ mci_writel(host, CR, MCI_BIT(MCIDIS));
}
switch (ios->bus_width) {
@@ -645,14 +659,19 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
switch (ios->power_mode) {
- case MMC_POWER_OFF:
- mci_writel(host, CR, MCI_BIT(MCIDIS));
- break;
- case MMC_POWER_UP:
- mci_writel(host, CR, MCI_BIT(SWRST));
- break;
case MMC_POWER_ON:
- mci_writel(host, CR, MCI_BIT(MCIEN));
+ /* Send init sequence (74 clock cycles) */
+ mci_writel(host, IDR, ~0UL);
+ mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
+ while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
+ cpu_relax();
+ break;
+ default:
+ /*
+ * TODO: None of the currently available AVR32-based
+ * boards allow MMC power to be turned off. Implement
+ * power control when this can be tested properly.
+ */
break;
}
}
@@ -664,11 +683,12 @@ static int atmci_get_ro(struct mmc_host *mmc)
if (host->wp_pin >= 0) {
read_only = gpio_get_value(host->wp_pin);
- pr_debug("%s: card is %s\n", mmc_hostname(mmc),
- read_only ? "read-only" : "read-write");
+ dev_dbg(&mmc->class_dev, "card is %s\n",
+ read_only ? "read-only" : "read-write");
} else {
- pr_debug("%s: no pin for checking read-only switch."
- " Assuming write-enable.\n", mmc_hostname(mmc));
+ dev_dbg(&mmc->class_dev,
+ "no pin for checking read-only switch."
+ " Assuming write-enable.\n");
}
return read_only;
@@ -719,8 +739,7 @@ static void atmci_command_error(struct mmc_host *mmc,
struct mmc_command *cmd,
u32 status)
{
- pr_debug("%s: command error: status=0x%08x\n",
- mmc_hostname(mmc), status);
+ dev_dbg(&mmc->class_dev, "command error: status=0x%08x\n", status);
if (status & MCI_BIT(RTOE))
cmd->error = MMC_ERR_TIMEOUT;
@@ -737,7 +756,8 @@ static void atmci_tasklet_func(unsigned long priv)
struct mmc_request *mrq = host->mrq;
struct mmc_data *data = host->data;
- pr_debug("atmci_tasklet: pending/completed/mask %lx/%lx/%x\n",
+ dev_dbg(&mmc->class_dev,
+ "tasklet: pending/completed/mask %lx/%lx/%x\n",
host->pending_events, host->completed_events,
mci_readl(host, IMR));
@@ -784,8 +804,8 @@ static void atmci_tasklet_func(unsigned long priv)
/* DMA controller got bus error => invalid address */
data->error = MMC_ERR_INVALID;
- printk(KERN_DEBUG "%s: dma error after %u bytes xfered\n",
- mmc_hostname(mmc), host->data->bytes_xfered);
+ dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
+ host->data->bytes_xfered);
if (data->stop
&& !mci_set_stop_sent_is_completed(host))
@@ -803,24 +823,18 @@ static void atmci_tasklet_func(unsigned long priv)
dma_stop_request(host->dma.req.req.dmac,
host->dma.req.req.channel);
- printk(KERN_DEBUG "%s: data error: status=0x%08x\n",
- mmc_hostname(host->mmc), status);
-
if (status & MCI_BIT(DCRCE)) {
- printk(KERN_DEBUG "%s: Data CRC error\n",
- mmc_hostname(host->mmc));
+ dev_dbg(&mmc->class_dev, "data CRC error\n");
data->error = MMC_ERR_BADCRC;
} else if (status & MCI_BIT(DTOE)) {
- printk(KERN_DEBUG "%s: Data Timeout error\n",
- mmc_hostname(host->mmc));
+ dev_dbg(&mmc->class_dev, "data timeout error\n");
data->error = MMC_ERR_TIMEOUT;
} else {
- printk(KERN_DEBUG "%s: Data FIFO error\n",
- mmc_hostname(host->mmc));
+ dev_dbg(&mmc->class_dev, "data FIFO error\n");
data->error = MMC_ERR_FIFO;
}
- printk(KERN_DEBUG "%s: Bytes xfered: %u\n",
- mmc_hostname(host->mmc), data->bytes_xfered);
+ dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
