systemd is increasingly expecting things to live in /usr/bin, /usr/sbin
or /usr/lib nad not in /bin, /sbin or /lib. It has inherited those
expectations from a Fedora change:
https://fedoraproject.org/wiki/Features/UsrMove
Note however, that systemd does support /usr being on a separate
filesystem; it just expects an initramfs to mount it before the final
switchroot over to the actual rootfs.
But the traditional use-case for Buildroot is not to boot with an
initramfs; although that is totally feasible, that's probably not what
is commonly done in the vast majority of cases.
However, a lot of packages still install stuff directly into /bin,
/sbin or /lib, which systemd may need early-on in the boot process,
even before it may have a chance to mount /usr. Even though we can
tell systemd, at configure-time, where it should expect programs to
be at runtime, it does not make sense to go head-first against an
upstream wa^Hill.
Add an option so that /bin, /sbin and /lib be symlinks to /usr/bin
and /usr/sbin. That option is forcibly enabled when the init system
is systemd.
Note: we need not handle /lib32 or /lib64, as they already are symlinks
to /lib, which means they will automatically be redirected to /usr/lib,
as /usr/lib32 and /usr/lib64 already are.
Furthermore, this means we're no longer supporting a split-usr setup, so
the corresponding configure options have been removed as well for
systemd and, when using a merged /usr, for eudev as well.
In Buildroot, we decided (with this patch) not to support a split-usr
when systemd is used as an init system. This is a design decision, not
a systemd issue. Thus the select is with BR2_INIT_SYSTEMD rather than
with BR2_PACKAGE_SYSTEMD.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Tested-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix indent and put PATH on a single line.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's a lot of code in /etc/profile, which doesn't really belong in a
minimal default skeleton.
Also, add an 'unset i' to avoid clutter.
If the user has a specific needs, it needs to be added in
/etc/profile.d/ by a post-build script.
Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "Dynamic using mdev" and "Dynamic using eudev" /dev management
methods are using devtmpfs, just like "Dynamic using devtmpfs only",
on top of which they add either mdev or eudev. But their names might
suggest they use mdev only or eudev only.
Clarify their descriptions by adding "devtmpfs +" to make it
unambiguous.
[Thomas: rewrap the paragraphs in the manual. It makes the diff a lot
less readable, but we actually want the result to be wrapped.]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
/dev/shm is needed for systems using shared memory. On init-based systems
this directory is usually created in the inittab along with /dev/pts, by
the lines:
package/busybox/inittab:
::sysinit:/bin/mkdir -p /dev/pts
::sysinit:/bin/mkdir -p /dev/shm
package/sysvinit/inittab:
si2::sysinit:/bin/mkdir -p /dev/pts
si3::sysinit:/bin/mkdir -p /dev/shm
However this is broken when static /dev management is selected and the root
filesystem is read-only, showing during boot the error:
mkdir: can't create directory '/dev/shm': Read-only file system
Fix it by creating the empty /dev/shm directory, just like /dev/pts.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Making the getty option a menuconfig instead of a simple config
automatically moves its dependees into a menu without the need to
manually declare such a menu.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The comment line that explains that systemd needs a glibc toolchain and
kernel headers >= 3.10 doesn't fit in the dialog box, which makes it
look as if headers >= 3.1 are needed.
Abbreviate the comment a little by removing an 'an'. It still doesn't
fit completely (only one trailing * is shown), but at least it's
readable.
While we're at it, change the quoting style to " like we always use.
Reported-by: eschu on IRC
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Create a proper package for the skeleton.
The main Makefile is modified to remove the skeleton support.
The 'dirs' target, will create the $(TARGET_DIR).
The file 'output/target/.root' doesn't exists anymore, as there's no
Make rule to statisfy.
The infrastructure are modified to filter host-skeleton.
It's needed becauses the host-dependencies are derived from the
dependencies of the target package where 'host-' is preprended to the
depedency name.
In the pkg-generic we add skeleton as a dependency to every package.
The whole system/system.mk is now removed at the profit of
package/skeleton/skeleton.mk
[Thomas:
- rebase on top of master and fix some minor conflicts
- remove the 'select BR2_PACKAGE_SKELETON' in
BR2_ROOTFS_SKELETON_DEFAULT and BR2_ROOTFS_SKELETON_CUSTOM, since
anyway the skeleton package is always enabled.
