The configure step of the busybox package performs 'make oldconfig', which
causes the .config file to be updated. Thus, the .config file is more recent
than our stamp file .stamp_kconfig_fixup_done. On a subsequent build, our
dependency rules would kick in, and run the config fixup again, thus
kicking in the package's configure, build and install steps yet once
more, that, ad infinitum.
One solution is to modify kconfig-package to introduce an explicit touch of
the .kconfig_fixup_config_done stamp file, as post-configure hook.
Another solution, implemented by this patch, is to move the oldconfig call
from the package's .mk file to the kconfig-package infrastructure and make
sure it is done as part of the fixup commands. This way, the stamp file will
only be touched once, after the full fixup (including oldconfig) and no
endless rebuilds will occur.
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch converts the uclibc package to the new kconfig-package
infrastructure, thus removing code duplication and ensuring a consistent
behavior of kconfig packages.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The uclibc-menuconfig command is currently run based on the user-specified
config file, while the fixup of the config file is done afterwards.
However, it makes more sense to do an initial fixup _before_ running
menuconfig, so that the options presented to the user are consistent with
the final configuration.
This patch changes the dependency of the menuconfig target from .config to
.stamp_config_fixup_done to achieve this.
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no real reason to run uclibc-menuconfig in non-parallel mode,
even though one can neither expect performance benefits from a parallel
menuconfig.
Nevertheless, $(MAKE) is the default, so this patch removes the unnecessary
non-default $(MAKE1) usage for uclibc-menuconfig.
This is a simplification introduced in preparation of the kconfig-package
infrastructure.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the sequence:
make uclibc-menuconfig
make uclibc-update-config
the freshly configured settings from the menuconfig are lost during the
update-config step. This is because update-config depends on the configure
step, which starts by copying the config file to the build directory.
Instead, stop depending on the configure step from update-config, and
introduce a new stamp file .stamp_config_fixup_done, which applies any
fixups on the .config file.
An alternative solution would be to add a call to UCLIBC_FIXUP_DOT_CONFIG to
the relevant targets instead of depending on a new stamp file. The advantage
of the stamp file, though, is that we avoid redoing the fixup unnecessarily.
Moreover, in the light of the plan to extract the kconfig-specific bits into
a separate kconfig-package infrastructure, the stamp file rules are more
easily moved into such an infrastructure, while the alternative solution
requires the package .mk file to explicitly call the FIXUP rules which may
more easily be forgotten.
No longer depending on the configure step has the added bonus that
'uclibc-update-config' no longer needs the toolchain to be available, which
makes:
make clean uclibc-menuconfig uclibc-update-config
much faster and user-friendly.
Additionally, make sure that 'make clean uclibc-update-config' works
properly, by depending on .stamp_config_fixup_done so that the config file
is present and fixed.
Fixes bug #7154https://bugs.busybox.net/show_bug.cgi?id=7154
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When executing the sequence 'make clean uclibc-menuconfig', the configured
config file is not taken into account and one starts from the default
settings.
This patch adds an explicit target for the config file and lets the
configure and menuconfig steps depend on it, fixing the problem.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In a subsequent patch, the behavior of UCLIBC_SETUP_DOT_CONFIG will change
so that it only applies fixups to the (already copied) configuration file.
This patch renames this function to UCLIBC_FIXUP_DOT_CONFIG to better match
the future behavior.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If libuClibc is not installed to staging on attempt to build tests following
errors happen:
============
TEST_LINK termios/ termios
.../host/usr/arc-buildroot-linux-uclibc/sysroot/usr/lib/crt1.o: In function `__start':
.../build/uclibc/libc/sysdeps/linux/arc/crt1.S:53: undefined reference to `__uClibc_main'
termios.o: In function `main':
.../build/uclibc/test/termios/termios.c:13: undefined reference to `printf'
.../build/uclibc/test/termios/termios.c:14: undefined reference to `printf'
.../build/uclibc/test/termios/termios.c:16: undefined reference to `stdout'
.../build/uclibc/test/termios/termios.c:16: undefined reference to `fileno'
.../build/uclibc/test/termios/termios.c:16: undefined reference to `ioctl'
.../build/uclibc/test/termios/termios.c:19: undefined reference to `perror'
.../build/uclibc/test/termios/termios.c:21: undefined reference to `printf'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `memcpy'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `malloc'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `abort'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `calloc'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `dl_iterate_phdr'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `realloc'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `memset'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `strlen'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `free'
collect2: error: ld returned 1 exit status
make[3]: *** [termios] Error 1
============
And the simplest solution is to build tests right before installation in
UCLIBC_INSTALL_TARGET_CMDS which follows UCLIBC_INSTALL_STAGING_CMDS so
all required libs are in place.
