################################################################################ # # toolchain-external # ################################################################################ # # This package implements the support for external toolchains, i.e # toolchains that are available pre-built, ready to use. Such toolchain # may either be readily available on the Web (Linaro, Sourcery # CodeBench, from processor vendors) or may be built with tools like # Crosstool-NG or Buildroot itself. So far, we have tested this # with: # # * Toolchains generated by Crosstool-NG # * Toolchains generated by Buildroot # * Toolchains provided by Linaro for the ARM and AArch64 # architectures # * Sourcery CodeBench toolchains (from Mentor Graphics) for the ARM, # MIPS, PowerPC, x86, x86_64 and NIOS 2 architectures. For the MIPS # toolchain, the -muclibc variant isn't supported yet, only the # default glibc-based variant is. # * Analog Devices toolchains for the Blackfin architecture # * Xilinx toolchains for the Microblaze architecture # * Synopsys DesignWare toolchains for ARC cores # # The basic principle is the following # # 1. If the toolchain is not pre-installed, download and extract it # in $(TOOLCHAIN_EXTERNAL_INSTALL_DIR). Otherwise, # $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) points to were the toolchain has # already been installed by the user. # # 2. For all external toolchains, perform some checks on the # conformity between the toolchain configuration described in the # Buildroot menuconfig system, and the real configuration of the # external toolchain. This is for example important to make sure that # the Buildroot configuration system knows whether the toolchain # supports RPC, IPv6, locales, large files, etc. Unfortunately, these # things cannot be detected automatically, since the value of these # options (such as BR2_TOOLCHAIN_HAS_NATIVE_RPC) are needed at # configuration time because these options are used as dependencies # for other options. And at configuration time, we are not able to # retrieve the external toolchain configuration. # # 3. Copy the libraries needed at runtime to the target directory, # $(TARGET_DIR). Obviously, things such as the C library, the dynamic # loader and a few other utility libraries are needed if dynamic # applications are to be executed on the target system. # # 4. Copy the libraries and headers to the staging directory. This # will allow all further calls to gcc to be made using --sysroot # $(STAGING_DIR), which greatly simplifies the compilation of the # packages when using external toolchains. So in the end, only the # cross-compiler binaries remains external, all libraries and headers # are imported into the Buildroot tree. # # 5. Build a toolchain wrapper which executes the external toolchain # with a number of arguments (sysroot/march/mtune/..) hardcoded, # so we're sure the correct configuration is always used and the # toolchain behaves similar to an internal toolchain. # This toolchain wrapper and symlinks are installed into # $(HOST_DIR)/usr/bin like for the internal toolchains, and the rest # of Buildroot is handled identical for the 2 toolchain types. ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC),y) TOOLCHAIN_EXTERNAL_LIBS += libatomic.so.* libc.so.* libcrypt.so.* libdl.so.* libgcc_s.so.* libm.so.* libnsl.so.* libresolv.so.* librt.so.* libutil.so.* ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_ARM_EABIHF),yy) TOOLCHAIN_EXTERNAL_LIBS += ld-linux-armhf.so.* else TOOLCHAIN_EXTERNAL_LIBS += ld*.so.* endif ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y) TOOLCHAIN_EXTERNAL_LIBS += libpthread.so.* ifneq ($(BR2_PACKAGE_GDB)$(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY),) TOOLCHAIN_EXTERNAL_LIBS += libthread_db.so.* endif # gdbserver endif # ! no threads endif ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC),y) TOOLCHAIN_EXTERNAL_LIBS += libnss_files.so.* libnss_dns.so.* endif ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y) TOOLCHAIN_EXTERNAL_LIBS += libc.so libgcc_s.so.* endif ifeq ($(BR2_INSTALL_LIBSTDCPP),y) TOOLCHAIN_EXTERNAL_LIBS += libstdc++.so.* endif ifeq ($(BR2_TOOLCHAIN_HAS_FORTRAN),y) TOOLCHAIN_EXTERNAL_LIBS += libgfortran.so.