- fixup a few mistakes in the getty handling due to misnamed
variables.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following the introduction of the initscripts package in commit
89d39fc7a3 ("initscripts: new package"),
the /etc/inittab file is no longer part of the skeleton, and therefore
is not always installed.
However, system/system.mk tweaks the inittab for getty and filesystem
remount as rw, without taking the precautions of whether the init
system is Busybox or SysV. This commit fixes that by adding the
necessary conditions around the code adjusting the inittab file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The folder init.d is currently installed by default since it's part of
our skeleton.
This patch creates a package out of it and make busybox/sysvinit depends
on it.
This way, if you chose another init, you don't end up with a useless
init.d folder.
[Thomas:
- make the initscripts package selectable via a hidden bool
- remove some unneeded changes in sysvinit.mk.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add /etc/profile.d/locale.sh script from Arch Linux to /etc/profile.
This script looks for locale.conf, sources it, and exports the LANG and
LC_* variables.
[Arnout: put in /etc/profile in the skeleton rather than making it
systemd specific.]
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
securetty is supposed to restrict the terminals root is allowed to
login from. As it happens, login from busybox (w/ securetty support)
is actually enforcing use of securetty, while login from util-linux
is completely ignoring securetty altogether.
Remove securetty from our skeleton altogether and stop worrying about
it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A random-seed from a read-only filesystem is useless.
Also, drop the check for /etc/random-seed existence; it must exist after a
touch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Seeding the entropy pool with a known seed makes more harm than good. This is
especially bad for when /etc is not on a persistent writable storage, so the
entropy pool is seeded with the same value on every boot. Just drop it.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, there are only two possibilities regarding the root account:
- it is enabled with no password (the default)
- it is enabled, using a clear-text, user-provided password
This is deemed insufficient in many cases, especially when the .config
file has to be published (e.g. for the GPL compliance, or any other
reason.).
Fix that in two ways:
- add a boolean option that allows/disallows root login altogether,
which defaults to 'y' to keep backward compatibility;
- accept already-encoded passwords, which we recognise as starting
with either of $1$, $5$ or $6$ (resp. for md5, sha256 or sha512).
Signed-off-by: Lorenzo M. Catucci <lorenzo@sancho.ccd.uniroma2.it>
[yann.morin.1998@free.fr:
- don't add a choice to select between clear-text/encoded password,
use a single prompt;
- differentiate in the password hook itself;
- rewrite parts of the help entry;
- rewrite and expand the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Lorenzo M. Catucci" <lorenzo@sancho.ccd.uniroma2.it>
Acked-by: "Lorenzo M. Catucci" <lorenzo@sancho.ccd.uniroma2.it>
Tested-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These are not used by the busybox or Debian ifupdown implementation. Instead
if-up.d is run after the per-interface up tasks (E.G. post-up) and
if-down.d is run before the per-interface down tasks (E.G. pre-down).
So drop them as they only cause confusion.
grep execute_all output/build/busybox-1.23.2/networking/ifupdown.c
static int execute_all(struct interface_defn_t *ifd, const char *opt)
if (!execute_all(iface, "pre-up")) return 0;
if (!execute_all(iface, "up")) return 0;
if (!execute_all(iface, "down")) return 0;
if (!execute_all(iface, "post-down")) return 0;
grep execute_script output/build/ifupdown-0.7.49/execute.c
int execute_scripts(interface_defn * ifd, execfn * exec, char *opt)
if (!execute_scripts(iface, doit, "pre-up"))
if (!execute_scripts(iface, doit, "up"))
if (!execute_scripts(iface, doit, "down"))
if (!execute_scripts(iface, doit, "post-down"))
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The symlink created by buildroot for /bin/sh is the full path to
a shell. This does not match what busybox and other Linux
distributions do with using relative path symlinks. When handling
files on the host system this will point to the host system's shell
if present and not the target shell.
This is fixed by changing the /bin/sh symlink to use a relative path.
Fixes#8161.
[Thomas: minor fixups to the commit log suggested by Yann E. Morin.]
Signed-off-by: Matthew Starr <mstarr@hedonline.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The option is a non-option now and will be removed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using busybox compiled from current git, login emits the following
message:
login: /etc/group: bad record
Fix it by adding the missing colon to /etc/group in system/skeleton.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For clarity, this commit renames the TARGETS variable to the more
meaningful PACKAGES variable. Indeed, only packages (handled by one of
the package infrastructures) should be listed in this variable, and
not other random non-package targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
DES is long dead, it is insecure as hell, and virtually all known
crypt(3) implementations now all support at least md5.
