The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
After switching to xorgproto the old xproto_* packages are removed.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Removed special handling for various xproto packages because xorgproto
always installs all available protocols.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Removed special dri2/dri3 handling because xorgproto always installs
dri3proto.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Removed dri3 handling because xorgproto always installs dri3proto.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Quoting initial release notes:
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
"This package combines the protocol headers, which were formerly
scattered in individual packages. At this point none of them are
changing rapidly enough to justify such fine granularity, particularly
when what changes do occur tend to affect multiple extensions at once
(Present and DRI3 for example). The individual protocols are still
installed as separate pkg-config modules, and consumers should continue
to use the per-protocol package version numbers."
Some xproto_* packages are host-packages so we need to add
host-autotools-package to this package as well.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update from 65b1c68 (2018-01-04) to 8d69bab (2018-07-17).
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot SPL configures pinmuxes, clocks and other low-level devices. On
the Xilinx ZynqMP SoCs the code to do this resides in a file called
psu_init_gpl.c which is initially generated by the Xilinx development
tools. Add an option to pass these files from the outside (e.g. in the
board files).
For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig using
BR2_TARGET_UBOOT_ZYNQMP_PSU_INIT_DIR. If it were in boot/uboot/ to be
applied unconditionally, it would break the build for configs using a
U-Boot version where the patch is already applied.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: add comment about U-Boot version requirements to use this
option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds support the Xilinx ZCU106 development board.
[Tested on the ES2 (Engineering Sample 2) version of the board]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order to boot on the Xilinx ZynqMP SoCs, U-Boot SPL requires a
recent PMU firmware loaded. Instruct U-Boot to add pmufw.bin to the
boot.bin file together with U-Boot SPL, and the boot ROM will load
both.
For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig that wishes to use
BR2_TARGET_UBOOT_ZYNQMP_PMUFW. If it were in boot/uboot/ to be applied
unconditionally, it would break the build for configs using a U-Boot
version higher than 2018.7-rc1 where the patch is already applied.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas:
- indicate that this feature requires U-Boot 2018.07, since commit
c7df098a71e05dc81cee818747759e8060b59626 is needed.
- define UBOOT_ZYNQMP_KCONFIG_PMUFW only once, and instead use a
variable named UBOOT_ZYNQMP_PMUFW_PATH to store the path to the PMU
firmware]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The postgresql package is now built with --with-libxml if
BR2_PACKAGE_LIBXML2 is selected to allow the use of XML functions in
postgresql.
Signed-off-by: Daniel Deterding <dde@innovaphone.com>
Signed-off-by: Thomas Ehrhardt <tehrhardt@innovaphone.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libostree has begun to use `gpg-error-config` in their configuration
script.
Point out gpg-error-config in staging dir to avoid using the one
installed on the host system.
Fixes:
http://autobuild.buildroot.net/results/447b96e449e881cf1bd9644cda0f386aa4c75724
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The pylibfdt in dtc is new since 1.4.5, and therefore built since the
bump from 1.4.4 to 1.4.7 in commit
7b929ddcf0. Unfortunately, this Python
support causes a number of build failures, be it for host-dtc or dtc.
Since this Python support is not used/needed by anything in Buildroot
at this point, let's simply disable it by passing NO_PYTHON=1. While
doing this, introduce DTC_MAKE_OPTS and HOST_DTC_MAKE_OPTS to avoid
duplicating the variables several times.
Fixes:
http://autobuild.buildroot.net/results/1ad41fd4890af0c97ee4ff2994ea5431b8953ef8/ (host-dtc)
http://autobuild.buildroot.net/results/0aefc3aa03a93b1fdf76f2d8946b6f423405382f/ (dtc)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the license as found in the actual source file, and remove the README
from _LICENSE_FILES as it does not contain anything regarding licenses.
Note that adding the source file as LICENSE_FILE means that the
corresponding hash will be different on every version bump.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The license of this package is not standard, it is a combination of two
sets of statements coming from two different authors.
The license resembles the original 4-clause BSD license (thus including
advertising clause) but without the third clause about endorsement.
The label 'BSD-4-Clause-like' nevertheless seems the closest match.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove patches now present upstream and drop no longer needed
autoreconf.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is needed for kernel 2.16.x compatiblity.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