* # fortran needs quadmath on x86 and x86_64 ifeq ($(BR2_TOOLCHAIN_HAS_LIBQUADMATH),y) TOOLCHAIN_EXTERNAL_LIBS += libquadmath.so* endif endif TOOLCHAIN_EXTERNAL_LIBS += $(call qstrip,$(BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS)) # Details about sysroot directory selection. # # To find the sysroot directory, we use the trick of looking for the # 'libc.a' file with the -print-file-name gcc option, and then # mangling the path to find the base directory of the sysroot. # # Note that we do not use the -print-sysroot option, because it is # only available since gcc 4.4.x, and we only recently dropped support # for 4.2.x and 4.3.x. # # When doing this, we don't pass any option to gcc that could select a # multilib variant (such as -march) as we want the "main" sysroot, # which contains all variants of the C library in the case of multilib # toolchains. We use the TARGET_CC_NO_SYSROOT variable, which is the # path of the cross-compiler, without the --sysroot=$(STAGING_DIR), # since what we want to find is the location of the original toolchain # sysroot. This "main" sysroot directory is stored in SYSROOT_DIR. # # Then, multilib toolchains are a little bit more complicated, since # they in fact have multiple sysroots, one for each variant supported # by the toolchain. So we need to find the particular sysroot we're # interested in. # # To do so, we ask the compiler where its sysroot is by passing all # flags (including -march and al.), except the --sysroot flag since we # want to the compiler to tell us where its original sysroot # is. ARCH_SUBDIR will contain the subdirectory, in the main # SYSROOT_DIR, that corresponds to the selected architecture # variant. ARCH_SYSROOT_DIR will contain the full path to this # location. # # One might wonder why we don't just bother with ARCH_SYSROOT_DIR. The # fact is that in multilib toolchains, the header files are often only # present in the main sysroot, and only the libraries are available in # each variant-specific sysroot directory. TOOLCHAIN_EXTERNAL_PREFIX = $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PREFIX)) TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR = $(HOST_DIR)/opt/ext-toolchain ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y) TOOLCHAIN_EXTERNAL_INSTALL_DIR = $(TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR) else TOOLCHAIN_EXTERNAL_INSTALL_DIR = $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PATH)) endif ifeq ($(TOOLCHAIN_EXTERNAL_INSTALL_DIR),) ifneq ($(TOOLCHAIN_EXTERNAL_PREFIX),) # if no path set, figure it out from path TOOLCHAIN_EXTERNAL_BIN := $(shell dirname $(shell which $(TOOLCHAIN_EXTERNAL_PREFIX)-gcc)) endif else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX),y) TOOLCHAIN_EXTERNAL_BIN := $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/$(TOOLCHAIN_EXTERNAL_PREFIX)/bin else TOOLCHAIN_EXTERNAL_BIN := $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/bin endif endif # If this is a buildroot toolchain, it already has a wrapper which we want to # bypass. Since this is only evaluated after it has been extracted, we can use # $(wildcard ...) here. TOOLCHAIN_EXTERNAL_SUFFIX = \ $(if $(wildcard $(TOOLCHAIN_EXTERNAL_BIN)/*.br_real),.br_real) TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \ -DBR_CROSS_PATH_SUFFIX='"$(TOOLCHAIN_EXTERNAL_SUFFIX)"' TOOLCHAIN_EXTERNAL_CROSS = $(TOOLCHAIN_EXTERNAL_BIN)/$(TOOLCHAIN_EXTERNAL_PREFIX)- TOOLCHAIN_EXTERNAL_CC = $(TOOLCHAIN_EXTERNAL_CROSS)gcc$(TOOLCHAIN_EXTERNAL_SUFFIX) TOOLCHAIN_EXTERNAL_CXX = $(TOOLCHAIN_EXTERNAL_CROSS)g++$(TOOLCHAIN_EXTERNAL_SUFFIX) TOOLCHAIN_EXTERNAL_FC = $(TOOLCHAIN_EXTERNAL_CROSS)gfortran$(TOOLCHAIN_EXTERNAL_SUFFIX) TOOLCHAIN_EXTERNAL_READELF = $(TOOLCHAIN_EXTERNAL_CROSS)readelf$(TOOLCHAIN_EXTERNAL_SUFFIX) ifeq ($(filter $(HOST_DIR)/%,$(TOOLCHAIN_EXTERNAL_BIN)),) # TOOLCHAIN_EXTERNAL_BIN points outside HOST_DIR => absolute path TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \ -DBR_CROSS_PATH_ABS='"$(TOOLCHAIN_EXTERNAL_BIN)"' else # TOOLCHAIN_EXTERNAL_BIN points inside HOST_DIR => relative path TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \ -DBR_CROSS_PATH_REL='"$(TOOLCHAIN_EXTERNAL_BIN:$(HOST_DIR)/%=%)"' endif ifeq ($(call qstrip,$(BR2_GCC_TARGET_CPU_REVISION)),) CC_TARGET_CPU_ := $(call qstrip,$(BR2_GCC_TARGET_CPU)) else CC_TARGET_CPU_ := $(call qstrip,$(BR2_GCC_TARGET_CPU)-$(BR2_GCC_TARGET_CPU_REVISION)) endif CC_TARGET_ARCH_ := $(call qstrip,$(BR2_GCC_TARGET_ARCH)) CC_TARGET_ABI_ := $(call