kumquat-buildroot/board/technologic/ts7680/readme.txt
Kris Bahnsen 0b058e15f5 fix links to Technologic Systems web resources
Technologic Systems has rebranded as embeddedTS with the current
domain eventually going offline. Update web/doc URLs to correct
resource locations.

Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2022-03-09 21:47:48 +01:00

51 lines
1.8 KiB
Plaintext

Technologic Systems TS-7680 SBC
===============================
This document explains how to set up a basic Buildroot system for
the Technologic Systems TS-7680 Single Board Computer.
The TS-7680 SBC is based on the Freescale i.MX286 ARM ARM926EJ-S
running at 454MHz. The TS-7680 features are 10/100 Ethernet ports,
Wi-Fi, microSD card, eMMC, NOR Flash, USB host port, CAN ports,
relays and ADC/DAC. More details on the board here:
https://docs.embeddedTS.com/TS-7680
The TS-7680 uses a 4.9 Linux kernel provided by Technologic Systems.
To build the default configuration you only have to run:
$ make ts7680_defconfig
$ make
The output looks like:
output/images
├── imx28-ts7680.dtb
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rootfs.tar
├── sdcard.img
└── uImage
The provided genimage configuration generates an image file containing
two partitions. The first one is unused, but mandatory as the
TS-7680 built-in bootloader loads the Linux uImage from the /boot
directory in the second partition. The second partition contains the
rootfs with the Linux uImage into the /boot directory.
$ fdisk output/images/sdcard.img
output/images/sdcard.img1 1 1 1 512B 0 Empty
output/images/sdcard.img2 2 524289 524288 256M 83 Linux
This image can be directly written to an SD card.
$ sudo dd if=output/images/sdcard.img of=/dev/mmcblk0
To boot with Buildroot, insert this SD card on the board, make sure
the SD jumper is present and the U-Boot jumper is not.
The bootloader comes pre-flashed on the board on an SPI flash. Since
updating the bootloader is risky and not trivial, it is not included
in the Buildroot defconfig. Refer to
https://docs.embeddedts.com/TS-7680#U-Boot for details on
which U-Boot config to use and how to flash it.