Now that we've got an mbedtls package in the tree we can enable the
optional support for it in libcurl.
We also remove the comment about polarssl support needing version
1.3.x. Indeed, polarssl was renamed to mbedtls when bought by ARM,
which was circa the 1.3.x polarssl release. Due to this referring to
polarssl 1.3.x doesn't make a lot of sense, and we'll probably never
package polarssl 1.3.x in Buildroot now that mbedtls replaces it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
[Thomas: slightly improve commit log as suggested by Luca, using
explanations from Gustavo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
CVE-2016-0754: remote file name path traversal in curl tool for Windows
CVE-2016-0755: NTLM credentials not-checked for proxy connection re-use
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To build libcurl, we need to override LD_LIBRARY and force it to a sane
value, otherwise libcurl is confused when target == host (see a51ce319,
libcurl: fix configure with openssl when target == host).
That is currently OK, since we always set LD_LIBRARY_PATH to a non-empty
value.
However, we're soon to stop setting it at all.
So, if the user has an empty (or no) LD_LIBRARY_PATH in his envirnment,
we'd end up adding the current working directory to LD_LIBRARY_PATH (as
an empty entry in a colon-separated list is most probably interpreted as
meaning the current working directory, which we do know can cause issue,
and which we expressely check against in support/dependencies/dependencies.sh
Fix that by only using an existing LD_LIBRARY_PATH if it is not empty.
Also use a Makefile construct as it is easier to read than a shell one
(we can do that, as all variables from the environment are available as
make variables).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The license for libcurl is actually 'ISC' not 'ICS'.
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default libcurl uses the C library's DNS resolver which is
synchronous, even if an application is using libcurl's non-blocking mode
of operation.
Configure libcurl to use c-ares if it is selected so that it can resolve
addresses asynchronously if required.
[Peter: explicitly disable c-ares support if not enabled]
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2013-3153 - sensitive HTTP server headers also sent to proxies.
And drop upstream patches.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
curldebug is a more advanced form of debugging for curl which audits
source code with the checksource.pl tool, and treats warnings as errors.
Normally users won't want/need this so disable it since it leads to
failed builds when debug info is enabled (which is what people normally
want).
When buildroot does --enable-debug curl inherently enables curldebug too.
Solves bug #8041.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-3144 - host name out of boundary memory access
CVE-2015-3145 - cookie parser out of boundary memory access
CVE-2015-3148 - Negotiate not treated as connection-oriented
CVE-2015-3143 - Re-using authenticated connection when unauthenticated
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2014-8150 - When libcurl sends a request to a server via a HTTP
proxy, it copies the entire URL into the request and sends if off.
If the given URL contains line feeds and carriage returns those will be
sent along to the proxy too, which allows the program to for example
send a separate HTTP request injected embedded in the URL.
CVE-2014-8151 - libcurl stores TLS Session IDs in its associated Session
ID cache when it connects to TLS servers. In subsequent connects it
re-uses the entry in the cache to resume the TLS connection faster than
when doing a full TLS handshake. The actual implementation for the
Session ID caching varies depending on the underlying TLS backend.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2014-3707 - libcurl's function curl_easy_duphandle() has a bug that
can lead to libcurl eventually sending off sensitive data that was not
intended for sending.
Removed patch that was upstream and now in the release.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For details see
82d923895a (commitcomment-7952726)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2014-3613 cookie leak with IP address as domain
CVE-2014-3620 cookie leak for TLDs
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cURL's homepage is curl.haxx.se and not curl.haxx.nu
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adding configuration options that if libssh2 is selected, compile libcurl
with --with-ssh config flag.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for gnutls, nss and polarssl backends.
Add support for libidn and zlib.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Updating revision of libcurl to version 7.32.0
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since openssl's path is '/etc/ssl/' (specified in our openssl package),
we should also make sure that's what curl is using.
Previously, it's hasn't been specified, which means it changes depending
on the host system where it's compiled.
Signed-off-by: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In 9229b82d63 ('libcurl: needs MMU'),
the libcurl package was disabled on non-MMU systems, due to the usage
of the fork() function in the library.
However, a deeper inspection reveals that fork() is only used in the
implementation of NTLM, an obscure, undocumented, Microsoft specific
authentication method that apparently isn't common anymore. See
http://curl.haxx.se/docs/manpage.html#--ntlm.
Therefore, this commit re-enables libcurl on non-MMU systems by
explicitly disabling the NTLM support. If someone ever needs NTLM
support in Buildroot's libcurl package, it will always be time to add
a libcurl sub-option to enable it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the <pkg>_CONFIG_SCRIPTS mechanism in all packages for which it
does all what the package was doing. A few packages, like libxslt, are
for now left out, since they need some additional fixup (for example a
fixup of includedir).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When openSSL is selected, cURL is configured to use it.
But in this case, the libcurl.pc file /forgets/ to require link
against -ldl.
This can happen, for example, when BR2_PREFER_STATIC_LIB is not set,
but an executable wants to be linked statically (for various reasons
which are irrelevant here).
Fix that by appending a 'Requires: openssl' line to libcurl.pc.in,
but only if openSSL is enabled.
As suggested by Arnout, do it in a post-patch hook, rather as a
post-install hook.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>