See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Experimental SPDY support was dropped so drop the configure option.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes
http://autobuild.buildroot.net/results/76f/76f838b2b33311897f3c2ce82a65f3b73af2c046/
Propagate reverse dependency to janus-gateway. I did not propagate the
reverse dependency to kodi, ola and systemd because they are not
available for nios.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is often difficult to know exactly when make will expand the
variable, and usually it can only be expanded after the dependencies
have been built (e.g. pkg-config or the .pc file). Using a backtick
instead makes it very clear that it will be expanded only while
executing the command.
This change is useful for two cases:
1. The per-package staging (and host) directory will be created as part
of the configure step, so any $(shell ...) variable that is used in
the configure step will fail because the directory doesn't exist
yet.
2. 'make printvars' evaluates the variables it prints. It will therefore
trigger a lot of errors from missing .pc files and others. The
backticks, on the other hand, are not expanded, so with this change
the output of 'make printvars' becomes clean again.
This commit contains only the easy changes: replace $(shell ...) with
`...`, and also replace ' with " where needed. Follow-up commits will
tackle the more complicated cases that need additional explanation.
After this change, the following instances of $(shell ...) will remain:
- All assignments that use :=
- All variables that are used in make conditionals (which don't expand
the backticks).
- All variables that only refer to system executables and make
variables that don't change.
- The calls to check-host-* in dependencies.mk, because it is eval'ed.
[Original patch by Fabio Porcedda, but extended quite a bit by Arnout.]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to new version, and disable building examples.
Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires OpenSSL and IPv6 support and it should probably be an
option since SSL support uses GnuTLS thus making a huge target
footprint with 2 SSL/TLS libraries for full support.
But most of all it's considered experimental.
Fixes:
http://autobuild.buildroot.net/results/836/836c39c11cecbcf9399675ba3ab01202417b9642/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Correcting the indentation inside Config.in. Also adding the missed
license information.
Note: libmicrohttpd is partialy dual licensed, if you don't need or want
to use the HTTPS option you can choose between LPGLv2.1+ and the eCos
license (http://ecos.sourceware.org/license-overview.html).
If you use the HTTPS option you have to agree to the LGPLv2.1+!
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit 7672b1235d.
It turns out that libgnutls.so ends up with a reference to wctomb() on
uClibc, as uClibc doesn't have vasnprintf so gnutls builds its internal
gnulib version of it, referencing wctomb().
Fix it by going back to requiring wchar for the base gnutls library as well.
Fixes http://autobuild.buildroot.net/results/780/780e825e56dc78f1ea347ca462e2e31044428775/
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit f1b86cef98
While the fix makes gnutls build without wchar, it doesn't actually work as
there's no rpl_wctomb implementation so the .so ends up with an undefined
reference to wctomb:
./host/usr/bin/arm-linux-nm -D staging/usr/lib/libgnutls.so.28|grep wctomb
U wctomb
Causing linker errors for packages trying to use it:
CCLD msmtp
host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libgnutls.so:
undefined reference to `wctomb'
collect2: ld returned 1 exit status
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The old 0.4.2 version doesn't seem to be available on the GNU mirrors
anymore, so change to the slightly-less-ancient 0.4.6 version.
We're not moving to the new 0.9.x series yet, as that one needs an
external libgnutls for https support, which we don't have a BR
package for yet.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libmicrohttpd works nicely without https support, so make it optional.
Also ensure the cross-libgcrypt-config is found, rather than whatever
is installed on the host.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we have libtool-2.2.x patch support, we can get rid of a bunch
of _LIBTOOL_PATH = NO, fixing (potential) cross link issues.
Notice: php not changed, as it uses a very old 1.5 version for the
embedded sqlite, where our buildroot-libtool-v1.5.patch doesn't apply.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libmicrohttpd is a library that allows embedding an HTTP server into
an application with a small code and memory footprint.
Signed-off-by: Will Newton <will.newton@gmail.com>