Interesting note - if one enables uClibc tests after initial full buildroot
build mentioned errors don't happen. This is because uClibc libc libs are
already installed to staging. That's why I didn't noticed this problem before.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Don't try to install ld* tools to staging when it's a static build,
there's no point and it'll be broken once we build a purely-static
uclibc.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch removes the custom kconfig helpers UCLIBC_OPT_SET and
UCLIBC_OPT_UNSET with the common KCONFIG_SET_OPT, KCONFIG_ENABLE_OPT and
KCONFIG_DISABLE_OPT.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_UCLIBC_ARM_TYPE was only used for uClibc 0.9.32 on ARM. Now
that only uClibc 0.9.33 is supported for ARM, there is no point in
keeping BR2_UCLIBC_ARM_TYPE, since the corresponding uClibc options no
longer exist.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is only required for uClibc 0.9.31 and this veriosn is only used by
AVR32 so could be safely removed together with AVR32.
Even 0.9.32 builds well in parallel (at least on x86) so IMHO there's no need
in >= 0.9.33, just disable for a particular broken version.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The use of MAKE1 for uClibc dates back 10 years:
commit 8e5fb3fb4a
Author: Eric Andersen <andersen@codepoet.org>
Date: Sat Dec 11 13:01:10 2004 +0000
Add initial BR2_JLEVEL support, with some exceptions for apps that
have broken 'make -j' support
Since that time there were lots of improvements in uClibc that seem to allow
parallel building of libs finally.
Unfortunately uClibc tests have dependences on previously built files,
that's why tests left with MAKE1.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently we configure uClibc to use kernel headers from "staging" folder with
KERNEL_HEADERS="$(STAGING_DIR)/usr/include". This path is added to include
search path of uClibc build system in Rules.mak "CFLAGS += -I$(KERNEL_HEADERS)".
At the same time on uClibc installation to "staging" we point to the same
location "$(STAGING_DIR)/usr" (headers effectively go in "usr/include").
So after every installation to "staging" dependences get touched (even though we
copy the same headers every time) and so we may see lots of sources in uClibc
get rebuilt.
This has 2 consequences:
1. Longer build time - becase even on ordinary buildroot build uClibc is built
twice. On "uclibc building" and on "uclibc installation to target".
2. Symbols in libuClibc built initially (that is later installed in
"staging/sysroot") are situated with different offset compared to second build
(later copied in "target"). This happens because as described above only part
of sources get rebuilt and then on final linkage object files are linked in
different order.
And (2) leads to problems on remote rebugging: gdbserver reports offsets that
correspond to pointless assembly in libuClibc on host.
Here's how it looks like.
Before this patch:
$ cd ~/br2_output/i586/target/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000c42c 54 FUNC GLOBAL DEFAULT 7 kill
$ cd ~/br2_output/i586/staging/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000b518 54 FUNC GLOBAL DEFAULT 7 kill
After this patch:
$ cd ~/br2_output/i586/target/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000b518 54 FUNC GLOBAL DEFAULT 7 kill
$ cd ~/br2_output/i586/staging/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000b518 54 FUNC GLOBAL DEFAULT 7 kill
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Noam Camus <noamc@ezchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit a5e92d92e7 converted uClibc to the
package infrastructure, but while doing so removed support for the
documented uclibc-update-config make target. This make target copies the
uclibc .config file back to the original (typically version-controlled)
configuration file.
As this was an unintentional removal, this patch re-adds the
uclibc-update-config target.
Reported-by: Dan Moulding <dan.moulding@rackwareinc.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package infrastructure add automatically the "dirs" dependency so
remove it when the package infrastructure is being used.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The three typical packages that use .config files in buildroot copy the
config file at different times in the build process:
busybox copies its .config from the post-extract hook.
linux copies its .config in the configure_cmds.
uclibc copies its .config from the post-patch hook.
Copying the .config file from the configure step is the only way to properly
support an OVERRIDE_SRCDIR that does not yet have the .config file, because
the extract and patch steps are skipped in that case.
In a previous patch, the situation was already fixed for busybox. This patch
applies the same fix to uclibc: copy the config file from the configure
step, as linux is doing.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be able to use top-level parallel make we must not depend in a rule
on the order of evaluation of the prerequisites, so instead of relying
on the left to right ordering of evaluation of the prerequisites add
an explicit rule to describe the dependencies.
We cannot use the pattern rules because they must have the same
dependency for every package, but we need to change the dependencies
depending on $(2)_OVERRIDE_SRCDIR variable value, so we must use a
more flexible way like $(2)_TARGET_% variables.
So add explicit dependencies for the following stamp files:
$(2)_TARGET_EXTRACT
$(2)_TARGET_PATCH
$(2)_TARGET_CONFIGURE
$(2)_TARGET_BUILD
$(2)_TARGET_INSTALL_STAGING
$(2)_TARGET_INSTALL_TARGET
$(2)_TARGET_INSTALL_IMAGES
$(2)_TARGET_INSTALL_HOST
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit makes the dependency from the target toolchain explicit.
