fb61cf213c
This initial support includes: u-boot v2019.04 Linux v5.0 Buildroot default packages Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com> [Thomas: use BR2_TARGET_UBOOT_BOOT_SCRIPT to generate the U-Boot script, instead of doing it in the post-build] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
51 lines
1.1 KiB
Plaintext
51 lines
1.1 KiB
Plaintext
A33-OLinuXino
|
|
|
|
Intro
|
|
=====
|
|
|
|
This board is based on Allwinner A33 SoC.
|
|
|
|
Home Page: https://www.olimex.com/Products/OLinuXino/A33/A33-OLinuXino/open-source-hardware
|
|
Wiki: https://wiki.amarulasolutions.com/bsp/sunxi/a33/Olimex-A33-Olinuxino.html
|
|
|
|
How to build it
|
|
===============
|
|
|
|
Configure Buildroot:
|
|
|
|
$ make olimex_a33_olinuxino_defconfig
|
|
|
|
Build everything by running:
|
|
|
|
$ make
|
|
|
|
Result of the build
|
|
-------------------
|
|
|
|
After building, you should get a tree like this:
|
|
|
|
output/images/
|
|
├── boot.scr
|
|
├── rootfs.ext2
|
|
├── rootfs.ext4 -> rootfs.ext2
|
|
├── rootfs.tar
|
|
├── sdcard.img
|
|
├── sun8i-a33-olinuxino.dtb
|
|
├── u-boot.bin
|
|
├── u-boot-sunxi-with-spl.bin
|
|
└── zImage
|
|
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
The sdcard.img file is a complete bootable image ready to be written
|
|
on the boot medium. To install it, simply copy the image to a uSD
|
|
card:
|
|
|
|
# dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
|
Where 'sdX' is the device node of the uSD.
|
|
|
|
Eject the SD card, insert it in the A33-OLinuXino board, and power it up.
|