Add basic support for the roseapple pi board, a SBC in a RPI form factor
with an Actions Semiconductor S500 SoC. For details, see:
http://roseapplepi.org/
The vendor kernel unfortunately needs a minor patch to build the XHCI
driver, so include it here.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the first level bootloader for the Actions Semiconductor S500 SoC,
which is used on boards like Roseapple Pi and LeMaker Guitar.
The bootloader performs basic configuration and chain loads u-boot for
futher setup.
This bootloader is unfortunately only available as a binary blob. It gets
configured for a specific board using a binary (32bit x86) tool based on a
.ini file (somewhat similar to sunxi .fex).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsemanage is the only package depending on ustr, both packages do not
build using a musl-based toolchain, suggested by Thomas:
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/149138
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Suggested by Thomas:
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/149138
"getpwent_r() is a glibc-specific extension, so it will most likely not
be implemented by musl."
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch
0001-hidtest-dont-use-a-C-source-file-since-it-s-pure-C.patch in the
hidapi package needs to rename a file from .cpp to .c to avoid a
dependency on C++. This renaming currently uses the Git-way of
describing renames in patches. While this is interpreted properly by
recent enough versions of the 'patch' tool, it is ignored and not
understood by older versions of 'patch'. Due to this, with these older
versions of 'patch', the file is not renamed, and it causes a build
failure.
We fix this by not using the Git-like way of describing rename, but
rather using the old-style way of doing renames. It makes the patch
longer, but compatible with older versions of 'patch'.
Fixes:
http://autobuild.buildroot.org/results/d7509d9fdf8f86332a023358a740975f535eafef/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In static linking configurations, cups fails to build due to the lack of
Scrt1.o from uClibc toolchains. This Scrt1.o is only needed for PIE
binaries. Since we don't really care about PIE binaries in the context
of Buildroot, this commit solves the problem by patching cups to not
generate a PIE binary.
Fixes:
http://autobuild.buildroot.net/results/445a401da2f63a6c43d7c166516287db6cc977ab/
Cc: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building an U-Boot image for the i.MX23 or i.MX28 target requires to run the
bootloaders 'mxsimage' tool on the host. As mxsimage needs unconditionally
OpenSSL, building U-Boot for those targets fails if it is not available on
the host:
tools/mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directory
#include <openssl/evp.h>
Add the required dependency 'host-openssl' to all the different U-Boot image
types used to build a bootloader image for an i.MX23/i.MX28 target.
Also pass HOST_CFLAGS and HOST_LDFLAGS to the U-Boot build process so the right
-I/-L options will be used to find OpenSSL.
Ported from the Armadeus project:
https://sourceforge.net/p/armadeus/mailman/message/33595402/
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
[Jörg: port to recent Buildroot version]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As explained on http://www.gnu.org/prep/ftp.en.html, the network of
GNU mirrors provide a generic address, http://ftpmirror.gnu.org/,
which automatically redirects to an up-to-date and local mirror. This
allows to greatly speed-up downloads, and also reduces the load on the
main GNU server.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to some code imported from gnulib, the time package doesn't build
in static-only configurations. Indeed the gnulib code redefines the
error() and error_at_line() functions, which are also provided by the
C library. Since fixing the gnulib code is really difficult, let's
just disable this package for static-only builds.
Fixes:
http://autobuild.buildroot.org/results/a0e64faba69fa86755c693f575fb258a77e4e9d1/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit c45979c732 marked OProfile as not
available on the Xtensa architecture, due to the lack of memory
barrier operations. This commit does the same for the Microblaze
architecture, for the same reason, which allows to fix the following
autobuilder failure:
http://autobuild.buildroot.org/results/9a872ddc906e9d552d30762e849a1b537b4e5095/
It is worth mentioning that most likely Xtensa and Microblaze are
architectures implementing a strongly-ordered memory model, in which
case we could define the memory barriers as no-ops. But until someone
who actually cares about OProfile on Xtensa and Microblaze shows up,
it's probably better to disable the package on those architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The graph-build-time help text currently looks like this:
usage: graph-build-time [-h] [--type GRAPH_TYPE] [--order GRAPH_ORDER]
[--alternate-colors] [--input OUTPUT] --output OUTPUT
Obviously, naming the parameter for --input as OUTPUT is not a very
good idea, so this commit fixes that to name it "INPUT", as expected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Og (introduced in GCC 4.8) lets you optimize for debugging experience,
which can be useful for when you want optimized code that is nonetheless
debuggable.
Signed-off-by: Martin Kelly <martin@surround.io>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2015-7995 - Fix for type confusion in preprocessing attributes
Also drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use of a merged /usr is not restricted to systemd anymore, thus the
current error message is misleading, as it only speaks about systemd.
Fix the message by just ditching the reference to systemd altogether.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Amusingly, a fix made upstream to fix the build on Windows also fixes
the build with the musl C library.
