|
…
|
||
|---|---|---|
| .. | ||
| rootfs_overlay | ||
| genimage.cfg | ||
| readme.txt | ||
MangoPi MQ1RDW2 =============== MangoPi MQ1RDW2 is a tiny ARM Cortex-A7 based single board computer. It's built around Allwinner T113-S3 dual core 1GHz CPU with integrated 128MB DDR3-1600 RAM. Board features: - USB-OTG Type-C socket - USB-HOST Type-C socket - 2x 18 pin GPIO headers - TF card slot - RTL8723DS WiFi module with ext. antenna connector - 40 pin RGB FPC connector - 6 pin CTP FPC connector - 24 pin DVP FPC connector - onboard mic - onboard audio amplifier - FEL,reset button How to build ============ $ make mangopi_mq1rdw2_defconfig $ make Wifi ========== Edit board/mangopi/mq1rdw2/overlay/etc/wpa_supplicant.conf or /etc/wpa_supplicant.conf once connected to the board: * Replace YOURSSID with your AP ssid * Replace YOURPASSWD with your AP password How to write the SD card ======================== Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Copy the bootable "sdcard.img" onto an SD card with "dd": $ sudo dd if=output/images/sdcard.img of=/dev/sdX Connect a TTL UART to the UART3 on P8 header (unpopulated), insert the microSD card and plug in a USB-C cable to the OTG or HOST connector to boot the system.