This way we can buid from command line a package that use
inner-generic-package right after the configuration phase, example:
make clean <package-name>
Also remove TARGETS_ALL because the only purpose was to add toolchain
dependency so it's superseded by this commit.
To prevent circular dependency add the new variable
<pkgname>_ADD_TOOLCHAIN_DEPENDENCY to avoid adding the toolchain
dependency for toolchain packages.
This is also a step forward supporting top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If $(UCLIBC_CONFIG_FILE) is read-only (eg. because Buildroot's
source dir is), the sed fixups to .config fail.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the Xtensa architecture uses the "snapshot" version of
uClibc. This means that the build is not reproducible, since it will
pick whatever latest version of uClibc is available at the moment of
the build.
This commit replaces that by adding a special Xtensa version, which
points to a well-known Git commit. This is something we should
hopefully be able to remove once the uClibc people realize that doing
a 0.9.34 release would be useful.
Should probably fix:
http://autobuild.buildroot.org/results/5d6/5d6072a038acf894d832704e36c1d43f0254abf5/build-end.log
at least I wasn't able to reproduce the build problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[baruch: use a more recent uClibc version]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The DODEBUG configuration option in uClibc is broken, even for widely
used architectures like ARM. Therefore, any Buildroot configuration
that has BR2_ENABLE_DEBUG enabled and uses uClibc with the internal
toolchain backend will fail, with an error like:
http://autobuild.buildroot.net/results/d34/d34238c209cf2ef63371a598ab9218165c90f864/build-end.log
This error was also reported recently by a Buildroot user.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the idea of skipping the intermediate gcc step seems to work
fine in most situations, it causes problems with the SSP
support. Until we can figure out a proper solution for this problem,
we need to revert back to the previous solution of a three stages
build.
This reverts commit 2babed4a50.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
commit c798bec25 "uclibc: set MMU usage accordingly" defines UCLIBC_MMU_CONFIG,
but forgot adding it to UCLIBC_SETUP_DOT_CONFIG. Fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When NPTL support was introduced, gcc required a three stages build
process. Since gcc 4.7, this is no longer necessary, and it is
possible to get back to a two stages build process. This patch takes
advantage of this, by doing a two stages build process when possible.
We introduce a few hidden kconfig options:
* BR2_GCC_VERSION_NEEDS_THREE_STAGE_BUILD, which is set by the gcc
Config.in logic to indicate that the compiler might need a three
stages build. Currently, all versions prior to 4.7.x are selecting
this kconfig option.
* BR2_TOOLCHAIN_LIBC_NEEDS_THREE_STAGE_BUILD, which indicates whether
the C library might need a three stages build. This is the case for
eglibc, and uClibc when NPTL is enabled.
* BR2_TOOLCHAIN_NEEDS_THREE_STAGE_BUILD finally is enabled when both
of the previous options are enabled. It indicates that a three
stages build is actually needed.
In addition to those options, the uClibc/gcc build logic is changed to
use only a two stages build process when possible.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On architectures that lack a MMU (like blackfin) uclibc just undefined
ARCH_HAS_MMU which disabled ARCH_USE_MMU.
But for other architectures which may or may not have one like ARM we
need to set this according to user choice.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When BR2_UCLIBC_ARM_BX is not set, UCLIBC_OPT_UNSET gets called with an extra
argument. Remove it.
Signed-off-by: Justin Maggard <jmaggard10@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we've dropped 0.9.31.x we can use the startfiles /
install_startfiles targets instead of building and installing them by
hand.
Fixes internal blackfin toolchain build errors regarding crtreloc.o
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These are broken for blackfin unfortunately so they're disabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current SSP handling is incomplete.
First we need to build uClibc with SSP support for a complete
"experience".
Second, it doesn't hurt to add -fstack-protector-all to the
CFLAGS/CXXFLAGS since most users would expect buildroot to do this
rather than adding the flags themselves.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It runs out of registers, it fails even in official form
(COMPILE_IN_THUMB_MODE=y) so just build it in ARM mode since EABI
mandates interworking.
Tested in an arm920t board.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These were required with ARC gcc 4.4.7; ARC gcc 4.8 has been changed
to behave the same as other architectures with -nostdlib, making this
option obsolete.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the move of uclibc to package/uclibc, the uclibc-menuconfig target now
depends on uclibc-configure, which brings in the build of
binutils/gcc-initial/mpfr/gmp, causing it to take ages with a clean tree.
Fix it by moving the basic .config mangling to the patch step, and depend
on that for menuconfig instead.
Notice that this is broken for _OVERRIDE_SRCDIR users, just like for
busybox, but as that is presumably a small subset of the buildroot
user base (and these advanced users can just run menuconfig in their
local uClibc tree), so this is considered the lesser evil of the two.
The proposed out-of-tree build series will also cause problems with
this.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
... since we now only support EABI for ARM, we only need to
force EABI unconditionally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: update manual to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
