c9abeddce6
Board support package includes: * Buildroot defconfig * Mainline Linux kernel v4.9.6 * Mainline U-Boot (current HEAD revision is used, as board support patches are not in stable release yet) * genimage config to create sdcard image * Board readme.txt [Peter: use http:// instead of git:// for u-boot] Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
47 lines
1006 B
Plaintext
47 lines
1006 B
Plaintext
**********
|
|
chiliBoard
|
|
**********
|
|
|
|
Build
|
|
=====
|
|
|
|
First, configure Buildroot for your chiliBoard:
|
|
|
|
make grinn_chiliboard_defconfig
|
|
|
|
Build image:
|
|
|
|
make
|
|
|
|
After building you should get a tree like this:
|
|
|
|
output/images/
|
|
├── am335x-chiliboard.dtb
|
|
├── boot.vfat
|
|
├── MLO
|
|
├── rootfs.ext2
|
|
├── rootfs.ext4
|
|
├── rootfs.tar
|
|
├── sdcard.img
|
|
├── u-boot.img
|
|
└── zImage
|
|
|
|
Create a bootable microSD card
|
|
==============================
|
|
|
|
Buildroot prepares a bootable microSD card image "sdcard.img" in output/images/
|
|
directory, To flash SD card just run the following command:
|
|
|
|
sudo dd if=output/images/sdcard.img of=/dev/<sd_card> bs=1M
|
|
|
|
where <sd_card> can be sdX or mmcblkX
|
|
|
|
*** WARNING! This will destroy all contents of device you specify! ***
|
|
|
|
Boot chiliBoard
|
|
===============
|
|
|
|
- insert the microSD card in the microSD slot of the board;
|
|
- plug micro USB cable to provide power and console interface
|
|
- use terminal emulator with 115200 bps, 8n1
|