qstrip,$(BR2_GCC_TARGET_ABI)) CC_TARGET_FPU_ := $(call qstrip,$(BR2_GCC_TARGET_FPU)) CC_TARGET_FLOAT_ABI_ := $(call qstrip,$(BR2_GCC_TARGET_FLOAT_ABI)) CC_TARGET_MODE_ := $(call qstrip,$(BR2_GCC_TARGET_MODE)) # march/mtune/floating point mode needs to be passed to the external toolchain # to select the right multilib variant ifeq ($(BR2_x86_64),y) TOOLCHAIN_EXTERNAL_CFLAGS += -m64 TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_64 endif ifneq ($(CC_TARGET_ARCH_),) TOOLCHAIN_EXTERNAL_CFLAGS += -march=$(CC_TARGET_ARCH_) TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ARCH='"$(CC_TARGET_ARCH_)"' endif ifneq ($(CC_TARGET_CPU_),) TOOLCHAIN_EXTERNAL_CFLAGS += -mcpu=$(CC_TARGET_CPU_) TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_CPU='"$(CC_TARGET_CPU_)"' endif ifneq ($(CC_TARGET_ABI_),) TOOLCHAIN_EXTERNAL_CFLAGS += -mabi=$(CC_TARGET_ABI_) TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ABI='"$(CC_TARGET_ABI_)"' endif ifneq ($(CC_TARGET_FPU_),) TOOLCHAIN_EXTERNAL_CFLAGS += -mfpu=$(CC_TARGET_FPU_) TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_FPU='"$(CC_TARGET_FPU_)"' endif ifneq ($(CC_TARGET_FLOAT_ABI_),) TOOLCHAIN_EXTERNAL_CFLAGS += -mfloat-abi=$(CC_TARGET_FLOAT_ABI_) TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_FLOAT_ABI='"$(CC_TARGET_FLOAT_ABI_)"' endif ifneq ($(CC_TARGET_MODE_),) TOOLCHAIN_EXTERNAL_CFLAGS += -m$(CC_TARGET_MODE_) TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MODE='"$(CC_TARGET_MODE_)"' endif ifeq ($(BR2_BINFMT_FLAT),y) TOOLCHAIN_EXTERNAL_CFLAGS += -Wl,-elf2flt TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_BINFMT_FLAT endif ifeq ($(BR2_mipsel)$(BR2_mips64el),y) TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MIPS_TARGET_LITTLE_ENDIAN TOOLCHAIN_EXTERNAL_CFLAGS += -EL endif ifeq ($(BR2_mips)$(BR2_mips64),y) TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MIPS_TARGET_BIG_ENDIAN TOOLCHAIN_EXTERNAL_CFLAGS += -EB endif ifeq ($(BR2_arceb),y) TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ARC_TARGET_BIG_ENDIAN TOOLCHAIN_EXTERNAL_CFLAGS += -EB endif TOOLCHAIN_EXTERNAL_CFLAGS += $(call qstrip,$(BR2_TARGET_OPTIMIZATION)) ifeq ($(BR2_SOFT_FLOAT),y) TOOLCHAIN_EXTERNAL_CFLAGS += -msoft-float TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_SOFTFLOAT=1 endif # musl does not provide an implementation for sys/queue.h or sys/cdefs.h. # So, add the musl-compat-headers package that will install those files, # into the staging directory: # sys/queue.h: header from NetBSD # sys/cdefs.h: minimalist header bundled in Buildroot ifeq ($(BR2_TOOLCHAIN_USES_MUSL),y) TOOLCHAIN_EXTERNAL_DEPENDENCIES += musl-compat-headers endif # The Codescape toolchain uses a sysroot layout that places them # side-by-side instead of nested like multilibs. A symlink is needed # much like for the nested sysroots which are handled in # copy_toolchain_sysroot but there is not enough information in there # to determine whether the sysroot layout was nested or side-by-side. # Add the symlink here for now. define TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_SYMLINK $(Q)ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))"; \ ARCH_SUBDIR=`basename $${ARCH_SYSROOT_DIR}`; \ ln -snf . $(STAGING_DIR)/$${ARCH_SUBDIR} endef # Special fixup for Codescape MIPS toolchains, that have bin- and # sbin- directories. We create symlinks bin -> bin- and sbin # -> sbin- so that the rest of Buildroot can find the toolchain # tools in the appropriate location. ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_IMG_MIPS)$(BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_MTI_MIPS),y) ifeq ($(BR2_MIPS_OABI32),y) TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_BIN_DIR_SUFFIX = o32 else ifeq ($(BR2_MIPS_NABI32),y) TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_BIN_DIR_SUFFIX = n32 else ifeq ($(BR2_MIPS_NABI64),y) TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_BIN_DIR_SUFFIX = n64 endif define TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_STAGING_FIXUPS rmdir $(STAGING_DIR)/usr/bin $(STAGING_DIR)/usr/sbin ln -sf bin-$(TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_BIN_DIR_SUFFIX) $(STAGING_DIR)/usr/bin ln -sf sbin-$(TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_BIN_DIR_SUFFIX) $(STAGING_DIR)/usr/sbin endef endif # Special handling for Blackfin toolchain, because of the split in two # tarballs, and the