Asciidoc supports two syntaxes for section titles: two-line titles (title
plus underline consisting of a particular symbol), and one-line titles
(title prefixed with a specific number of = signs).
The two-line title underlines are:
Level 0 (top level): ======================
Level 1: ----------------------
Level 2: ~~~~~~~~~~~~~~~~~~~~~~
Level 3: ^^^^^^^^^^^^^^^^^^^^^^
Level 4 (bottom level): ++++++++++++++++++++++
and the one-line title prefixes:
= Document Title (level 0) =
== Section title (level 1) ==
=== Section title (level 2) ===
==== Section title (level 3) ====
===== Section title (level 4) =====
The buildroot manual is currenly using the two-line titles, but this has
multiple disadvantages:
- asciidoc also uses some of the underline symbols for other purposes (like
preformatted code, example blocks, ...), which makes it difficult to do
mass replacements, such as a planned follow-up patch that needs to move
all sections one level down.
- it is difficult to remember which level a given underline symbol (=-~^+)
corresponds to, while counting = signs is easy.
This patch changes all two-level titles to one-level titles in the manual.
The bulk of the change was done with the following Python script, except for
the level 1 titles (-----) as these underlines are also used for literal
code blocks.
This patch only changes the titles, no other changes. In
adding-packages-directory.txt, I did add missing newlines between some
titles and their content.
----------------------------------------------------------------------------
#!/usr/bin/env python
import sys
import mmap
import re
for input in sys.argv[1:]:
f = open(input, 'r+')
f.flush()
s = mmap.mmap(f.fileno(), 0)
# Level 0 (top level): ====================== =
# Level 1: ---------------------- ==
# Level 2: ~~~~~~~~~~~~~~~~~~~~~~ ===
# Level 3: ^^^^^^^^^^^^^^^^^^^^^^ ====
# Level 4 (bottom level): ++++++++++++++++++++++ =====
def replace_title(s, symbol, replacement):
pattern = re.compile(r'(.+\n)\%s{2,}\n' % symbol, re.MULTILINE)
return pattern.sub(r'%s \1' % replacement, s)
new = s
new = replace_title(new, '=', '=')
new = replace_title(new, '+', '=====')
new = replace_title(new, '^', '====')
new = replace_title(new, '~', '===')
#new = replace_title(new, '-', '==')
s.seek(0)
s.write(new)
s.resize(s.tell())
s.close()
f.close()
----------------------------------------------------------------------------
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (all user-visible options should be
prefixed with BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_CONFIG but not BR2_CONFIG.
Still export BUILDROOT_CONFIG but pointing to some phony value, to
make sure that scripts that still use it fail in a predictable way.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also export BUILD_DIR for post-{build,images} hooks, so they do have
a place to store generated files.
Note: this will be more einteresting for the instrumentation of steps,
to come in a later patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
$(BUILD_DIR) is a nice place to put files generated during the build.
With the advent of user-supplied step-hooks, they may want to store
some information on the build.
Export BUILD_DIR to that effect; update manual accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It can be useful to have different configuration use the same post-build
and/or post-image scripts as they share a common infrastructure, but yet
have minor differentiation.
This option allows passing zero or more additional arguments to each
post-build or post-image script.
The same set of extra arguments are passed to all scripts, it is not
possible to pass different arguments to each script.
[Peter: fix help text, post-image gets called with the images dir]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* update post-build scripts mechanism that now support several scripts
* fix formatting
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This makes it possible to put empty directories in the overlay.
Thanks to Aras Vaichas for pointing that out.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The order of the solutions to customize the root filesystem is
changed: we now mention the post-build script mechanism *before* the
custom root filesystem skeleton mechanism, because the former is
preferred over the latter.
In addition to this, we give a few more details about direct
customization of the root filesystem in output/target, and about the
custom target skeleton solution.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix minor typos]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The filesystem overlay is a tree that is copied over the target fs
after building everything - which is currently usually done in the
post-build script.
[Peter: don't ignore missing directories]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several projects use the kernel style O=<dir> syntax to build out of tree,
and atleast uClibc doesn't check that it was explictly passed on the command
line, so setting it in the environment breaks the build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Support scripts (in support/) may need to parse the .config file, so give
them an easy access to it, by exporting BUILDROOT_CONFIG with the fully-
qualified path to .config.
Also, post-build scripts may need to reference a few locations, so export
those, too.
Note: we export both O and BASE_DIR. Although they are the same, BASE_DIR
is used internally, while O is used on the command line, which makes it a
bit ambiguous to know which to use. As users use O= on the command line,
they will probably tend to use that in their post-build scripts.
Update doc accordingly.
[Peter: fixed typo]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The new skeleton of the manual as it has been thought:
1. About Buildroot:
Presentation of Buildroot
2. Starting up:
Everything to quickly and easily start working with Buildroot
3. Working with Buildroot
Basics to make your work fitting your needs
4. Troubleshooting
5. Going further in Buildroot's innards
Explaination of how buildroot is organised, how it works, etc
6. Developer Guidelines
7. Getting involved
8. Contibuting to Buildroot
9. Legal notice
10. Appendix
It is easy to distinguish two parts in this plan:
- Sections 1 to 4 mainly address people starting with Buildroot
- Sections 5 to 10 are more focused on how to develop Buildroot itself
Most of the existing sections have just been moved in the hierarchy,
few were split and dispatch in, what i think was the relevant section,
and numerous others have been created.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This directory groups the following elements:
* the default root filesystem skeleton
* the default device tables
* the Config.in options for system configuration (UART port for
getty, system hostname, etc.)
* the make rules to apply the system configuration options
Even though the skeleton and device tables could have lived in fs/, it
would have been strange to have the UART, system hostname and other
related options into fs/. A new system/ directory makes more sense.
As a consequence, this patch also removes target/Makefile.in, which
has become useless in the process.
[Peter: fixup TARGET_SKELETON settings / documentation to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
