03b228fd1a
Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
70 lines
1.6 KiB
Plaintext
70 lines
1.6 KiB
Plaintext
******************************
|
|
Freescale i.MX8DXL WEVK board
|
|
******************************
|
|
|
|
This file documents the Buildroot support for the Freescale i.MX8DXL WEVK
|
|
board.
|
|
|
|
Build
|
|
=====
|
|
|
|
First, configure Buildroot for the i.MX8DXL WEVK board:
|
|
|
|
make freescale_imx8dxlevk_defconfig
|
|
|
|
Build all components:
|
|
|
|
make
|
|
|
|
You will find in output/images/ the following files:
|
|
- ahab-container.img
|
|
- bl31.bin
|
|
- boot.vfat
|
|
- Image
|
|
- imx8-boot-sd.bin
|
|
- imx8dxl-evk.dtb
|
|
- mkimg.commit
|
|
- mx8dxl-ddr3-evk-scfw-tcm.bin
|
|
- mx8dxl-evk-scfw-tcm.bin
|
|
- mx8dxl-phantom-mek-scfw-tcm.bin
|
|
- mx8dxl-val-scfw-tcm.bin
|
|
- rootfs.ext2
|
|
- rootfs.ext4
|
|
- rootfs.tar
|
|
- sdcard.img
|
|
- u-boot-atf.bin
|
|
- u-boot.bin
|
|
- u-boot-hash.bin
|
|
|
|
Create a bootable SD card
|
|
=========================
|
|
|
|
To determine the device associated to the SD card have a look in the
|
|
/proc/partitions file:
|
|
|
|
cat /proc/partitions
|
|
|
|
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
|
directory, ready to be dumped on a SD card. Launch the following
|
|
command as root:
|
|
|
|
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
|
|
|
|
*** WARNING! This will destroy all the card content. Use with care! ***
|
|
|
|
For details about the medium image layout, see the definition in
|
|
board/freescale/common/imx/genimage.cfg.template_imx8.
|
|
|
|
Boot the i.MX8DXL WEVK board
|
|
============================
|
|
|
|
To boot your newly created system:
|
|
- insert the SD card in the SD slot of the board;
|
|
- Configure the boot switch as follows:
|
|
SW1: ON ON OFF OFF
|
|
- put a micro USB cable into the Debug USB Port and connect using a terminal
|
|
emulator at 115200 bps, 8n1;
|
|
- power on the board.
|
|
|
|
Enjoy!
|