Commit Graph

1294 Commits

Author SHA1 Message Date
Marcus Hoffmann
b677a7bedb board/orangepi/orangepi-rk3399/genimage: fix partition types for gpt
Fixes the following error during image generation:
  ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid
  for mbr and hybrid partition-table-type

Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/2103784375

Signed-off-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-03-05 16:01:27 +01:00
Neal Frager
14b9a100ef configs/zynqmp_zcu10x: fix U-Boot dts config
Add a U-Boot config fragment to set the correct control device tree file for
each board, rather than using the default (zcu100).

Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Tested-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: reword commit message, rename fragment files]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-02-23 21:07:20 +01:00
Giulio Benetti
85ee640eb5 board/radxa/rockpi-n8:use partition-type-uuid for genimage-15
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:

ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type

[1] 1d72d8091f

So let's use for EFI System partition:
'partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
and for Root partition (32-bit ARM):
'partition-type-uuid = 69DAD710-2CE4-4E3C-B16C-21A1D49ABED3'

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717242

FTR, the magic UUID are from:
    https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-02-13 16:21:03 +01:00
Giulio Benetti
9dd5382d79 board/intel/galileo: fix build failure with host gcc 10
Building galileo_defconfig throws error:
```
/usr/bin/ld: arch/x86/tools/relocs_64.o:(.bss+0x0): multiple definition of `per_cpu_load_addr'; arch/x86/tools/relocs_32.o:(.bss+0x0): first defined here
```

To fix this let's add an upstreamed patch[1] and add BR2_GLOBAL_PATCH_DIR
to galileo_defconfig to point to where patch is.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=eeeda4cd06e828b331b15741a204ff9f5874d28d.patch

Fixes:
https://gitlab.com/ymorin/buildroot/-/jobs/2035821039

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-02-13 13:05:05 +01:00
Sergey Kuzminov
c0312f71cc configs/orangepi_zero_defconfig: switch to extlinux
Changes:
* Exclude FAT partition, it is no longer needed for U-Boot.
* Switch the rootfs partition from MBR to GPT for partition-uuid to work.
* Switch to extlinux, this is convenient for debugging.
* Create common scenarios for multiple boards to create an SD image:
  board/orangepi/common. Currently only orangepi_zero makes use of the
  common infrastructure.

Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: remove rootfs size = 63M and remount rw]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-02-12 23:09:09 +01:00
Giulio Benetti
92dc22dd68 board/pc: fix build failure due to new genimage 15
Actually genimage fails to create final image with:
```
ERROR: hdimage(disk.img): partition [MBR] (offset 0x1b8, size 0x48) overlaps previous partition boot (offset 0x0, size 0x200)
ERROR: hdimage(disk.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
```

This is because genimage 15 is less permissive than before, so let's add
holes = {"(440; 512)"} to leave room to MBR.

The generated image is identical to the image generated by the previous
version of genimage.

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1865935249

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-02-12 23:04:28 +01:00
Neal Frager
f1090b9e8c add configs/zynqmp_zcu102_defconfig
This patch:
- adds support for Xilinx ZCU102 evaluation board
- ZCU102 features can be found here:
https://www.xilinx.com/products/boards-and-kits/zcu102.html

Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: only build tested]
[Peter: use git describe for git hashes for clarity, add DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-02-12 14:43:33 +01:00
Neal Frager
4ade9cb1c1 configs/zynqmp_zcu106: bump ATF/U-Boot/Linux to Xilinx 2022
This patch:
- bumps ATF to Xilinx v2.6: mainline v2.6 requires patch to build
- bumps U-Boot to Xilinx 2022.01: important drivers not in mainline
- bumps Linux to Xilinx 5.15: important drivers not in mainline
- deletes board/zynqmp/patches directory: patches already in mainline
- modifies board/zynqmp/genimage.cfg: U-Boot 2022.01 uses u-boot.itb format
- adds extlinux.conf to vfat bootfs
- modifies U-Boot to unified xilinx_zynqmp_virt_defconfig (supports all boards)
- adds support for SPL pm_cfg_obj.c loading to PMU firmware
- enables support for host machines without OpenSSL required by U-Boot and Linux

Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: only build tested]
[Peter: use git describe for git hashes for clarity]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-02-12 14:43:32 +01:00
Heiko Thiery
ed5bbb7606 configs/kontron_bl_imx8mm_defconfig: new defconfig
The BL i.MX8M Mini is a baseboard that includes the SoM SL i.MX8M Mini.