Besides, the character-space of DES-encoded passwords are a sub-set
of the character-space for a clear-text password, so we can't easily
differentiate between the two. Since we're going to change the root
password prompt to support setting encoded passwords (as well as
clear-text passwords), we can't keep DES or we'd be unable to decide
whether we'd need to encode the password or not.
Remove DES encoding altogether (and add a legacy entry). The default is
still md5, and thus there's no backward-compatibility 'select' to add.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Lorenzo Catucci <lorenzo@sancho.ccd.uniroma2.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the buildroot toolchain non-largefile support option since it's
being removed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- indicate upstream commit id, as suggested by Baruch.
- add SoB of Alexey inside the patch itself.
- adjust sequence number to 0003.]
Signed-off-by: Alexey Mednyy <swexru@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch sets the default timezone to UTC if not overwritten.
Some packages need a configured system timezone for properly
operating like mono based software.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Making /var/run and /run symlinks to /tmp is bad since the underlying
tmpfs filesystem is mode 1777 which leads to possible security attack
vectors via badly owned/mask-mode pidfiles and state files residing there.
So make /run a proper directory with /var/run symlinked to it.
Eventually all startup scripts and state info should be pointed to /run
directly as per the linux fhs and good practice.
Add a tmpfs filesystem entry for /run so that busybox inittab, systemv
inittab and systemd automount mounts it there to avoid breaking the
system.
While at it fix inconsistent spacing in /etc/fstab by using tabs and
drop the "static file system information" header whatever that means.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch allows the setup of simple a single interface to be
automatically brought up and configured via DHCP on system startup.
The interface name can be set via a configuration option. This patch
does not support systemd-networkd, any complex network configuration should
be done via overlay of /etc/network/interfaces or the relevant networkd
configuration file
[Peter: rename to BR2_SYSTEM_DHCP, tweak help text & implementation]
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script checks for linux/btrfs.h which is only available since
3.9 (55e301fd57a6239ec: Btrfs: move fs/btrfs/ioctl.h to
include/uapi/linux/btrfs.h).
It now also uses static_assert which is only available since GCC 4.6, so
handle it as well in the legacy patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make the S40network script create the /run/network directory for the
debian variant of ifupdown which uses it as a lock directory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We used to specify explicitly serial port with all its settings
for init to instantiate getty.
This limits usecases when the same one rootfs could be used.
For example following cases won't work well with hardcoded
serial console settings:
* On the same board other serial port is expected to be used
* The same rootfs is intended to be used on different boards with
different serial ports (like ttySx vs ttyAMAx or even ttyx)
With this change by default we rely on "console" specified in
kernel's boot command line.
What is important getty will be set on the last console
specified in bootargs.
For example is a kernel comand line:
--->---
bootargs="... console=tty0 console=ttyS3,115200n8..."
--->---
This now will instantiate serial console on ttyS3 but not on tty0.
Tested with both Busybox and SysV init.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Drop null id since that means "don't show anything" for busybox init,
hence the shutdown sequence (/etc/init.d/rcK) doesn't show anything
giving the false impression that it's not being run.
If someone wants a really silent console they'll need to adjust much more than
this anyway.
Also swap the root read-only remount with swapoff since the swap can be
a regular (loop) file in the root filesystem and make the operation fail
resulting in a dirty filesystem.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel headers minimum version for systemd was bumped to 3.8
(IFLA_GRE_FLOWINFO and IFLA_IPTUN_FLAGS definitions) and then to 3.10
(IFLA_VLAN_PROTOCOL definition). However, systemd since version v215
contains the following patch that defines IFLA_* constants if
needed:
81577dc missing.h: add various network enums
http://cgit.freedesktop.org/systemd/systemd/commit/?id=81577dc
As a consequence, this patch downgrades the kernel headers minimum
version to linux 3.7 which is required for BPF_XOR.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
They're obsolete and the package was removed way back in 2010.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It has no counterpart in passwd so it's basically a NOP.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It has no counterpart in passwd so it's basically a NOP.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It has no counterpart in passwd so it's basically a NOP.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Non-login users shouldn't have a valid shell so drop it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
AFAIK no package uses it and even if it did it would belong there.
