Gcc bug 99140 exhibits with gcc versions:
- up to 7.x
- 9.x
- 10.x
and doesn't show up with gcc versions:
- 8.x
- 11.x
then moving BR2_TOOLCHAIN_GCC_AT_LEAST_9 to BR2_TOOLCHAIN_GCC_AT_LEAST_10
makes gcc version 9 set as working but it's not. So let's back substitute
BR2_TOOLCHAIN_GCC_AT_LEAST_10 with BR2_TOOLCHAIN_GCC_AT_LEAST_9.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Convert BR2_TOOLCHAIN_EXTERNAL_PATH to an absolute path when used.
Otherwise the symbolic links to the external toolchain binaries are
not installed in host/bin when BR2_TOOLCHAIN_EXTERNAL_PATH is relative.
This happens because TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER
changes directory into host/bin to create the symbolic links.
From there the tools are no longer found via the relative path and
a single symbolic link host/bin/$(prefix)-* is created instead.
Although relative paths sounds like something less than ideal to put in
a Buildroot configuration, it's actually rather typical to put the
buildroot sources as a submodule (or subdirectory) of custom sources
(either in a BR2_EXTERNAL or not), in which case the relative path is
well-defined.
Signed-off-by: Juergen Stuber <juergen@jstuber.net>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Gcc bug 99410 reappeared in gcc 10.x while building belle-sip, but it's
fixed on gcc 11.x, so let's update bug conditions.
Fixes:
http://autobuild.buildroot.net/results/846597f3573d3b0d52e80627a9577d14b9348547/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The OpenRISC toolchains have been rebuilt once again, this time with
the _REENTRANT fixed merged in commit
98e39dc80e ("package/gcc: define
_REENTRANT for OpenRISC when -pthread is passed")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In GCC6 the compiler was made smarter to omit the flag
-fdebug-prefix-map from the DWARF DW_AT_producer section[1]. That flag
contains the absolute path '$(BASE_DIR)' which breaks reproducibility.
Prior to GCC6 however, the only way to omit the flag is to use
-gno-record-gcc-switches which omits all flags.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=266cc0c181549c2fb6b50f8f26213cdc89101026
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
[Arnout: invert condition to ifeq (,) instead of ifneq (,y)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In GCC8 the flag -ffile-prefix-map handles cleaning up both the __FILE__
macros and the debug info paths. In GCC7 or below we are manually
handling the __FILE__ macros, but not debug info paths. Use
-fdebug-prefix-map to clean them up. This option exists since GCC 4.3.0,
which is our minimal supported GCC version.
See for more detail: https://reproducible-builds.org/docs/build-path/
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Bootlin toolchains for the OpenRISC architecture have been rebuilt
with the fix for binutils bug 28735, so let's update their definition
in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Binutils bug 21464 is not present anymore in Buildroot so let's remove it
and its depends on in libgeos and postgis packages.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following the releases of 2021.11 Bootlin toolchains, this commit
represents the result of re-running the gen-bootlin-toolchains script.
The only part that isn't auto-generated are the contents of
Config.in.legacy, which account for the replacement of the RISC-V LP64
toolchain by RISC-V LP64D toolchains.
The complete set of runtime test cases was verified on Gitlab CI:
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/437767674
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
`which' has been discontinued after 2.21 release in 2015 due this (git
repository is empty [1]) and version shipped in Debian produces warning
[2]:
/usr/bin/which: this version of `which' is deprecated; use `command -v' in scripts instead.
`command is POSIX [3] and supported on all common shells (bash, zsh,
dash, busybox sh, mksh).
Patch tested on dash as the default shell.
[1] https://git.savannah.gnu.org/cgit/which.git
[2] 3a8dd10b45
[3] https://pubs.opengroup.org/onlinepubs/9699919799/utilities/command.html
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The gdbinit supplied by Buildroot does two things:
A. specify the sysroot where gdb can find shared libraries
B. mark the sysroot as a 'safe path' for its auto-load feature, to make sure
that pretty printers for libstdc++.so are added automatically (see commit
6fb3216a80)
When debugging a core file, and the gdbinit file is specified via '-x'
rather than '-ix', then the order of these settings matters: If you first
set the sysroot, then gdb will immediately start finding the shared
libraries it needs for the core file, detect libstdc++ and its associated
libstdc++-gdb.py file, then give a big warning about safe paths:
warning: File ".../i686-buildroot-linux-gnu/sysroot/lib/libstdc++.so.6.0.24-gdb.py"
auto-loading has been declined by your `auto-load safe-path' set
to "$debugdir:$datadir/auto-load".
To enable execution of this file add
add-auto-load-safe-path .../i686-buildroot-linux-gnu/sysroot/lib/libstdc++.so.6.0.24-gdb.py
line to your configuration file "/home/me/.gdbinit".
To completely disable this security protection add
set auto-load safe-path /
line to your configuration file "/home/me/.gdbinit".
For more information about this security protection see the
"Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
info "(gdb)Auto-loading safe path"
and the pretty printing code is not loaded. This is because the second
line from the gdbinit file was not yet parsed at this point.