https://www.kontron.com/produkte/baseboard-bl-i.mx8m-mini/p158549

Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: explicitly set BR2_cortex_a53=y]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-02-12 14:39:16 +01:00
Gilles Talis
9c78c8c0d7 configs/friendlyarm_nanopi_r2s: new defconfig
The NanoPi R2S is a FriendlyElec mini-router based on:

- Rockchip RK3328 SoC
- 1GB (or 2GB) DDR4 RAM
- Gigabit Ethernet (WAN)
- Gigabit Ethernet (USB3) (LAN)
- USB 2.0 Host Port
- MicroSD slot
- Reset button
- WAN - LAN - SYS LED

https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
[Arnout:
 - explicitly set BR2_cortex_a53=y;
 - remove unused mtools and dosfstools;
 - add BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y;
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-02-12 13:56:38 +01:00
Sergey Matyukevich
a778def2ac board/synopsys: remove outdated vdk boards
Remove outdated and unused aarch64 and archs38 Synopsys VDK boards.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-02-12 12:51:11 +01:00
Sergey Matyukevich
758a3dffd2 configs/snps_arc700_axs101: bump kernel and u-boot versions
Bump versions:
- use U-Boot 2022.01
- use Linux kernel v5.16

Add U-Boot configuration fragment increasing early malloc pool size.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-02-12 12:50:05 +01:00
Sergey Matyukevich
0f72e01e05 board/orangepi/orangepi-zero-plus2: fix build after genimage update
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type

To fix the first genimage error report, change 'partition-type' entries
to the appropriate 'partition-type-uuid'. Then genimage starts to
complain about overlaps:

ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.

To fix the second genimage error report, update the size of bootloader
file. Do not reserve additional space for GPT partition table since
new genimage is able to keep track of it.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478371

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-02-06 11:46:07 +01:00
Giulio Benetti
93532fb711 board/radxa/rockpi-n10: use partition-type-uuid in genimage.cfg
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:

ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type

[1] 1d72d8091f

So let's use for EFI System partition:
'partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
and for Root partition (64-bit ARM/AArch64):
'partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae'

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717241

FTR, the magic UUID are from:
    https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-02-06 10:31:53 +01:00
Giulio Benetti
c71c93aa76 board/radxa/rockpi-4: use partition-type-uuid in genimage.cfg
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:

ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type

[1] 1d72d8091f

So let's use for EFI System partition:
'partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
and for Root partition (64-bit ARM/AArch64):
'partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae'

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717240

FTR, the magic UUID are from:
    https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-02-06 10:31:46 +01:00
Giulio Benetti
2466a54281 board/pine64/rockpro64: use partition-type-uuid in genimage.cfg
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:

ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type

[1] 1d72d8091f

So let's use for EFI System partition:
'partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
and for Root partition (64-bit ARM/AArch64):
'partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae'

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717243

FTR, the magic UUID are from:
    https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-02-06 10:31:40 +01:00
Giulio Benetti
bd29ee0e8e board/friendlyarm/nanopi-m4: use partition-type-uuid in genimage.cfg
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:

ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type

[1] 1d72d8091f

So let's use for EFI System partition:
'partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
and for Root partition (64-bit ARM/AArch64):
'partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae'

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717059

FTR, the magic UUID are from:
    https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-02-06 10:31:34 +01:00
Giulio Benetti
7a9a74fc82 board/friendlyarm/nanopc-t4: use partition-type-uuid in genimage.cfg
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:

ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type

[1] 1d72d8091f

So let's use for EFI System partition:
'partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
and for Root partition (64-bit ARM/AArch64):
'partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae'

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717055

FTR, the magic UUID are from:
    https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-02-06 10:31:25 +01:00
Sergey Kuzminov
2a084afe2a configs/orangepi_zero_defconfig: refactoring, bump Linux and U-Boot versions
Changelog:
- Refactoring configs/orangepi_zero_defconfig.
- Linux: bump to version 5.15.16 (from 5.12.2).
- U-Boot: bump to version 2022.01 (from 2021.04).

Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by:  Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-02-01 22:58:55 +01:00
Giulio Benetti
3529e8c21c board/andes: fix build failure with host gcc >= 10
Add patch to fix linux bug:
```
  HOSTLD  scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
```

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478164

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-30 15:51:35 +01:00
Giulio Benetti
07a0d71657 board/orangepi/orangepi-rk3399/extlinux.conf: fix label name
RK3399_ROCKPRO64 has been picked from pine64/rockpro64 but here we deal
with orangepi-rk3399, so let's change the label to RK3399_ORANGEPI.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-26 22:05:18 +01:00
Peter Korsgaard
5803bbd900 configs/qemu_aarch64_virt_defconfig: linux.config: enable fb/input support
The Linux config already enabled drm-virtio for graphics output, but not the
corresponding virtio-input / evdev drivers for input or the compatibility fb
option.

