Currently, the license files for the many firmware files are installed
in the target, alongside the firmware files, and are not available to the
legal-info infrastructture.
This patch separates the license files from the firmware files, and makes
them available to the legal-info infrastructure, so they get installed
with all the other license files.
Since most firmware files are proprietary (at least those we currently
install), we just have a single license definition. When we later support
other firmwares that have an OSS license, those can add their own
licensing information on a case-by-case basis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Get a bunch of new firmwares, and some firmware bumps.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fio program uses posix_madvise(). However, posix_madvise() is only
available in the Git tree of uClibc, and in Buildroot's version of
uClibc 0.9.33, thanks to the huge number of backported patches that we
carry.
Therefore, trying to build fio with an external uClibc toolchain is
most likely going to fail (as the uClibc version is most likely an
official stable release, and no stable release of uClibc ever had the
support for posix_madvise()). And similarly, building fio with uClibc
0.9.31 and 0.9.32 is always going to fail. We disable those use cases
to avoid repeated autobuilder failures.
No kconfig comment has been added, because we don't have a
well-defined way of specifying such exceptions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the underlying reasons, see previous patch, titled:
package/opengl/libegl: switch to package-defined providers
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the underlying reasons, see previous patch, titled:
package/opengl/libegl: switch to package-defined providers
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the underlying reasons, see previous patch, titled:
package/opengl/libegl: switch to package-defined providers
Reported-by: David Corvoysier <david.corvoysier@orange.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the underlying reasons, see previous patch, titled:
package/opengl/libegl: switch to package-defined providers
Reported-by: David Corvoysier <david.corvoysier@orange.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the underlying reasons, see previous patch, titled:
package/opengl/libegl: switch to package-defined providers
Reported-by: David Corvoysier <david.corvoysier@orange.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the underlying reasons, see previous patch, titled:
package/opengl/libegl: switch to package-defined providers
Reported-by: David Corvoysier <david.corvoysier@orange.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems weird that the libegl package has to know all of the packages
that may provide the EGL implementation.
This also breaks implementation provided by packages in BR2_EXTERNAL,
since we can't easily depend on the order of packages before we can
derive the dependencies of libegl.
So, Arnout and I separately came up to the same conclusion: move the
dependency selection from out of libegl, and into each of the packages
that provides an EGL implementation. Here it is.
Since we no longer depend on the order packages are included, but on
values set at Kconfig-time, we can now have EGL providers in BR2_EXTERNAL.
Reported-by: David Corvoysier <david.corvoysier@orange.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
QtNfc is not installed since it is not supported on Linux.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are places in Qt's source where headers included with the name of
the module subdirectory (e.g. #include <QtCore/QHash>). Therefore, the
build system passes the top header directory to the compiler; but this
results in a error when building host tools since sysroot/usr/include
directory includes architecture specific system headers.
In order to prevent this, install all Qt headers into a subdirectory in
/usr/include.
Fixes: http://autobuild.buildroot.net/results/4f1/4f16c0b38bdd6e40efcc781c12fae81c0bfabb72/
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream did not release a new version of this package since it is
superseded by the builtin qml engine found in new qt5declarative.
Fixes: http://autobuild.buildroot.net/results/3861aa91e03154c7d20f4157f0c3a1fa14838af1/
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The following patch enables the generation of static libraries
additionally to the shared ones for the netsnmp package.
[Thomas: fixed commit log.]
Signed-off-by: Andreas Ehmanns <universeii@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
the static version of luac is enough
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding support for specifying multiple directories in
BR2_GLOBAL_PATCH_DIR. This will allow for a layered approach for the
patching of a package.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following the recent bump of gnutls to version 3.2.8, the build
started to fail on some machines where libopts is installed on the
system: gnutls configure script was incorrectly assuming that libopts
was available.
Since we don't have a package in Buildroot, this commit tells gnutls
to use its builtin libopts version.
Fixes (tested on gcc20):
http://autobuild.buildroot.org/results/18f/18f61b3be6aed73f83b449b5082492a4a6ba8ffb/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add largefile and thread dependencies, bump to version 2.1.4,
use upstream Git instead of Debian tarballs, adjust license
information]
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously, when cloning a Mercurial repository,
aborting the clone could (in some cases) leave behind an empty directory.
As a result, a later clone would fail.
Signed-off-by: Mathias De Maré <mathias.demare@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tab instead of spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tab instead of four spaces.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ffmpeg package generates libraries that are too large for the xtensa
default placement of literals in a dedicated section. Use
-mtext-section-literal to place literals in the text section.
Fixes
http://autobuild.buildroot.net/results/606/60670d35f16c3b8fe19debf7f8e40a046a579520/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes since 2.6.16:
* [FIX] redis-cli: fix big keys search when the key no longer exist.
* [FIX] Allow AUTH / PING when disconnected from slave with serve-stale-data on.
* [FIX] redis-benchmark: update help for new __rand_int__ form.
* [FIX] Fix broken rdbWriteRaw() return value check in rdb.c (harmless).
* [FIX] Log to what master a slave is going to connect to.
* [FIX] Only run the fast active expire cycle if master & enabled.
* [FIX] Fixed a replication bug involving 32 bit instances and big datasets
hard to compress that resulted into more than 2GB of RDB file sent.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed in [1], add comments to distinghuish shells from utilities in
the 'Shells and Utilities' menu.
[1] http://lists.busybox.net/pipermail/buildroot/2013-December/083836.html
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kmod-0001-Add-configure-check-for-_Static_assert.patch is already merged in
upstream.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pycrypto package contains a LICENSE.orig file, but apply-patches.sh
removes all .orig file, so we can't list a .orig file asa license file,
as it would have disapeared by the time 'make legal-info' sould be called.
Add a post-extract hook that renames this license file, so it is renamed
just before we apply patches and remove .orig files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 2746158497. This
commit is causing build issues when chfn/chsh are selected, due to bad
interactions with PAM. The initial submitter of the patch has agreed
to work on an improved version that fixes those problems, but in the
mean time, we revert this commit to prevent the problem from occuring
in the autobuilders.
Fixes:
http://autobuild.buildroot.org/results/820/8204008da6944923034fa17ecbcfefcf15373ee5/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The session external acl helper needs berkeleydb, switch to the basic
file_userip one which was my original intention (renamed from ip_user in
the 3.3.x series). Fixes:
http://autobuild.buildroot.net/results/635/6359137cde3b293d46df732836b8966d30f23cbc/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upgrade to latest security-related bugfixes release.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
New for 3.4 series:
* SSL Server Certificate Validator
* Multicast DNS
* Transaction Annotations
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This allows to compile gatttool which can help use Bluetooth Low Energy
devices.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