By changing the order (first configuring the safe path, then setting the
sysroot), this issue does not appear and everything is as expected.
Note that when '-ix' were used instead of '-x' to pass the gdbinit file to
gdb, then the order would not matter, because the entire gdbinit file would
be parsed before considering the core file.
However, even though the Buildroot manual now suggests '-ix', users may not
have noticed this change and continue to use '-x'.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to gcc 10.3, gdb 10.2, binutils 2.36.1, glibc 2.33.
Remove BR2_TOOLCHAIN_HAS_NATIVE_RPC since the support for obsolete
RPC was finally dropped in glibc in 2.32 (2020-08-04).
See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to gcc 10.3, gdb 10.2, binutils 2.36.1, glibc 2.33.
Remove BR2_TOOLCHAIN_HAS_NATIVE_RPC since the support for obsolete
RPC was finally dropped in glibc in 2.32 (2020-08-04).
See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Tested with qemu_aarch64_virt_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to gcc 10.3, gdb 10.2, binutils 2.36.1, glibc 2.33.
Remove BR2_TOOLCHAIN_HAS_NATIVE_RPC since the support for obsolete
RPC was finally dropped in glibc in 2.32 (2020-08-04).
See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Tested with qemu_arm_vexpress_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reorder gcc bugs by number
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some 3rd party vendor toolchains have multiple files which match
these glob patterns. In this case, the shell script failed.
Switching to use find and xargs solves the issue.
Signed-off-by: Jonah Petri <jonah@petri.us>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some 3rd party vendor toolchains have multiple files which match
these glob patterns. In this case, the shell script failed.
Switching to use find and xargs solves the issue.
Signed-off-by: Jonah Petri <jonah@petri.us>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Gcc bug 99140 has been fixed on gcc 8.x but reappeared on gcc 9.x while
it's been fixed on gcc 10.x+. So let's update
BR2_TOOLCHAIN_HAS_GCC_BUG_99140 accordingly.
Fixes:
http://autobuild.buildroot.net/results/c55/c55f50a8d657695f0d5492c32efa666254cd7f99/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bug has been fixed upstream and backported to buildroot binutils
package. So let's remove it from toolchain/Config.in and from packages
that are affected by it:
- libgeos
- postgis
- protobuf
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gdb can automatically load certain files as described in [1]. Such files
could install pretty-printers for complex data structures.
libstdcxx (C++ standard library) provided by gcc, is one example of a
library for which such auto-load file is available. But there are other
examples too, like libglib2.
However, gdb will only auto-load files if the file is located in one of the
locations treated as 'safe'. The Buildroot sysroot is not by default in that
list.
Provide a better debugging experience by adding the sysroot to the 'safe'
list, via the gdbinit file prepared by Buildroot.
[1] https://sourceware.org/gdb/onlinedocs/gdb/objfile_002dgdbdotext-file.html
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gcc installs a libstdcxx-...so-gdb.py file that gdb will load automatically
when it loads libstdcxx.so, via the mechanism described at [1].
However, the auto-load file installed by gcc contains hardcoded paths
referring to the location where the (external) toolchain was built, which
are normally not available.
Fix up the paths in the load file so that the pretty printers can be loaded
automatically.
Note that gdb will only auto-load the file if its location is marked as
'safe'. A subsequent commit will take care of that.
Technically, there could be more than one load file, e.g. in lib and
usr/lib, so fix them all. This was for example observed in
BR2_TOOLCHAIN_EXTERNAL_ARM_AARCH64.
In a very specific case with a local custom toolchain, there were actually
two 'python' directories, which would break the sed command, so arbitrarily
limit to the first one encountered.
[1] https://sourceware.org/gdb/onlinedocs/gdb/objfile_002dgdbdotext-file.html
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch allows to use an external toolchain based on gcc 11.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In order to add gcc 11 support for internal and external toolchain in
follow-up commits, introduce BR2_TOOLCHAIN_GCC_AT_LEAST_11 symbol.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
On Nios II binutils it still present ld bug 27597 leading to a package
libgeos to fail building:
c053b9e191/
The bug was already reported and it's been updated:
https://sourceware.org/bugzilla/show_bug.cgi?id=27597
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19615 and
BR2_TOOLCHAIN_HAS_BINUTILS_BUG_20006 options were last selected by the
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AMD64 toolchain, but this
toolchain has been removed as part of commit
d87e114a8f in August 2020.
It's time to get rid of those two options that are never enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The OpenRISC binutils is affected by a linker bug (binutils bug 21464)
for which no workaround exists. This causes build breakage in a number
of packages, so this commit introduces a
BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 option to identify this bug. As
all binutils versions are affected, this option is true whenever the
configuration targets OpenRISC.
The bug was already reported and it's been recently updated:
https://sourceware.org/bugzilla/show_bug.cgi?id=21464
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since gcc version 10.x bug 60620 doesn't show anymore, so let's make it
enabled up to versino 10.x excluded.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