Enable them so keyboard/mouse input works and /dev/fb0 is provided.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2022-01-22 20:08:41 +01:00
Heiko Thiery
ed380f62e0 board/kontron/pitx-imx8m: use extlinux instead of U-Boot boot script
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-22 15:07:23 +01:00
Romain Naour
04afe86cd7 board/qemu/arm-vexpress-tz: use enable=on
Since Qemu 6.0.0 [1], a warning appear in the log if a short-form
boolean option is used.

[1] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=ccd3b3b8112b670fdccf8a392b8419b173ffccb4

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2022-01-15 17:02:52 +01:00
Peter Seiderer
d7cf67fc94 board/raspberrypicm4io-64: enable RTC and USB overlays
The CM4 IO Board is equipped with an on-board RTC connected over I2C,
and has USB 2.0 host ports.

This commit loads the appropriate overlays to enable both. The USB 2.0
interface is by default disabled on CM4 to reduce the power
consumption so it needs to be explicitly enabled on the CM4 IO Board
to use the USB ports.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-13 23:12:11 +01:00
Peter Seiderer
31ed653166 board/raspberrypicm4io: enable RTC and USB overlays
The CM4 IO Board is equipped with an on-board RTC connected over I2C,
and has USB 2.0 host ports.

This commit loads the appropriate overlays to enable both. The USB 2.0
interface is by default disabled on CM4 to reduce the power
consumption so it needs to be explicitly enabled on the CM4 IO Board
to use the USB ports.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-13 23:10:56 +01:00
Sergey Kuzminov
6e68ec6de0 board/orangepi/orangepi-zero: using PARTUUID to identify root filesystem
The mmc block device number can vary, so passing a mmc block device to
specify the location of the rootfs is not a reliable
approach. Instead, use the root=PARTUUID=<uuid> mechanism, where the
uuid is found by U-Boot.

Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-13 22:09:54 +01:00
Julien Olivain
dc819438f6 board/spike/riscv64/start.sh: add buildroot host dir in PATH
commit 0d0f84d200
added the missing host-dtc dependency to riscv-isa-sim.

The spike simulator calls the dtc binary at its startup. The host dtc
command needs to be in the PATH at that time.

This commit add the buildroot host binary directory into the PATH of the
start.sh helper script. It make sure spike will use the buildroot dtc
version. This commit fixes this start.sh script on host not providing
the dtc command. Since the "spike" binary is now in the PATH, the
binary name is also simplified.

Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-13 20:38:49 +01:00
Julien Olivain
24d07fdc14 configs/spike_riscv64: new defconfig
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-11 22:58:52 +01:00
Fabio Estevam
350bddf7ef configs/mx6sx_udoo: bump U-Boot and kernel
Bump U-Boot to 2022.01 and kernel to 5.15.13.

After the conversion to U-Boot device model, the SD card is
device '1', so change the boot script accordingly.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-11 22:15:11 +01:00
Cédric Le Goater
8ac0775130 configs/qemu_ppc_bamboo: new defconfig
The Bamboo board is an evaluation board for PowerPC 440EP CPUs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-11 21:44:33 +01:00
Cédric Le Goater
7d914839a4 configs/qemu_ppc64le_powernv8: new defconfig
PowerNV is the platform using the OPAL [1] firmware on OpenPOWER
systems. OPAL first loads a kernel and an initramfs image based on
buildroot including a second boot loader petitboot [2]. The latter
does device discovery and kexecs a new Linux image from disk or
network.

QEMU implements PowerNV machines [3] for the POWER8, POWER9 and
Power10 processors which are used for dev and tests. POWER8 images
being compatible with POWER9 and Power10, simply add a single
qemu_ppc64le_powernv8 board for all.

The QEMU script boots directly from a nvme disk because it is simple
enough but a real system would boot from a ramfs first.