organization of tarball contents. The tarballs # contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories, # which themselves contain the toolchain. This is why we strip more # components than usual. define TOOLCHAIN_EXTERNAL_BLACKFIN_UCLIBC_EXTRA_EXTRACT $(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS) | \ $(TAR) --strip-components=3 --hard-dereference -C $(@D) $(TAR_OPTIONS) - endef ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi TOOLCHAIN_EXTERNAL_SOURCE = arm-2014.05-29-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A),y) TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv7a-linux-gnueabi-sdk.tar.bz2 TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL = arago-toolchain-2011.09-sources.tar.bz2 define TOOLCHAIN_EXTERNAL_FIXUP_CMDS mv $(@D)/arago-2011.09/armv7a/* $(@D)/ rm -rf $(@D)/arago-2011.09/ endef TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += TOOLCHAIN_EXTERNAL_FIXUP_CMDS else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE),y) TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv5te-linux-gnueabi-sdk.tar.bz2 TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL = arago-toolchain-2011.09-sources.tar.bz2 define TOOLCHAIN_EXTERNAL_FIXUP_CMDS mv $(@D)/arago-2011.09/armv5te/* $(@D)/ rm -rf $(@D)/arago-2011.09/ endef TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += TOOLCHAIN_EXTERNAL_FIXUP_CMDS else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y) TOOLCHAIN_EXTERNAL_SITE = https://releases.linaro.org/components/toolchain/binaries/5.3-2016.05/arm-linux-gnueabihf ifeq ($(HOSTARCH),x86) TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.3.1-2016.05-i686_arm-linux-gnueabihf.tar.xz else TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.3.1-2016.05-x86_64_arm-linux-gnueabihf.tar.xz endif else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y) TOOLCHAIN_EXTERNAL_SITE = https://releases.linaro.org/components/toolchain/binaries/5.3-2016.05/armeb-linux-gnueabihf ifeq ($(HOSTARCH),x86) TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.3.1-2016.05-i686_armeb-linux-gnueabihf.tar.xz else TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.3.1-2016.05-x86_64_armeb-linux-gnueabihf.tar.xz endif else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu TOOLCHAIN_EXTERNAL_SOURCE = mips-2016.05-8-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2016.05-10-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH),y) TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu TOOLCHAIN_EXTERNAL_SOURCE = renesas-2012.09-61-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86),y) TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AMD64),y) TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/x86_64-amd-linux-gnu TOOLCHAIN_EXTERNAL_SOURCE = amd-2015.11-139-x86_64-amd-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_IMG_MIPS),y) TOOLCHAIN_EXTERNAL_SITE = http://codescape-mips-sdk.imgtec.com/components/toolchain/2016.05-03 TOOLCHAIN_EXTERNAL_SOURCE = Codescape.GNU.Tools.Package.2016.05-03.for.MIPS.IMG.Linux.CentOS-5.x86.tar.gz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_SYMLINK TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_STAGING_FIXUPS TOOLCHAIN_EXTERNAL_STRIP_COMPONENTS = 2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_MTI_MIPS),y) TOOLCHAIN_EXTERNAL_SITE = http://codescape-mips-sdk.imgtec.com/components/toolchain/2016.05-03 TOOLCHAIN_EXTERNAL_SOURCE = Codescape.GNU.Tools.Package.2016.05-03.for.MIPS.MTI.Linux.CentOS-5.x86.tar.gz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_SYMLINK TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_STAGING_FIXUPS TOOLCHAIN_EXTERNAL_STRIP_COMPONENTS = 2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX),y) TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1-RC2/i386 TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2 TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2 TOOLCHAIN_EXTERNAL_STRIP_COMPONENTS = 3 TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += TOOLCHAIN_EXTERNAL_BLACKFIN_UCLIBC_EXTRA_EXTRACT else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y) TOOLCHAIN_EXTERNAL_SITE = https://releases.linaro.org/components/toolchain/binaries/5.3-2016.05/aarch64-linux-gnu ifeq ($(HOSTARCH),x86) TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.3.1-2016.05-i686_aarch64-linux-gnu.tar.xz else TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.3.1-2016.05-x86_64_aarch64-linux-gnu.tar.xz endif else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/aarch64-amd-linux-gnu TOOLCHAIN_EXTERNAL_SOURCE = aarch64-amd-2014.11-95-aarch64-amd-linux-gnu-i686-pc-linux-gnu.tar.bz2 define TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64_STAGING_FIXUP ln -sf ld-2.20.so $(STAGING_DIR)/lib/ld-linux-aarch64.so.1 endef TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64_STAGING_FIXUP define TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64_TARGET_FIXUP ln -sf ld-2.20.so $(TARGET_DIR)/lib/ld-linux-aarch64.so.1 endef TOOLCHAIN_EXTERNAL_POST_INSTALL_TARGET_HOOKS += TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64_TARGET_FIXUP else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y) TOOLCHAIN_EXTERNAL_VERSION = 1.1.12 TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-$(TOOLCHAIN_EXTERNAL_VERSION) ifeq ($(BR2_arm)$(BR2_ARM_EABI),yy) TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_arm)$(BR2_ARM_EABIHF),yy) TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabihf-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_armeb),y) TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_i386),y) TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_mips),y) TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_mipsel):$(BR2_SOFT_FLOAT),y:) TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_mipsel):$(BR2_SOFT_FLOAT),y:y) TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_powerpc),y) TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_sh4),y) TOOLCHAIN_EXTERNAL_SOURCE = crossx86-sh4-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_sh4eb),y) TOOLCHAIN_EXTERNAL_SOURCE = crossx86-sh4eb-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_x86_64),y) TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz endif else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_SYNOPSYS_ARC),y) TOOLCHAIN_EXTERNAL_SITE = https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2014.12 ifeq ($(BR2_arc750d)$(BR2_arc770d),y) TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE = arc700 else TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE = archs endif ifeq ($(BR2_arcle),y) TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS = le else TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS = be endif TOOLCHAIN_EXTERNAL_SOURCE = arc_gnu_2014.12_prebuilt_uclibc_$(TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS)_$(TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE)_linux_install.tar.gz else # Custom toolchain TOOLCHAIN_EXTERNAL_SITE = $(patsubst %/,%,$(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL)))) TOOLCHAIN_EXTERNAL_SOURCE = $(notdir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))) # We can't check hashes for custom downloaded toolchains BR_NO_CHECK_HASH_FOR += $(TOOLCHAIN_EXTERNAL_SOURCE) endif # Some toolchain vendors have a regular file naming pattern. # For them, mass-define _ACTUAL_SOURCE_TARBALL based _SITE. ifneq ($(findstring sourcery.mentor.com/public/gnu_toolchain,$(TOOLCHAIN_EXTERNAL_SITE)),) TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL ?= \ $(subst -i686-pc-linux-gnu.tar.bz2,.src.tar.bz2,$(subst -i686-pc-linux-gnu-i386-linux.tar.bz2,-i686-pc-linux-gnu.src.tar.bz2,$(TOOLCHAIN_EXTERNAL_SOURCE))) endif # In fact, we don't need to download the toolchain, since it is already # available on the system, so force the site and source to be empty so # that nothing will be downloaded/extracted. ifeq ($(BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED),y) TOOLCHAIN_EXTERNAL_SITE = TOOLCHAIN_EXTERNAL_SOURCE = endif TOOLCHAIN_EXTERNAL_ADD_TOOLCHAIN_DEPENDENCY = NO TOOLCHAIN_EXTERNAL_INSTALL_STAGING = YES # Normal handling of downloaded toolchain tarball extraction. ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y) TOOLCHAIN_EXTERNAL_EXCLUDES = usr/lib/locale/* # As a regular package, the toolchain gets extracted in $(@D), but # since it's actually a fairly special package, we need it to be moved # into TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR. define TOOLCHAIN_EXTERNAL_MOVE rm -rf $(TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR) mkdir -p $(TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR) mv $(@D)/* $(TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR)/ endef TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += \ TOOLCHAIN_EXTERNAL_MOVE endif # Returns the location of the libc.a file for the given compiler + flags define toolchain_find_libc_a $$(readlink -f $$(LANG=C $(1) -print-file-name=libc.a)) endef # Returns the sysroot location for the given compiler + flags. We need # to handle cases where libc.a is in: # # - lib/ # - usr/lib/ # - lib32/ # - lib64/ # - lib32-fp/ (Cavium toolchain) # - lib64-fp/ (Cavium toolchain) # - usr/lib// (Linaro toolchain) # # And variations on these. define toolchain_find_sysroot $$(printf $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:(usr/)?lib(32|64)?([^/]*)?/([^/]*/)?libc\.a::') endef # Returns the lib subdirectory for the given compiler + flags (i.e # typically lib32 or lib64 for some toolchains) define toolchain_find_libdir $$(printf $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:.*/(usr/)?(lib(32|64)?([^/]*)?)/([^/]*/)?libc.a:\2:') endef # Checks for an already installed toolchain: check the toolchain # location, check that it is usable, and then verify that it # matches the configuration provided in Buildroot: ABI, C++ support, # kernel headers version, type of C library and all C library features. define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS $(Q)$(call check_cross_compiler_exists,$(TOOLCHAIN_EXTERNAL_CC)) $(Q)$(call check_unusable_toolchain,$(TOOLCHAIN_EXTERNAL_CC)) $(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \ $(call check_kernel_headers_version,\ $(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC)),\ $(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \ $(call check_gcc_version,$(TOOLCHAIN_EXTERNAL_CC),\ $(call qstrip,$(BR2_TOOLCHAIN_GCC_AT_LEAST))); \ if test "$(BR2_arm)" = "y" ; then \ $(call check_arm_abi,\ "$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)",\ $(TOOLCHAIN_EXTERNAL_READELF)) ; \ fi ; \ if test "$(BR2_INSTALL_LIBSTDCPP)" = "y" ; then \ $(call check_cplusplus,$(TOOLCHAIN_EXTERNAL_CXX)) ; \ fi ; \ if test "$(BR2_TOOLCHAIN_HAS_FORTRAN)" = "y" ; then \ $(call check_fortran,$(TOOLCHAIN_EXTERNAL_FC)) ; \ fi ; \ if test "$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC)" = "y" ; then \ $(call check_uclibc,$${SYSROOT_DIR}) ; \ elif test "$(BR2_TOOLCHAIN_EXTERNAL_MUSL)" = "y" ; then \ $(call check_musl,$${SYSROOT_DIR}) ; \ else \ $(call check_glibc,$${SYSROOT_DIR}) ; \ fi $(Q)$(call check_toolchain_ssp,$(TOOLCHAIN_EXTERNAL_CC)) endef # With the musl C library, the libc.so library directly plays the role # of the dynamic library loader. We just need to create a symbolic # link to libc.so with the appropriate name. ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y) ifeq ($(BR2_i386),y) MUSL_ARCH = i386 else ifeq ($(BR2_ARM_EABIHF),y) MUSL_ARCH = armhf else ifeq ($(BR2_mipsel):$(BR2_SOFT_FLOAT),y:y) MUSL_ARCH = mipsel-sf else ifeq ($(BR2_sh),y) MUSL_ARCH = sh else MUSL_ARCH = $(ARCH) endif define TOOLCHAIN_EXTERNAL_MUSL_LD_LINK ln -sf libc.so $(TARGET_DIR)/lib/ld-musl-$(MUSL_ARCH).so.1 endef TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_MUSL_LD_LINK endif # Create a symlink from (usr/)$(ARCH_LIB_DIR) to lib. # Note: the skeleton package additionally creates lib32->lib or lib64->lib # (as appropriate) # # $1: destination directory (TARGET_DIR / STAGING_DIR) create_lib_symlinks = \ $(Q)DESTDIR="$(strip $1)" ; \ ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ if [ ! -e "$${DESTDIR}/$${ARCH_LIB_DIR}" -a ! -e "$${DESTDIR}/usr/$${ARCH_LIB_DIR}" ]; then \ ln -snf lib "$${DESTDIR}/$${ARCH_LIB_DIR}" ; \ ln -snf lib "$${DESTDIR}/usr/$${ARCH_LIB_DIR}" ; \ fi define TOOLCHAIN_EXTERNAL_CREATE_STAGING_LIB_SYMLINK $(call create_lib_symlinks,$(STAGING_DIR)) endef define TOOLCHAIN_EXTERNAL_CREATE_TARGET_LIB_SYMLINK $(call create_lib_symlinks,$(TARGET_DIR)) endef # Integration of the toolchain into Buildroot: find the main sysroot # and the variant-specific sysroot, then copy the needed libraries to # the $(TARGET_DIR) and copy the whole sysroot (libraries and headers) # to $(STAGING_DIR). # # Variables are defined as follows: # # LIBC_A_LOCATION: location of the libc.a file in the default # multilib variant (allows to find the main # sysroot directory) # Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/usr/lib/libc.a # # SYSROOT_DIR: the main sysroot directory, deduced from # LIBC_A_LOCATION by removing the # usr/lib[32|64]/libc.a part of the path. # Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/ # # ARCH_LIBC_A_LOCATION: location of the libc.a file in the selected # multilib variant (taking into account the # CFLAGS). Allows to find the sysroot of the # selected multilib variant. # Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/usr/lib/libc.a # # ARCH_SYSROOT_DIR: the sysroot of the selected multilib variant, # deduced from ARCH_LIBC_A_LOCATION by removing # usr/lib[32|64]/libc.a at the end of the path. # Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/ # # ARCH_LIB_DIR: 'lib', 'lib32' or 'lib64' depending on where libraries # are stored. Deduced from ARCH_LIBC_A_LOCATION by # looking at usr/lib??/libc.a. # Ex: lib # # ARCH_SUBDIR: the relative location of the sysroot of the selected # multilib variant compared to the main sysroot. # Ex: mips16/soft-float/el # # SUPPORT_LIB_DIR: some toolchains, such as recent Linaro toolchains, # store GCC support libraries (libstdc++, # libgcc_s, etc.) outside of the sysroot. In # this case, SUPPORT_LIB_DIR is set to a # non-empty value, and points to the directory # where these support libraries are # available. Those libraries will be copied to # our sysroot, and the directory will also be # considered when searching libraries for copy # to the target filesystem. # # Please be very careful to check the major toolchain sources: # Buildroot, Crosstool-NG, CodeSourcery and Linaro # before doing any modification on the below logic. ifeq ($(BR2_STATIC_LIBS),) define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS $(Q)$(call MESSAGE,"Copying external toolchain libraries to target...") $(Q)for libs in $(TOOLCHAIN_EXTERNAL_LIBS); do \ $(call copy_toolchain_lib_root,$$libs); \ done endef endif ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY),y) define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_GDBSERVER $(Q)$(call MESSAGE,"Copying gdbserver") $(Q)ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ gdbserver_found=0 ; \ for d in $${ARCH_SYSROOT_DIR}/usr \ $${ARCH_SYSROOT_DIR}/../debug-root/usr \ $${ARCH_SYSROOT_DIR}/usr/$${ARCH_LIB_DIR} \ $(TOOLCHAIN_EXTERNAL_INSTALL_DIR); do \ if test -f $${d}/bin/gdbserver ; then \ install -m 0755 -D $${d}/bin/gdbserver $(TARGET_DIR)/usr/bin/gdbserver ; \ gdbserver_found=1 ; \ break ; \ fi ; \ done ; \ if [ $${gdbserver_found} -eq 0 ] ; then \ echo "Could not find gdbserver in external toolchain" ; \ exit 1 ; \ fi endef endif define TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS $(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \ ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ SUPPORT_LIB_DIR="" ; \ if test `find $${ARCH_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \ LIBSTDCPP_A_LOCATION=$$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \ if [ -e "$${LIBSTDCPP_A_LOCATION}" ]; then \ SUPPORT_LIB_DIR=`readlink -f $${LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \ fi ; \ fi ; \ ARCH_SUBDIR=`echo $${ARCH_SYSROOT_DIR} | sed -r -e "s:^$${SYSROOT_DIR}(.*)/$$:\1:"` ; \ $(call MESSAGE,"Copying external toolchain sysroot to staging...") ; \ $(call copy_toolchain_sysroot,$${SYSROOT_DIR},$${ARCH_SYSROOT_DIR},$${ARCH_SUBDIR},$${ARCH_LIB_DIR},$${SUPPORT_LIB_DIR}) endef # Special installation target used on the Blackfin architecture when # FDPIC is not the primary binary format being used, but the user has # nonetheless requested the installation of the FDPIC libraries to the # target filesystem. ifeq ($(BR2_BFIN_INSTALL_FDPIC_SHARED),y) define TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS_BFIN_FDPIC $(Q)$(call MESSAGE,"Install external toolchain FDPIC libraries to staging...") $(Q)FDPIC_EXTERNAL_CC=$(dir $(TOOLCHAIN_EXTERNAL_CC))/../../bfin-linux-uclibc/bin/bfin-linux-uclibc-gcc ; \ FDPIC_SYSROOT_DIR="$(call toolchain_find_sysroot,$${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ FDPIC_LIB_DIR="$(call toolchain_find_libdir,$${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ FDPIC_SUPPORT_LIB_DIR="" ; \ if test `find $${FDPIC_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \ FDPIC_LIBSTDCPP_A_LOCATION=$$(LANG=C $${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \ if [ -e "$${FDPIC_LIBSTDCPP_A_LOCATION}" ]; then \ FDPIC_SUPPORT_LIB_DIR=`readlink -f $${FDPIC_LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \ fi ; \ fi ; \ $(call copy_toolchain_sysroot,$${FDPIC_SYSROOT_DIR},$${FDPIC_SYSROOT_DIR},,$${FDPIC_LIB_DIR},$${FDPIC_SUPPORT_LIB_DIR}) endef define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FDPIC $(Q)$(call MESSAGE,"Install external toolchain FDPIC libraries to target...") $(Q)for libs in $(TOOLCHAIN_EXTERNAL_LIBS); do \ $(call copy_toolchain_lib_root,$$libs); \ done endef endif # Special installation target used on the Blackfin architecture when # shared FLAT is not the primary format being used, but the user has # nonetheless requested the installation of the shared FLAT libraries # to the target filesystem. The flat libraries are found and linked # according to the index in name "libN.so". Index 1 is reserved for # the standard C library. Customer libraries can use 4 and above. ifeq ($(BR2_BFIN_INSTALL_FLAT_SHARED),y) define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FLAT $(Q)$(call MESSAGE,"Install external toolchain FLAT libraries to target...") $(Q)FLAT_EXTERNAL_CC=$(dir $(TOOLCHAIN_EXTERNAL_CC))../../bfin-uclinux/bin/bfin-uclinux-gcc ; \ FLAT_LIBC_A_LOCATION=`$${FLAT_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS) -mid-shared-library -print-file-name=libc`; \ if [ -f $${FLAT_LIBC_A_LOCATION} -a ! -h $${FLAT_LIBC_A_LOCATION} ] ; then \ $(INSTALL) -D $${FLAT_LIBC_A_LOCATION} $(TARGET_DIR)/lib/lib1.so; \ fi endef endif # Build toolchain wrapper for preprocessor, C, C++ and Fortran compilers # and setup symlinks for everything else. Skip gdb symlink when we are # building our own gdb to prevent two gdb's in output/host/usr/bin. # The LTO support in gcc creates wrappers for ar, ranlib and nm which load # the lto plugin. These wrappers are called *-gcc-ar, *-gcc-ranlib, and # *-gcc-nm and should be used instead of the real programs when -flto is # used. However, we should not add the toolchain wrapper for them, and they # match the *cc-* pattern. Therefore, an additional case is added for *-ar, # *-ranlib and *-nm. define TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER $(Q)cd $(HOST_DIR)/usr/bin; \ for i in $(TOOLCHAIN_EXTERNAL_CROSS)*; do \ base=$${i##*/}; \ case "$$base" in \ *-ar|*-ranlib|*-nm) \ ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \ ;; \ *cc|*cc-*|*++|*++-*|*cpp|*-gfortran) \ ln -sf toolchain-wrapper $$base; \ ;; \ *gdb|*gdbtui) \ if test "$(BR2_PACKAGE_HOST_GDB)" != "y"; then \ ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \ fi \ ;; \ *) \ ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \ ;; \ esac; \ done endef # # Generate gdbinit file for use with Buildroot # define TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT $(Q)if test -f $(TARGET_CROSS)gdb ; then \ $(call MESSAGE,"Installing gdbinit"); \ $(gen_gdbinit_file); \ fi endef # uClibc-ng dynamic loader is called ld-uClibc.so.1, but gcc is not # patched specifically for uClibc-ng, so it continues to generate # binaries that expect the dynamic loader to be named ld-uClibc.so.0, # like with the original uClibc. Therefore, we create an additional # symbolic link to make uClibc-ng systems work properly. define TOOLCHAIN_EXTERNAL_FIXUP_UCLIBCNG_LDSO $(Q)if test -e $(TARGET_DIR)/lib/ld-uClibc.so.1; then \ ln -sf ld-uClibc.so.1 $(TARGET_DIR)/lib/ld-uClibc.so.0 ; \ fi $(Q)if test -e $(TARGET_DIR)/lib/ld64-uClibc.so.1; then \ ln -sf ld64-uClibc.so.1 $(TARGET_DIR)/lib/ld64-uClibc.so.0 ; \ fi endef TOOLCHAIN_EXTERNAL_BUILD_CMDS = $(TOOLCHAIN_BUILD_WRAPPER) define TOOLCHAIN_EXTERNAL_INSTALL_STAGING_CMDS $(TOOLCHAIN_EXTERNAL_CREATE_STAGING_LIB_SYMLINK) $(TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS) $(TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS_BFIN_FDPIC) $(TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER) $(TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT) endef # Even though we're installing things in both the staging, the host # and the target directory, we do everything within the # install-staging step, arbitrarily. define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_CMDS $(TOOLCHAIN_EXTERNAL_CREATE_TARGET_LIB_SYMLINK) $(TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS) $(TOOLCHAIN_EXTERNAL_INSTALL_TARGET_GDBSERVER) $(TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FDPIC) $(TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FLAT) $(TOOLCHAIN_EXTERNAL_FIXUP_UCLIBCNG_LDSO) endef $(eval $(generic-package))