NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
2024.05.x-kumquat
kumquat-buildroot/board/arrow/avenger96
History
Javad Rahimipetroudi b9b40901d1 configs/avenger96_defconfig: bump ATF version to v2.8 LTS 
This patch upgrades the ATF version to the v2.8 LTS version. Please note
that due to DTS changes from upstream commit
51e223058fe70b311542178f1865514745fa7874 ("feat(stm32mp15-fdts): add
Avenger96 board with STM32MP157A DHCOR SoM") The ATF additional build
variable is also modified to use the new DTS file. Note that the old DTS
file still exists, but no longer works.

Furthermore, the 'E=0' flag is removed from ATF additional build
variable. It was added by commit
deb8d71c92 to avoid TFA build
failure because of '-Werror' flag. However, from version v2.6 or later,
it is not required anymore, the compiler warning was fixed.

The ATF patch
"board/arrow/avenger96/patches/arm-trusted-firmware/
0001-stm32mp157a-avenger96.dts-enable-hash-device-to-unbr.patch" also
has been removed. As it was not required due to using the new dhcore DTS
file for the ATF build.

Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be>
[Arnout: switch to
BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_8_VERSION instead of custom
lts-v2.8.16]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
2024-03-24 17:18:35 +01:00
..
overlay/boot/extlinux configs/avenger96_defconfig: bump Linux version to 6.6.22 LTS 2024-03-24 17:06:47 +01:00
readme.txt

readme.txt 

Arrow Avenger96

Intro
=====

This configuration supports the Arrow Avenger96 board:

https://wiki.dh-electronics.com/index.php/Avenger96

How to build
============

 $ make avenger96_defconfig
 $ make

How to write the microSD card
=============================

WARNING! This will destroy all the card content. Use with care!

Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.

Copy the bootable "sdcard.img" onto an microSD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

Boot the board
==============

 (1) Configure the boot switches for boot from microsd: 1-0-1

 (2) Insert the microSD card in the slot

 (3) Plug a serial adapter (beware: 1v8 levels!) to the low speed
     expansion connector

 (4) Plug in power cable

 (5) The system will start, with the console on UART, but also visible
     on the screen.