[1] https://github.com/open-power/skiboot/blob/master/doc/overview.rst
[2] https://github.com/open-power/petitboot/
[3] https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-11 21:37:28 +01:00
Giulio Benetti
220716ab67 configs/olimex_a20_olinuxino: fix mali not working because Linux version >= 4.20
Since on olinuxino_lime/lime2 we have a Linux version >= 4.20 we need to
pass drm_kms_helper.drm_leak_fbdev_smem=1 to kernel command-line that
really enables DRM_FBDEV_LEAK_PHYS_SMEM. CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM
only adds the code for this, but drm_leak_fbdev_smem is 0 by default, so we
need to override it with 1. Same goes for drm_fbdev_overalloc that
must be at least 200 for having a double buffer that is required by
Mali. This fixes both olimex_a20_olinuxino_lime and lime2 that use
extlinux.conf.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-08 21:56:55 +01:00
Masahiro Yamada
53d82096b6 qemu_arm_versatile_nommu: switch to in-kernel defconfig + fragment
This platform has its own kernel defconfig in Buildroot, but we cannot
get quick idea about how much it diverged from the in-kernel defconfig.

Let's use the upstream arch/arm/config/versatile_defconfig as a base,
and maintain the diff as a merge-config fragment. The same .config is
still generated based on the 5.10.7 kernel.

The diff is quite big, but this is a good start-point for cleanups.
Follow-up works can drop diff lines unless we find a good reason for
divergence.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[Arnout: rename linux-nommu.config to linux-nommu.fragment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-01-08 15:12:35 +01:00
Masahiro Yamada
34b725c412 qemu_arm_versatile: switch to in-kernel defconfig + fragment
This platform has its own kernel defconfig in Buildroot, but we cannot
get quick idea about how much it diverged from the in-kernel defconfig.

Let's use the upstream arch/arm/config/versatile_defconfig as a base,
and maintain the diff as a merge-config fragment. The same .config is
still generated (based on the 5.10.7 kernel).

The diff is quite big, but this is a good start-point for cleanups.
Follow-up works can drop diff lines unless we find a good reason for
divergence.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[Arnout: rename linux.config to linux.fragment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-01-08 15:12:35 +01:00
Giulio Benetti
8eec483760 board/olimex/a20_olinuxino: add linux-disable-lima.fragment
This Linux defconfig fragment is needed to disable Lima driver in favour of
Mali(if enabled). This because Lima is enabled by default in Linux's
sunxi_defconfig and if we enable Mali driver in Buildroot it will fail to
load. So let's set CONFIG_DRM_LIMA=n. Of course this fragment is only used
by Buildroot defconfigs that enable Mali driver.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-08 15:09:48 +01:00
Romain Naour
16d490d111 board/qemu/aarch64-sbsa: use partition-type-uuid for genimage-15
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:

ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type

[1] 1d72d8091f

Sync the genimage.cfg with the one used for aarch64_efi_defconfig

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717179
https://gitlab.com/buildroot.org/buildroot/-/jobs/1921792262

FTR, the magic UUID are from:
    https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Dick Olsson <hi@senzilla.io>
Cc: Pierre-Jean Texier <texier.pj2@gmail.com>
[yann.morin.1998@free.fr: add Wikipedia link]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2022-01-03 21:41:50 +01:00
Fabio Estevam
8af91d6c0c configs/imx6ulpico: bump U-Boot and kernel, switch to extlinux.conf
Current U-Boot is an old version and fails to build:

/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here

Bump U-Boot to fix the problem.

Latest U-Boot has switched to distro boot and SPL, so make the necessary
changes to support it. Other advantage of bumping U-Boot is that
it also supports the other imx6ul-pico variants.

While at it, also bump U-Boot to the 5.15 LTS.

Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006192

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-12-29 23:53:16 +01:00
Cédric Le Goater
cf494c78c1 configs/qemu_ppc_e500mc: enable dhcp on network interface
Add a virtio-net-pci device with a user mode host network backend

Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-12-28 22:14:55 +01:00
Cédric Le Goater
35ef82fe3b configs/qemu_ppc64_e5500: enable dhcp on network interface
Add a virtio-net-pci device with a user mode host network backend

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-12-28 22:14:52 +01:00
Eugen Hristev
444f6d22cc configs/microchip_sama7g5ek: new defconfigs
Add new defconfigs for sama7g5 evaluation kit.
Update README with new defconfigs.
Board uses linux 5.15 mainline.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-12-28 22:01:50 +01:00
Sergey Matyukevich
4e38f6a74a board/orangepi/orangepi-pc-plus: fix build after genimage update
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type

To fix the first genimage error report, change 'partition-type' entries
to the appropriate 'partition-type-uuid'. Then genimage starts to
complain about overlaps:

ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.

