config BR2_PACKAGE_OPENOCD bool "openocd" select BR2_PACKAGE_JIMTCL help OpenOCD - Open On-Chip Debugger http://openocd.sourceforge.net/ if BR2_PACKAGE_OPENOCD comment "Adapters" config BR2_PACKAGE_OPENOCD_CMSIS_DAP bool "CMSIS-DAP compliant debuggers" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_PACKAGE_HAS_UDEV # hidapi depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # hidapi select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_HIDAPI help Enable support for CMSIS-DAP compliant debuggers (i.e Atmel/Microchip EDBG, etc.) config BR2_PACKAGE_OPENOCD_FTDI bool "MPSSE mode of FTDI based devices" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the MPSSE mode of FTDI (FT2xxx/FT4xxx) based devices (default is auto) config BR2_PACKAGE_OPENOCD_STLINK bool "ST-Link JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the ST-Link JTAG Programmer (default is auto) config BR2_PACKAGE_OPENOCD_TI_ICDI bool "TI ICDI JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the TI ICDI JTAG Programmer (default is auto) config BR2_PACKAGE_OPENOCD_ULINK bool "Keil ULINK JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the Keil ULINK JTAG Programmer (default is auto) config BR2_PACKAGE_OPENOCD_UBLASTER2 bool "Altera USB-Blaster II Compatible" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the Altera USB-Blaster II Compatible (default is auto) config BR2_PACKAGE_OPENOCD_JLINK bool "Segger J-Link JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Segger J-Link JTAG Programmer and clone such as Atmel SAM-ICE config BR2_PACKAGE_OPENOCD_OSDBM bool "OSDBM JTAG (only) Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the OSBDM (JTAG only) Programmer (default is auto) config BR2_PACKAGE_OPENOCD_OPENDOUS bool "eStick/opendous JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the eStick/opendous JTAG Programmer (default is auto) config BR2_PACKAGE_OPENOCD_AICE bool "Andes JTAG Programmer" depends on BR2_USE_MMU # use fork() depends on BR2_TOOLCHAIN_HAS_THREADS # libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the Andes JTAG Programmer (default is auto) config BR2_PACKAGE_OPENOCD_VSLLINK bool "Versaloon-Link JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help Enable building support for the Versaloon-Link JTAG Programmer (default is auto) config BR2_PACKAGE_OPENOCD_USBPROG bool "USBProg JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help Enable building support for the USBProg JTAG Programmer (default is auto) config BR2_PACKAGE_OPENOCD_RLINK bool "Raisonance RLink JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help Enable building support for the Raisonance RLink JTAG Programmer (default is auto) config BR2_PACKAGE_OPENOCD_ARMEW bool "Olimex ARM-JTAG-EW Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help Enable building support for the Olimex ARM-JTAG-EW Programmer (default is auto) config BR2_PACKAGE_OPENOCD_PARPORT bool "pc parallel port driver" help Enable building the pc parallel port driver config BR2_PACKAGE_OPENOCD_VPI bool "JTAG VPI" help Enable building support for JTAG VPI config BR2_PACKAGE_OPENOCD_UBLASTER bool "Altera USB-Blaster" depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb select BR2_PACKAGE_LIBFTDI1 help Enable building support for the Altera USB-Blaster using the libftdi driver, opensource alternate of FTD2XX config BR2_PACKAGE_OPENOCD_AMTJT bool "Amontec JTAG-Accelerator" help Enable building the Amontec JTAG-Accelerator driver if BR2_arm config BR2_PACKAGE_OPENOCD_EP93XX bool "EP93xx based SBCs" help Enable building support for EP93xx based SBCs config BR2_PACKAGE_OPENOCD_AT91RM bool "AT91RM9200 based SBCs" help Enable building support for AT91RM9200 based SBCs config BR2_PACKAGE_OPENOCD_BCM2835 bool "bitbanging on BCM2835" help Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi) endif # BR2_arm config BR2_PACKAGE_OPENOCD_GW16012 bool "Gateworks GW16012 JTAG Programmer" help Enable building support for the Gateworks GW16012 JTAG Programmer config BR2_PACKAGE_OPENOCD_PRESTO bool "ASIX Presto Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb select BR2_PACKAGE_LIBFTDI1 help Enable building support for ASIX Presto Programmer using the libftdi driver config BR2_PACKAGE_OPENOCD_OPENJTAG bool "OpenJTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb select BR2_PACKAGE_LIBFTDI1 select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT # needs usb.h help Enable building support for the OpenJTAG Programmer with ftdi driver config BR2_PACKAGE_OPENOCD_BUSPIRATE bool "Buspirate" help Enable building support for the Buspirate config BR2_PACKAGE_OPENOCD_SYSFS bool "programming via sysfs gpios" help Enable building support for programming driven via sysfs gpios. # Many adapters need libusb or libusb-compat, which require threads and # gcc >= 4.9 but we don't want to duplicate this comment for all # adapters that select libusb or libusb-compat. comment "many openocd adapters needs a toolchain w/ threads, gcc >= 4.9" depends on !BR2_TOOLCHAIN_HAS_THREADS || \ !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 endif # BR2_PACKAGE_OPENOCD