87280a43a9
Add support for the icicle kit, the main development board for Microchip's PolarFire SoC. The configuration file is microchip_mpfs_icicle_defconfig. It builds a bootable kernel image with an embedded root file system. The image built can be flashed to the board using the eMMC or an SD card. The yaml configuration file is used by the hss payload generator. It maps the ELF binaries or binary blobs to the individual application harts (U54s). The image generator script sets the partitions of the image. The kernel fragment file sets additional configurations for the icicle kit in buildroot that are not in the default configuration. The image tree souce file creates a FIT image. The post image script creates the payload using the payload generator host package and finally, creates the FIT image using the ITS after the kernel build. The U-Boot script and additional U-Boot configurations ensure that U-Boot behaves as expected for the icicle kit and boots the FIT image. The readme.txt file documents how to build and boot the icicle kit with this configuration. Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com> Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
17 lines
505 B
Plaintext
17 lines
505 B
Plaintext
# this assumes ${scriptaddr} is already set!!
|
|
|
|
# Try to boot a fitImage from eMMC/SD
|
|
|
|
setenv fdt_high 0xffffffffffffffff
|
|
setenv initrd_high 0xffffffffffffffff
|
|
|
|
load mmc 0:${distro_bootpart} ${scriptaddr} mpfs_icicle.itb;
|
|
bootm start ${scriptaddr}#kernel_dtb;
|
|
bootm loados ${scriptaddr};
|
|
# Try to load a ramdisk if available inside fitImage
|
|
bootm ramdisk;
|
|
bootm prep;
|
|
fdt set /soc/ethernet@20112000 mac-address ${icicle_mac_addr0};
|
|
fdt set /soc/ethernet@20110000 mac-address ${icicle_mac_addr1};
|
|
bootm go;
|