kumquat-buildroot/board/technexion/imx6ulpico
Fabio Estevam 02bb84cb60 configs: imx6ulpico: Add Wifi support
imx6ulpico has a BCM4339 Wifi chip. Add Wifi support by default
to allow a better customer experience.

The dts patch has already been sent to the linux-arm-kernel list
and we can remove it once it reaches a mainline kernel (in
version 4.9 probably).

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-01 22:11:05 +02:00
..
patches/linux configs: imx6ulpico: Add Wifi support 2016-08-01 22:11:05 +02:00
rootfs_overlay/lib/firmware/brcm configs: imx6ulpico: Add Wifi support 2016-08-01 22:11:05 +02:00
genimage.cfg
linux.fragment configs: imx6ulpico: Add Wifi support 2016-08-01 22:11:05 +02:00
post-image.sh
readme.txt configs: imx6ulpico: Add Wifi support 2016-08-01 22:11:05 +02:00

*****************************
Technexion i.MX6UL Pico board
*****************************

This file documents the Buildroot support for the Technexion i.MX6UL Pico board.

Build
=====

First, configure Buildroot for the i.MX6UL Pico board:

  make imx6ulpico_defconfig

Build all components:

  make

You will find in output/images/ the following files:
  - imx6ul-pico-hobbit.dtb
  - rootfs.ext4
  - rootfs.tar
  - sdcard.img
  - u-boot.imx
  - zImage

Create a bootable SD card
=========================

In the U-Boot prompt lauch:

=> ums 0 mmc 0

This will mount the eMMC content in the host PC as a mass storage device.

To determine the device associated to the eMMC card have a look in the
/proc/partitions file:

  cat /proc/partitions

Buildroot prepares a bootable "sdcard.img" image in the output/images/
directory, ready to be dumped on the eMMC card. Launch the following
command as root:

  dd if=output/images/sdcard.img of=/dev/<your-sd-device>

*** WARNING! This will destroy all the card content. Use with care! ***

For details about the medium image layout, see the definition in
board/technexion/imx6ulpico/genimage.cfg.

Boot the i.MX6UL Pico board
=========================

To boot your newly created system:
- put a micro USB cable into the Debug USB Port and connect using a terminal
  emulator at 115200 bps, 8n1;
- power on the board.

Using Wifi
==========

# modprobe brcmfmac
# iwconfig wlan0 essid ACCESSPOINTNAME
# wpa_passphrase ACCESSPOINTNAME > /etc/wpa.conf
(enter the wifi password and press enter)
# wpa_supplicant -Dwext -iwlan0 -c /etc/wpa.conf &
# udhcpc -i wlan0
# ping buildroot.org

Enjoy!