Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_beforelight uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/164bb80f261f48525de508b5f74321f2fec91cce
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GCC 8 demands that the size of the string copied by strncpy be smaller
than the size of the destination to keep space for the trailibg '\0'.
This causes a compilation error in pam_tacplus, so add a patch already
sent uptream to fix it.
Fixes:
http://autobuild.buildroot.net/results/da6d150e470046c03c5f7463de045604e15e4a30/
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Execution permissions cause systemd to throw runtime warnings since
systemd service files are essentially a type of configuration file and
are not designed to be executed like init scripts.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgpgme installs a gpgme-config script, it should be tweaked using
the <pkg>_CONFIG_SCRIPTS mechanism. This is generally useful and is
going to be particularly important with per-package directories.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set ac_cv_path_WAYLAND_SCANNER to the wayland-scanner in the host
directory otherwise build will fail because libva will use pkgconfig to
find it
Fixes:
- http://autobuild.buildroot.org/results/836d3a7085c576f607b1532d5204a54d6c2c1e66
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump kernel, U-Boot and ATF packages to the NXP imx_4.14.62_1.0.0_beta
release.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
clamav has an optional systemd dependency
Moreover, since the bump to 1.5.3, pkgconf prepends the sysroot to all
absolute paths found in the .pc file. This is correct when the paths
refer to something in STAGING_DIR (e.g. libdir, includedir), but not
when it refers to something used for the target.
clamav uses the systemdsystemunitdir variable from systemd.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the
systemdsystemunitdir to use explicitly instead of relying on systemd.pc.
Fixes:
- http://autobuild.buildroot.org/results/fe526c60542527112e6441e453b4df5de49242d9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
libv4l uses the udevdir variable from libudev.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the udevdir to use
explicitly instead of relying on libudev.pc.
Fixes:
- http://autobuild.buildroot.org/results/597cd814225c2af9b896a1f25f98cdff33fd810a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
bluez5_utils uses the sysconfdir variable from dbus-1.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the sysconfdir to use
explicitly instead of relying on dbus-1.pc.
Fixes:
- http://autobuild.buildroot.org/results/498e7e368fbb3d69c2f311e3e5bc213e507b8023
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
iwd uses the datadir variable from dbus-1.pc to decide where to install
things. Since DESTDIR is prepended to the install destination, this will
end up in the wrong location.
Until a better solution is found in pkgconf, pass the usbdropdir to use
explicitly instead of relying on dbus-1.pc.
Fixes:
- http://autobuild.buildroot.org/results/2b9e28264248f073cc9973bd4c7a89363ec9c0c3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
acsccid uses the usbdropdir variable from libpcsclite.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the usbdropdir to use
explicitly instead of relying on libpcsclite.pc.
Fixes:
- http://autobuild.buildroot.org/results/9dc76478d81ea2469900a4b4aab0e31fee9c4032
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
ccid uses the usbdropdir variable from libpcsclite.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the usbdropdir to use
explicitly instead of relying on libpcsclite.pc.
Fixes:
- http://autobuild.buildroot.org/results/4d4c1ba7f5d00d1b927ac01ef9851468abfbdff2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Definitions of POLLWRNORM, POLLWRBAND and POLLREMOVE in xtensa linux
kernel are non-standard. Provide bits/poll.h with correct values for
these constants for uclibc-ng.
This fixes the following strace build errors:
In file included from xlat/pollflags.h:4:0,
from poll.c:34:
./static_assert.h:40:24: error: static assertion failed: "POLLWRBAND != 0x0100"
# define static_assert _Static_assert
^
xlat/pollflags.h:75:1: note: in expansion of macro ‘static_assert’
static_assert((POLLWRBAND) == (0x0100), "POLLWRBAND != 0x0100");
^~~~~~~~~~~~~
./static_assert.h:40:24: error: static assertion failed: "POLLREMOVE != 0x0800"
# define static_assert _Static_assert
^
xlat/pollflags.h:117:1: note: in expansion of macro ‘static_assert’
static_assert((POLLREMOVE) == (0x0800), "POLLREMOVE != 0x0800");
^~~~~~~~~~~~~
Fixes:
http://autobuild.buildroot.net/results/5a0112b7a2c81fa5253c9adc93efe415256cd811
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When one of BR2_PACKAGE_FFTW_PRECISION_* is enabled, liquid-dsp links
against fftw3f, fftw3 or fftw3l, but forgets to add the fftw package
in its dependencies. It works fine in practice because "fftw" is
before "liquid-dsp" in the alphabetic ordering, but building with
"make liquid-dsp" or with per-package directory causes a build
failure.
Fix that by adding the missing dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The sdl2_net configure script uses pkg-config to finx sdl2. If it
doesn't find pkg-config, it tries to locate sdl2-config, and defaults
to /usr/bin/sdl2-config, which causes the build to fail with:
arm-linux-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/SDL2'
Fix this by adding host-pkgconf to the dependencies of sdl2_net. We
could have added the right autoconf cache variable to tell the
configure script where sdl2-config is located, but since pkg-config is
tried first, let's use that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 1f0beaf9a8 ("intel-microcode:
bump to version 20180807a") introduced the use of "install -D -t" to
the intel-microcode package. The intent is that install will create
the full destination directory, including all components leading to
it, before copying the files.