+ data->bytes_xfered);
if (data->stop
&& !mci_set_stop_sent_is_completed(host))
@@ -998,8 +1012,8 @@ static irqreturn_t atmci_detect_change(int irq, void *dev_id)
int present = !gpio_get_value(irq_to_gpio(irq));
if (present != host->present) {
- pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
- present ? "inserted" : "removed");
+ dev_dbg(&mmc->class_dev, "card %s\n",
+ present ? "inserted" : "removed");
host->present = present;
mci_set_card_detect_pending(host);
tasklet_schedule(&host->tasklet);
@@ -1058,7 +1072,7 @@ static int __devinit atmci_probe(struct platform_device *pdev)
mmc->ops = &atmci_ops;
mmc->f_min = (host->bus_hz + 511) / 512;
mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
- mmc->ocr_avail = 0x00100000;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps |= MMC_CAP_4_BIT_DATA;
tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
@@ -1071,8 +1085,7 @@ static int __devinit atmci_probe(struct platform_device *pdev)
host->present = 1;
if (host->detect_pin >= 0) {
if (gpio_request(host->detect_pin, "mmc_detect")) {
- printk(KERN_WARNING "%s: no detect pin available\n",
- mmc_hostname(host->mmc));
+ dev_dbg(&mmc->class_dev, "no detect pin available\n");
host->detect_pin = -1;
} else {
host->present = !gpio_get_value(host->detect_pin);
@@ -1080,8 +1093,7 @@ static int __devinit atmci_probe(struct platform_device *pdev)
}
if (host->wp_pin >= 0) {
if (gpio_request(host->wp_pin, "mmc_wp")) {
- printk(KERN_WARNING "%s: no WP pin available\n",
- mmc_hostname(host->mmc));
+ dev_dbg(&mmc->class_dev, "no WP pin available\n");
host->wp_pin = -1;
}
}
@@ -1090,14 +1102,12 @@ static int __devinit atmci_probe(struct platform_device *pdev)
ret = -ENOMEM;
host->dma.req.req.dmac = find_dma_controller(0);
if (!host->dma.req.req.dmac) {
- printk(KERN_ERR
- "mmci: No DMA controller available, aborting\n");
+ dev_dbg(&mmc->class_dev, "no DMA controller available\n");
goto out_free_irq;
}
ret = dma_alloc_channel(host->dma.req.req.dmac);
if (ret < 0) {
- printk(KERN_ERR
- "mmci: Unable to allocate DMA channel, aborting\n");
+ dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
goto out_free_irq;
}
host->dma.req.req.channel = ret;
@@ -1110,7 +1120,6 @@ static int __devinit atmci_probe(struct platform_device *pdev)
mci_writel(host, CR, MCI_BIT(SWRST));
mci_writel(host, IDR, ~0UL);
- mci_writel(host, CR, MCI_BIT(MCIEN));
platform_set_drvdata(pdev, host);
@@ -1122,17 +1131,16 @@ static int __devinit atmci_probe(struct platform_device *pdev)
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
DRIVER_NAME, mmc);
if (ret) {
- printk(KERN_ERR
- "%s: could not request IRQ %d for detect pin\n",
- mmc_hostname(mmc),
- gpio_to_irq(host->detect_pin));
+ dev_dbg(&mmc->class_dev,
+ "could not request IRQ %d for detect pin\n",
+ gpio_to_irq(host->detect_pin));
gpio_free(host->detect_pin);
host->detect_pin = -1;
}
}
- printk(KERN_INFO "%s: Atmel MCI controller at 0x%08lx irq %d\n",
- mmc_hostname(mmc), host->mapbase, irq);
+ dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
+ host->mapbase, irq);
atmci_init_debugfs(host);
--
1.5.3.2
_______________________________________________
Kernel mailing list
Kernel@avr32linux.org
http://duppen.flaskehals.net/cgi-bin/mailman/listinfo/kernel
Reference in New Issue View Git Blame Copy Permalink