Upstream has changed version numbering scheme since version 13, which
came after version 0.12.
There is now a make install target, so we can drop the manual file
installing. The make install target also installs the new efibootdump
tool.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has changed version numbering scheme since version 25, which
came after version 0.24.
The two patches that we had in package/efivar/ were backports and so can
be dropped with this bump.
This new version also fixes the build failure with gcc 6.x, so:
Fixes:
http://autobuild.buildroot.net/results/ea6/ea6968d5d0fd0d8ee64e045e2aa56c8e8a0b7b14
[Peter: require GCC 4.9+, adjust Config.in nvme.h comment]
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The MirOS Korn Shell is a quite complete posix shell implementation,
is rather small and supports vi mode properly.
[Peter: use mksh.1 as license file, use TARGET_CONFIGURE_OPTS, install -D]
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After update to uClibc-ng 1.0.18 transmission fails to
compile as the special treatment for sys/quota.h isn't required
anymore, because upstream synced with GNU libc to fix a samba4
compile problem.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
https://nodejs.org/en/blog/release/v6.7.0/
The patches from 6.2.1 have been copied to 6.7.0 with the following
changes:
- Add 0002-inspector-don-t-build-when-ssl-support-is-disabled.patch
to disable the new V8 inspector when openssl is not included.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reported via #buildroot, the newly activated locale
tool should only build for the target, not for the host.
Fix from upstream.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
acpitool requires threads.
However, it does not check for threads in its configure script, so
forgets to link with -pthreads, so fails to build in static-only
scenarii.
However, upstream has been dead for the past 7+ years now, so there is
not much point trying to fix this. Besides, a system with ACPI is most
probably a biggish system, so shared libs will probably be enabled, so
we just require shared libs.
As for bfin, the cryptic configure failure:
configure: error: C++ compiler cannot create executables
is due to the order in which AC_PROG_CXX and AC_PROG_CC are called.
Calling AC_PROG_CC first fixes this error message in this specific case.
However, this is a toolchain issue, as this does not occur for other
toolchains.
Still, inverting the call would anyway then cause linking errors:
/home/ymorin/dev/buildroot/O/host/usr/bin/bfin-linux-g++ -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o acpitool main.o acpitool.o ac_adapter.o toshiba.o asus.o thinkpad.o cpu.o battery.o freq.o -lgcc
acpitool.o: In function `Has_ACPI(char*)':
acpitool.cpp:(.text+0x1be): undefined reference to `_Unwind_Resume'
acpitool.o: In function `Get_Kernel_Version(char*, int)':
acpitool.cpp:(.text+0x2aa): undefined reference to `_Unwind_Resume'
acpitool.o: In function `Set_Kernel_Version()':
acpitool.cpp:(.text+0x43e): undefined reference to `_Unwind_Resume'
acpitool.o: In function `Do_Fan_Info(int)':
acpitool.cpp:(.text+0x60a): undefined reference to `_Unwind_Resume'
acpitool.o: In function `Show_WakeUp_Devices(int)':
acpitool.cpp:(.text+0x770): undefined reference to `_Unwind_Resume'
acpitool.o:acpitool.cpp:(.text+0x9ca): more undefined references to `_Unwind_Resume' follow
/home/ymorin/dev/buildroot/O/host/opt/ext-toolchain/bin/../lib/gcc/bfin-buildroot-linux-uclibc/6.1.0/../../../../bfin-buildroot-linux-uclibc/bin/ld: acpitool: hidden symbol `___udivsi3' in /home/ymorin/dev/buildroot/O/host/opt/ext-toolchain/bin/../lib/gcc/bfin-buildroot-linux-uclibc/6.1.0/libgcc.a(_udivsi3.o) is referenced by DSO
/home/ymorin/dev/buildroot/O/host/opt/ext-toolchain/bin/../lib/gcc/bfin-buildroot-linux-uclibc/6.1.0/../../../../bfin-buildroot-linux-uclibc/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
Again, because upstream is dead, there's not much point trying to fix
this... And since there's not many chances that a bfin board has ACPI,
we just disable acpitool for bfin.
Fixes various build failures:
http://autobuild.buildroot.org/results/6fc/6fc568228b7c5c5be9e35aae73fb09b431896325/http://autobuild.buildroot.org/results/f1e/f1eb711123c2d8aea8399b8984a007afec4f65fb/http://autobuild.buildroot.org/results/70e/70eb7d7ed93a122b4c7a9890877e721b8d777b00/
[...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to 1.0.18
This includes all patches, so remove them.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes an out-of-bounds memory read in the ID3v2 parser for tags that
claim an unrealistically small length. This crashes mpg123 or any
application using libmpg123 with activated ID3v2 parsing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the main python-pyqt5 option is not visible when BR2_PACKAGE_QT
is enabled, the comment should also not be visibled when
BR2_PACKAGE_QT is enabled.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-7052 - Missing CRL sanity check
[Peter: drop CVE 6309 from description as pointed out by Baruch]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In 99067c1 (package/ustr: don't run ldconfig), we tried to fix parallel
build issues, caused by running ldconfig, by not running ldconfig.
We borked that fix, as build issues still crop up from time to time:
ldconfig is still run because our override is not accounted for by
ustr's buildsystem. Instead of overriding ldconifg at build time, we
need to override it at configure time.
Just do that.
Fixes:
http://autobuild.buildroot.org/results/7b1/7b12f00612da4ad8dffe0c8010b95db881630b17/http://autobuild.buildroot.org/results/242/24209ba13f56889357024b0e460d508b7a03d1d2/http://autobuild.buildroot.org/results/963/963141370a9b127f473a7fae161656a6b0a4f33b/
(Those are the only three build issues in the more-than-a-month since we
initially tried to fix that.)
To be noted: upstream has accepted my patch, plus they completely
removed calls to ldconfig altogether. Add a comment so we don't forget
to remove our workaround when we bump.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package archive includes a proper licence file now, so use it instead of
a source file.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Here are the main U-Boot modifications:
- Add Spansion flash support
- Add secure boot (HAB) support
Here are the main Linux modifications:
- Add HDMI2CSI 75Hz support
- Add KD024FM display support
- Fix PCIe reset gpios in device tree
- Backport xhci fixes from mainline
- Fix SOM PHY address bug
- Enable IPU Prefetch engine for 6QP
- Fix ft5x06 touch bug
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With newer ARC toolchain obsolete -marcXXX were finally deperecated
and so compiler throws errors now about unknown option.
Solution is as simple as switching to more generic -mcu-XXX
options. Which we do. Unfortunately that change in upstream U-Boot [1]
happened right after v2016.09 was released an so we need to have that fix
for v2016.07 which is mentioned in axs10x defconfigs and for the latest
U-Boot release v2016.09 (which is selected by default if no defconfig is
used).
Once we deprecate either U-Boot version in U-Boot corresponding patch
should be removed essentially.
[1] http://git.denx.de/?p=u-boot.git;a=commit;h=7c8d81605302e7d7fdd3e7d8eb69302bddc64a2c
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: handle the U-Boot bump to 2016.09.01.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most importantly this version includes a change to kvm-unit-tests which
means it will stop looking attempting to include host headers. This
change should fix build breakage on i386.
"ERROR: unsafe header/library path used in cross-compilation: '-I'
'/lib/modules/3.13.0-042stab111.12/build/include'"
The new version also includes more powerpc tests.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow building a ext4 rootfs type.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow building a ext4 rootfs type.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also drop upstream patch.
Drop propietary RPI support since it's gone upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016.09.01 is a bugfix release, so bump to this version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