Unfortunately, "install -D -t" is only supported since coreutils since
v8.23. Several of the build systems we support have older coreutils
versions, such as Debian 7, which uses coreutils 8.13. Ubuntu 14.04
also doesn't have a recent enough coreutils.
So let's create the directory explicitly first, and then use a more
regular "install -t".
Fixes:
http://autobuild.buildroot.net/results/aa44f9ff90f296f886be6309b3355ed075494fb2/
Note: the "gzip: stdout: Broken pipe" messages in those failures seem
unrelated. We have been able to reproduce the installation failure
without those "Broken pipe" issues, and we have not been able to
reproduce those "Broken pipe" problems.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The lua-cqueues build system uses m4 during the build:
cd /home/test/autobuild/run/instance-1/output/build/lua-cqueues-rel-20161215/src && m4 /home/test/autobuild/run/instance-1/output/build/lua-cqueues-rel-20161215/src/errno.c.m4 >| /home/test/autobuild/run/instance-1/output/build/lua-cqueues-rel-20161215/src/errno.c.tmp
Therefore, the package should depend on host-m4. This has been
detected using per-package directory support, but a minimal defconfig
with just lua and lua-cqueues on a system that doesn't have m4
installed system-wide also exhibits the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Just like the build of the target wine, the build of host wine also
needs bison and flex, otherwise the build fails with:
checking for flex... no
configure: error: no suitable flex found. Please install the 'flex' package.
(and similarly for bison once host-flex is provided)
This was detected using per-package directories. It used to "work"
because host-wine comes alphabetically after host-flex and host-bison,
which are dependencies of target wine.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Rename it to S01syslog-ng to make every init script be called the same
as the executable it starts.
- Indent with tabs, not spaces.
- Do not kill syslog-ng in "reload". Send a SIGHUP signal, instructing
it to perform a re-initialization.
- Support a /etc/default/syslog-ng configuration file.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Split it into S01syslogd and S02klogd to make every init script be
called the same as the executable it starts.
- Implement start, stop, restart and reload as functions, like in other
init scripts, using start-stop-daemon.
- Indent with tabs, not spaces.
- Detect and report start/stop errors (previous version ignored them and
always reported OK).
- Support /etc/default/$DAEMON configuration files.
- Do not kill syslogd in "reload". Send a SIGHUP signal, instructing it
to perform a re-initialization.
- Do not kill klogd in "reload". Send a signal (default 0, which does
nothing). Users can configure this signal in /etc/default/klogd to
either SIGUSR1 or SIGUSR2.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Rename it to S01rsyslogd to make every init script be called the same
as the executable it starts.
- Support a /etc/default/rsyslogd configuration file.
- Indent with tabs, not spaces.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Split S01logging into S01syslogd and S02klogd. Install them only if no
other syslog package is selected and the corresponding daemons are
selected in the Busybox configuration.
- Support /etc/default/$DAEMON configuration files.
- Detect and report start/stop errors (previous version ignored them and
always reported OK).
- Use a separate function for restart.
- Implement reload as restart.
The dependency of busybox on rsyslog and syslog-ng was only needed
because those packages also installed S01logging. Since now they no
longer install the same file, these dependencies are no longer needed.
The dependency on sysklogd is still needed since that one installs the
syslogd and klogd executables with the same name as busybox.
The -n option of syslogd/klogd is obligatory because start-stop-daemon
starts it in the background. Therefore, move it out of the
SYSLOGD_ARGS resp. KLOGD_ARGS variable so the user can no longer remove
it.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Arnout: keep dependency on sysklogd]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
<PKG>_SITE cannot have a trailing slash.
This was not detected by the check in generic-package because it is a
host-only package without Config.in symbol.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
<PKG>_SITE cannot have a trailing slash.
This was not detected by the check in generic-package because it is a
host-only package without Config.in symbol.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
<PKG>_SITE cannot have a trailing slash.
This was not detected by the check in generic-package because it is a
host-only package without Config.in symbol.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- rename BR2_PACKAGE_NETSURF_FRAMEBUFFER to BR2_PACKAGE_NETSURF_SDL,
and use "sdl" everywhere instead of "framebuffer", since really SDL
can display on something else than the framebuffer
- use a "depends on BR2_PACKAGE_LIBGTK2" instead of a "depends on
BR2_PACKAGE_XORG7 + many other depends on + select
BR2_PACKAGE_LIBGTK2"
- use PKG_CONFIG_HOST_BINARY for the pkg-config path]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The variable QMAKE_COMPILER determines the compiler flavour (e.g.
gcc, clang, llvm, msvc etc.) and not a compiler path. Changing
it confuses the platform test of the qt5webengine package
(mkspecs/features/platform.prf):
defineTest(isPlatformSupported) {
QT_FOR_CONFIG += gui-private
linux {
if(!gcc:!clang)|intel_icc {
skipBuild("Qt WebEngine on Linux requires clang or GCC.")
return(false)
}
gcc:!clang:!isGCCVersionSupported(): return(false)
}
}
Revert the variable change introduced by commit 'package/qt5/qt5base: use
ccache for building host code' ([2]).