Fixes:
http://autobuild.buildroot.net/results/d7b0cacc5d99d8dc91fdeaf770bb5d2b1b1975b6/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
strongswan uses the __atomic_*() intrinsics, so we make it depend on
BR2_TOOLCHAIN_HAS_ATOMIC and link with libatomic when available. This
allows to fix the build on SPARC, therefore fixing:
http://autobuild.buildroot.org/results/7e090237801874fb889c76f84863dc4c2ca20450/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-1856 - allows remote attackers to execute arbitrary code or
cause a denial of service (memory corruption) via a crafted web site
CVE-2016-1857 - allows remote attackers to execute arbitrary code or
cause a denial of service (memory corruption) via a crafted web site
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It turned out for quite some time CDN-powered mirror
of kernel.org is available. See this announce:
https://www.kernel.org/introducing-fastly-cdn.html
This change switches to that faster mirror by default.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Thomas: tweak the help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's normally autodetected, which can lead to unexpected/unhandled
results.
configure checks for libdrm, libepoxy and wayland, however a proper
libxcomposite check is missing thus it can lead to build failure under
some odd conditions.
There's no autobuilder failure to quote here, however there's a mailing
list post that exemplifies this:
http://lists.busybox.net/pipermail/buildroot/2016-May/161793.html
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current version of flann in Buildroot fails to build with gcc 6.x,
with the following failure:
error: call of overloaded 'abs(flann::KDTreeIndex<flann::L2<float> >::ElementType)' is ambiguous
By bumping the upstream version one commit further, we get an upstream
fix that fixes the build problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The aarch64 Linaro toolchain source hash is not correct, probably due
to a copy/paste error. The new hash has been verified by downloading
the tarball, validating the signature, and computing the hash.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-treq selects python-pyopenssl, which depends on C++ support, but
this dependency was not propagated to python-treq, causing the following
kconfig warning:
warning: (BR2_PACKAGE_PYTHON_TREQ) selects BR2_PACKAGE_PYTHON_PYOPENSSL which has unmet direct dependencies ((BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3) && BR2_INSTALL_LIBSTDCPP)
This commit fixes that by adding the appropriate dependency.
Cc: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: add Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-service-identity selects python-pyopenssl and python-pyasn, both
of which depend on C++ support, but this dependency was not propagated
to python-service-identity causing the following kconfig warning:
warning: (BR2_PACKAGE_PYTHON_SERVICE_IDENTITY) selects BR2_PACKAGE_PYTHON_PYOPENSSL which has unmet direct dependencies ((BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3) && BR2_INSTALL_LIBSTDCPP)
warning: (BR2_PACKAGE_PYTHON_SERVICE_IDENTITY) selects BR2_PACKAGE_PYTHON_PYASN which has unmet direct dependencies ((BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3) && BR2_INSTALL_LIBSTDCPP)
warning: (BR2_PACKAGE_PYTHON_SERVICE_IDENTITY) selects BR2_PACKAGE_PYTHON_PYASN_MODULES which has unmet direct dependencies ((BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3) && BR2_INSTALL_LIBSTDCPP)
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: add Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
midori selects webkitgtk, and webkitgtk needs a glibc toolchain, but
midori did not propagate this dependency, causing the following kconfig
warning:
warning: (BR2_PACKAGE_MIDORI) selects BR2_PACKAGE_WEBKITGTK which has unmet direct dependencies (BR2_INSTALL_LIBSTDCPP && BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 && BR2_TOOLCHAIN_USES_GLIBC && BR2_PACKAGE_LIBGTK3 && BR2_PACKAGE_WEBKITGTK_ARCH_SUPPORTS)
Interestingly, the Config.in comment of the midori package already
mentionned the (e)glibc dependency, but the BR2_TOOLCHAIN_USES_GLIBC
dependency was not expressed (either on the comment or on the main
package option itself).
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
aircrack-ng has some scripts (airmon-ng, airmon-zc) that use external
tools for their functionality. We don't select the corresponding
packages because some of the other aircrack-ng tools don't need these
at all.
Still, the user should be informed of this. So update the help text to
refer to all packages used by the scripts:
- ethtool
- iw
- rfkill
- util-linux for lspci and lsusb (script uses options not available in
busybox)
- wireless_tools for iwconfig and iwpriv
See also bug #8936
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: lipkegu@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated here [1], recent changes on the MIPS binutils sources have
made it necessary for GCC to pass the -msoft-float to the assembler. Due
to that, valgrind fails to build for MIPS soft-float when using a
version of binutils >= 2.25 because its using some hard-float
instructions.
However, we cannot just disable it for the soft-float and binutils >=
2.25 combination since external toolchains don't provide information
about the binutils version they use. So, instead, we simply disable it
for soft-float.
1: https://gcc.gnu.org/ml/gcc-patches/2014-08/msg00905.html
Fixes:
http://autobuild.buildroot.net/results/5f5/5f576c7f8d56058a19ed0e7ff4b1ec620bcafb65/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's --enable-glx rather than --enable-egl, both are automatic though.
Change the autoreconf comment to reflect that it's required for all
patches.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the makedev syntax documentation, one of the examples lacks the "mode"
value. This patch fixes that example.
Signed-off-by: Alan Yaniger <alan@tkos.co.il>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Don't enable SSP support on external toolchains just because they use
glibc or musl. Instead of that, make the external toolchains explictily
declare if they support SSP or not. And also add a check to detect SSP
support when using custom external toolchains.
For internal toolchains we always enable SSP support for glibc and musl.
Fixes:
http://autobuild.buildroot.net/results/ac7c9b3ad2e52abfe6b79a80045e4218eeb87175/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
- remove uClibc-specific SSP check, since there is now a generic
check being done.
- send potential compilation errors caused by the SSP check to
oblivion, in order to avoid causing confusion for the user.
- add autobuilder reference.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain still use binutils 2.25 without the fix for PR19405.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
