This is the Buildroot board support for the Xilinx ZC706. The ZC706 is a development board based on the Xilinx Zynq-7000 based All-Programmable System-On-Chip. ZC706 information including schematics, reference designs, and manuals are available from http://www.xilinx.com/products/boards-and-kits/ek-z7-zc706-g.html. uboot.bin -- U-Boot SPL w/ Xilinx boot.bin wrapper --------------------------------------------------- Due to licensing issues, the files ps7_init.c/h are not distributed with the U-Boot source code. These files are required to make a boot.bin file. If you already have the Xilinx tools installed, the following sequence will unpack, patch and build the rfs, kernel, uboot, and uboot-spl. make zynq_zc706_defconfig make uboot-patch cp ${XILINX_SDK_LIB}/hwplatform_templates/ZC706_hw_platform/ps7_init.{c,h} \ output/build/uboot-xilinx-v2014.1/board/xilinx/zynq/ Where ${XILINX_SDK_LIB} is ${XILINX}/SDK/${VERSION}/data/embeddedsw/lib. After copying these files into the U-Boot source tree, you can continue the build with: make *Notice* While the build will successfully complete without the ps7_init.* files, the uboot.bin file generated by this configuration will not function properly on the ZC706. Therefore, it is imperative that the ps7_init.* files be copied into the U-Boot source tree any time the clean, or uboot-dirclean targets are executed. Resulting system ---------------- A FAT32 partition should be created at the beggining of the SD Card and the following files should be installed: - boot.bin - devicetree.dtb - uImage - uramdisk.image.gz - u-boot.img All needed files can be taken from /images/ cp /images/boot.bin /media/sdcard/ cp /images/uImage /media/sdcard/ cp /images/u-boot.img /media/sdcard/ cp /images/zynq-zc706.dtb /media/sdcard/devicetree.dtb cp /images/rootfs.cpio.uboot /media/sdcard/uramdisk.image.gz