kumquat-buildroot/configs/at91sam9x5ek_mmc_dev_defconfig
Ludovic Desroches ece884a704 configs: at91sam9x5ek: new additional defconfigs
This commit:

 - Adds a development rootfs defconfig for the at91sam9x5ek board for
   NAND-based configurations.

 - Adds SD-card based configurations for the at91sam9x5ek board, both a
   minimal one and development one.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add at91sam9x5ek_mmc_defconfig to have all four combinations:
NAND minimal, NAND development, SD minimal, SD development.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-03-07 21:58:51 +01:00

103 lines
2.7 KiB
Plaintext

# Architecture
BR2_arm=y
BR2_arm926t=y
# Toolchain
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
# Needed for some packages
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# Needed for gdb
BR2_PTHREAD_DEBUG=y
# Needed for some packages
BR2_TOOLCHAIN_BUILDROOT_CXX=y
# System Configuration
# Needed for usb-utils
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
# Creation of the SD card image
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/atmel/at91sam9x5ek_mmc/post-image.sh"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux4sam/linux-at91.git"
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux4sam_5.5"
BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9g15ek at91sam9g25ek at91sam9g35ek at91sam9x25ek at91sam9x35ek"
# Packages
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_ALSA_UTILS=y
BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
BR2_PACKAGE_ALSA_UTILS_APLAY=y
BR2_PACKAGE_FFMPEG=y
BR2_PACKAGE_FFMPEG_GPL=y
BR2_PACKAGE_FFMPEG_SWSCALE=y
BR2_PACKAGE_MPG123=y
BR2_PACKAGE_BZIP2=y
BR2_PACKAGE_GZIP=y
BR2_PACKAGE_UNZIP=y
BR2_PACKAGE_XZ=y
BR2_PACKAGE_ZIP=y
BR2_PACKAGE_GDB=y
BR2_PACKAGE_LMBENCH=y
BR2_PACKAGE_DOSFSTOOLS=y
BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y
BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y
BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
BR2_PACKAGE_MMC_UTILS=y
BR2_PACKAGE_MTD=y
BR2_PACKAGE_WILC1000_FIRMWARE=y
BR2_PACKAGE_DEVMEM2=y
BR2_PACKAGE_EVTEST=y
BR2_PACKAGE_I2C_TOOLS=y
BR2_PACKAGE_SETSERIAL=y
BR2_PACKAGE_SPI_TOOLS=y
BR2_PACKAGE_USBUTILS=y
BR2_PACKAGE_LIBDRM=y
BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y
BR2_PACKAGE_DTC=y
BR2_PACKAGE_DTC_PROGRAMS=y
BR2_PACKAGE_BLUEZ_UTILS=y
BR2_PACKAGE_BRIDGE_UTILS=y
BR2_PACKAGE_CAN_UTILS=y
BR2_PACKAGE_DROPBEAR=y
BR2_PACKAGE_ETHTOOL=y
BR2_PACKAGE_IPERF=y
BR2_PACKAGE_IPROUTE2=y
BR2_PACKAGE_IPTABLES=y
BR2_PACKAGE_IW=y
BR2_PACKAGE_LRZSZ=y
BR2_PACKAGE_MII_DIAG=y
BR2_PACKAGE_OPENSSH=y
BR2_PACKAGE_WGET=y
BR2_PACKAGE_WIRELESS_TOOLS=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_BASH=y
BR2_PACKAGE_HTOP=y
BR2_PACKAGE_VIM=y
# Filesystem
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# Bootloaders
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.7"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9x5eksd_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.5"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9x5ek_mmc"
# Host packages
# Needed to generate the SD card image
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y