a1a152684e
Add a defconfig for the Olimex A10-OLinuXino-LIME, reusing most of the A20-OLinuXino-Lime and A13-OLinuXino files (sym links). The configurations for Olimex A10-OLinuXino-LIME feature: - U-Boot 2018.03 - Mainline Linux kernel 4.14.26 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> [Arnout: remove commented-out BR2_ARM_EABIHF=y (which is default)] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
58 lines
1.3 KiB
Plaintext
58 lines
1.3 KiB
Plaintext
A10-OLinuXino-LIME
|
|
|
|
Intro
|
|
=====
|
|
|
|
These are open hardware boards, all based on the Allwinner A10 SoC.
|
|
|
|
for more details about the boards see the following pages:
|
|
- https://www.olimex.com/Products/OLinuXino/open-source-hardware
|
|
- https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME/
|
|
|
|
The following defconfigs are available:
|
|
- olimex_a10_olinuxino_lime_defconfig
|
|
for the A10-OLinuXino-LIME board using mainline kernel
|
|
|
|
(see http://linux-sunxi.org/Linux_Kernel for more details)
|
|
|
|
How to build it
|
|
===============
|
|
|
|
Configure Buildroot:
|
|
|
|
$ make <board>_defconfig
|
|
|
|
Compile everything and build the rootfs image:
|
|
|
|
$ make
|
|
|
|
Result of the build
|
|
-------------------
|
|
|
|
After building, you should get a tree like this:
|
|
|
|
output/images/
|
|
+-- boot.scr
|
|
+-- rootfs.ext2
|
|
+-- rootfs.ext4 -> rootfs.ext2
|
|
+-- sdcard.img
|
|
+-- sun4i-a10-olinuxino-lime.dtb (lime, mainline)
|
|
+-- u-boot.bin
|
|
+-- u-boot-sunxi-with-spl.bin
|
|
`-- zImage
|
|
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
The sdcard.img file is a complete bootable image ready to be written
|
|
on the boot medium. To install it, simply copy the image to a uSD
|
|
card:
|
|
|
|
# dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
|
Where 'sdX' is the device node of the uSD.
|
|
|
|
Eject the SD card, insert it in the A10-OLinuXino board, and power it up.
|
|
|