Fixes raspberrypi3_qt5we_defconfig/qt5webengine build ([1]):
Qt WebEngine on Linux requires clang or GCC.
QtWebEngine will not be built.
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/131217091
[2] https://git.buildroot.net/buildroot/commit/?id=c2ea056a1b34fd1354100d08e603b9374e225968
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security vulnerabilities:
- Node.js: Denial of Service with large HTTP headers (CVE-2018-12121)
- Node.js: Slowloris HTTP Denial of Service (CVE-2018-12122 / Node.js)
- Node.js: Hostname spoofing in URL parser for javascript protocol
(CVE-2018-12123)
- Node.js: HTTP request splitting (CVE-2018-12116)
- OpenSSL: Timing vulnerability in DSA signature generation (CVE-2018-0734)
- OpenSSL: Microarchitecture timing vulnerability in ECC scalar
multiplication (CVE-2018-5407)
For more details, see the announcement:
https://nodejs.org/en/blog/release/v8.14.0/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move imports from six package after the standard modules. Resolves
pylint warnings.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In some cases which seem to depend on how toolchain headers
got installed or configured we may face well-known by now failure
fixed in upstream with [1]:
------------------------------>8----------------------------
In file included from nat/linux-ptrace.c:20:
nat/linux-ptrace.h:175:22: error: expected identifier before numeric constant
# define TRAP_HWBKPT 4
^
nat/linux-ptrace.h:175:22: error: expected '}' before numeric constant
In file included from .../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/signal.h:58,
from build-gnulib/import/signal.h:52,
from .../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/sys/wait.h:36,
from ./common/gdb_wait.h:23,
from nat/linux-ptrace.c:24:
.../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/bits/siginfo-consts.h:156:1: note: to match this '{'
{
^
In file included from nat/linux-ptrace.c:20:
nat/linux-ptrace.h:175:22: error: expected unqualified-id before numeric constant
# define TRAP_HWBKPT 4
^
In file included from .../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/features.h:428,
from .../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/bits/libc-header-start.h:33,
from .../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/stdio.h:27,
from build-gnulib/import/stdio.h:43,
from ./common/common-defs.h:52,
from nat/linux-ptrace.c:19:
.../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/sys/wait.h:158:1: error: expected declaration before '}' token
__END_DECLS
^~~~~~~~~~~
------------------------------>8----------------------------
Back-porting the fix for ARC now to get predictably successful results.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=5a6c3296a7a90694ad4042f6256f3da6d4fa4ee8
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The host forces HTTPS regardless. This can be seen in the build logs:
>>> host-libopenssl 1.0.2q Downloading
URL transformed to HTTPS due to an HSTS policy
--2018-12-10 09:53:27-- https://www.openssl.org/source/openssl-1.0.2q.tar.gz
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
check-package complains with:
package/qt5/qt5virtualkeyboard/Config.in:59: help text: <tab><2 spaces><62 chars> (http://nightly.buildroot.org/#writing-rules-config-in)
So let's rewrap the Config.in help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch extends the configure checks for re-entrant resolver
functions to fix uclibc builds.
Quoting Yann:
http://lists.busybox.net/pipermail/buildroot/2017-September/203004.html
"As a final stroke of genius, asterisk checks for the re-entrant variant
of res_ninit(), and concludes that all such functions are available,
including res_nsearch(). Uclibc-ng has the former but not the latter, so
the build fails. Since there is no cache variable for that check, we
can't pre-feed that result to configure, and fixing it is a bigger
endeavour. So we make asterisk depend on glibc for now, until someone
is brave enough to fix it."
Musl builds are still broken:
output/build/asterisk-16.0.0/include/asterisk/astmm.h:165:35:
error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘->’ token
Do_not_use_calloc__use_ast_calloc->fail(a, b)
output/build/asterisk-16.0.0/include/asterisk/astmm.h:169:77:
error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘->’ token
Do_not_use_free__use_ast_free_or_ast_std_free_for_remotely_allocated_memory->fail(a)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- removed patches applied upstream, re-numbered remaining patches
- not available for static builds anymore:
8e36064109
- fixed license hashes after upstream whitespace removal
fd0ca1c3f9
- removed configure options not provided by upstream anymore
- fixed configure error, the file is included in asterisk source:
checking for bridges/bridge_softmix/include/hrirs.h... configure:
error: cannot check for file existence when cross compiling
- added "-without-pjproject-bundled" as noted in
https://wiki.asterisk.org/wiki/display/AST/New+in+15
- upstream switched from ncurses to libedit:
d6fda173a4
- added libatomic when needed
- updated core sound package
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