To fix the second genimage error report, update the size of bootloader
file. Do not reserve additional space for GPT partition table since
new genimage is able to keep track of it.

Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006300

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-12-27 21:05:44 +01:00
Michael Walle
5ba36c687b configs/kontron_smarc_sal28: move gpt between rcw and bootloader
genimage v15 complains about the GPT overlapping with the RCW. Move it
to offset 16k which is between the rcw (which isn't expected to grow
much more) and the bootloader.

This will fix the following error:
ERROR: hdimage(sdcard-emmc.img): partition [GPT array] (offset 0x400, size 0x4000) overlaps previous partition rcw (offset 0x1000, size 0x580)
ERROR: hdimage(sdcard-emmc.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-12-27 15:43:18 +01:00
Peter Korsgaard
b59f938302 board/*/genimage.cfg: use partition-table-type = "gpt" for genimage-15
Genimage 15 deprecated the gpt option and now prints a warning when it is
used:

INFO: hdimage(sdcard.img): The option 'gpt' is deprecated. Use 'partition-table-type' instead

So change the genimage configuration files to use that instead.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-12-27 15:41:51 +01:00
Peter Korsgaard
50963f8f2f board/orangepi/orangepi-r1/genimage.cfg: fix build after move to genimage 15
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1865935239

ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type

So change to partition-type-uuid instead.  With that fixed, genimage-15 then
also complains about the overlap between the u-boot partition and the GPT:

ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)

So adjust the u-boot partition to end just before the GPT.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-12-27 15:41:29 +01:00
Francois Perrad
47913a504b board/olimex/stmp1_olinuxino: add STMP157-OLinuXino-LIME2 board support
kernel & uboot come from Olimex forks

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-12-26 23:41:48 +01:00
Peter Korsgaard
b8aebcfd82 configs/roseapplypi_defconfig: bump kernel to 5.15.10
The kernel now has support for dma, ethernet, i2c, mmc, pinctrl, regulator,
so enable drivers for those, change to a ext4 rootfs and enable DHCP on
eth0.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-12-18 22:12:30 +01:00
Dagg Stompler
223085f671 boards/odroidc2: fix genimage execution
fix the following error:
ERROR: hdimage(sdcard.img): partition [MBR] (offset 0x1b8, size 0x48) overlaps previous partition bl1 (offset 0x0, size 0xc200)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.

which started at the genimage version bump to 15 commit.

Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1865935217
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-12-18 21:59:52 +01:00
Dario Binacchi
494807e28d configs/stm32f4{2|6}9_*_defconfig: rename configurations
Rename the configuration to explicitly distinguish between sd and xip.
As a result, the readme files have also been changed.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2021-12-17 22:58:12 +01:00
Dario Binacchi
c85312affd configs/stm32f429_disco: fix kernel bootup
The kernel generated by the configuration for the STM32f429-discovery
board is buggy:

Fixes:
 Unhandled exception: IPSR = 00000006 LR = fffffff1
 CPU: 0 PID: 1 Comm: init Not tainted 4.11.0 #2
 Hardware name: STM32 (Device Tree Support)
 task: 9041a000 task.stack: 907c0000
 PC is at ret_fast_syscall+0x2/0x4a
 LR is at tty_ioctl+0x1ad/0x75c
 pc : [<0800d942>]    lr : [<080c2e05>]    psr: 4000000b
 sp : 907c1fa8  ip : 0000001c  fp : 905961a2
 r10: 00000000  r9 : 907c0000  r8 : 0800dae0
 r7 : 00000036  r6 : 905e7e60  r5 : 00000000  r4 : 905e7ebc
 r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : 00000000
 xPSR: 4000000b
 CPU: 0 PID: 1 Comm: init Not tainted 4.11.0 #2
 Hardware name: STM32 (Device Tree Support)
 [<0800fbf9>] (unwind_backtrace) from [<0800f05b>] (show_stack+0xb/0xc)
 [<0800f05b>] (show_stack) from [<0800f553>] (__invalid_entry+0x4b/0x4c)

Inspired by commit a3e3d9c198 ("configs/stm32f469_disco_xip_defconfig:
alternative defconfig for XIP"), update the stm32f429_disco_defconfig
configuration to use a newer kernel. Current setup kernel + rootfs fits
in 1.6MB on-chip flash memory.

The kernel has been moved to new flash bank due to growth of dtb size.

Remove upstream patch.

For better binary size optimization gcc LTO is turned on.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2021-12-17 22:58:11 +01:00