And it's not a standard user either.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
AFAIK no package uses it and even if it did it would belong there.
And it's not a standard user either.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sshd privilege drop user doesn't belong in the skeleton, it's
exclusively used by OpenSSH.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It belongs to the package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We dropped the hal package quite some time ago, and it's not even a
properly created user.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
They all depend on having a custom busybox config and/or fully featured
utilities which depend on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even if the main shell is bash /etc/profile is also parsed so it's
redundant.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
That directory has been unused for ages so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Don't blindly install the /etc/nsswitch.conf file, it's useless for
toolchains that aren't (e)glibc-based and misleading.
Make the installation conditional on a (e)glibc toolchain.
[Thomas: use $(INSTALL) instead of cp.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update inittabs (skeleton/busybox & sysvinit) to remove the trailing
REMOUNT_ROOTFS_RW comment used as magic string in system/system.mk to
enable/disable remounting the root filesystem rw or not since it affects
sysvinit in doing so properly as reported in bug #7442.
Instead update the sed expressions to match clean non-commented strings
by searching for "-o remount,rw /" and checking that's the end of the
line as well to avoid affecting possibly other remounts that a user can
have in a custom inittab.
Long-term the startup block of inittab should just move to a S00sysinit
script or similar so that rcS can pick it up directly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Not all our shells do install a pointer to /bin/sh. Besides, between
those that do and multiple ones are enabled, the last one to install
wins the the symlink.
Add a new config choice in the system sub-menu that allows the user to
explicitly select the shell to provide /bin/sh. If busybox is not
enabled, default to using dash, a POSIX shell.
Remove the symlink creation from bash.mk at the same time.
Note: for every shell, we select them, except busybox, on which we
depend, on the assumption that we do not want to force busybox in case
the user decided not to enable it.
[Peter: remove redundant !BR2_PACKAGE_BUSYBOX dependency]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow time zone setup and installation for configurations
using custom skeletons as well as default skeletons.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We define the two groups 'nobody' and 'nogroup' in our skeleton, but
they have the same gid, which is not valid.
This breaks the mkuser script, as noticed by Thomas.
Anyway, the user 'nobody' belongs to the group 'nogroup' in any sane
distribution.
So, just remove the spurious 'nobody' group.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Convert "system.mk" recipes to "target-finalize" hooks in order to:
- Ensure an ordering even if top-level parallel make is being used.
- Execute "system.mk" commands after the "target-finalize" initial message
is printed so they can be clearly distinguished from packages
building.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
User "default" with no password has been around for long time, but not
used within buildroot. Since we now have BR2_ROOTFS_USERS_TABLES it is
no longer needed.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix minor spelling errors that exists in system/Config.in
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A new entry has been added to the "System Configuration" menu to allow
the user to set the location of additional user tables (besides the ones
defined in packages).
A user table is a text file, formatted using the mkusers syntax, which
describes the users on the target system, with their UID/GID, home
directory, password, etc.
The target root file system will be populated according the content of
these files.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[yann.morin.1998@free.fr: use plural TABLES; we need to remove the
intermediate users_table file, as it is no longer generated in
one shot, in case a previous run failed and did not remove it]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: strip quotes/use local TZDATA_LOCALTIME variable]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[alexandre.belloni: move from "tzdata" to "system configuration"]
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[yann.morin.1998@free.fr: move into the BR2_TARGET_TZ_INFO conditionnal block]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Systemd only supports the architectures defined in
src/shared/architecture.h. So via a new parameter named
BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS, we enable the build of this package
only for those architectures.
Fixes http://autobuild.buildroot.net/results/bcc/bcce95eb0748505c0d62db21a6e420aae3c3181b/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Systemd requires at least Linux headers 3.0 because it uses:
- setns(2) syscall, introduced in 3.0.
- IFLA_GROUP from if_link.h, introduced in 2.6.39.
Fixes http://autobuild.buildroot.net/results/098/09866da023d527b3c228a98f1fde104e780e1883/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop old custom CDROM devices from the device table, these are x86-only
and really really old so it would be amazing these would be in working
order.
And they haven't been supported in linux for while.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libblkid library in util-linux uses fork. While it seems
potentially possible to disable the parts of the library that use fork
(the only parts using fork are parts related to LVM and Device Mapper,
which are said to be legacy as they are replaced by sysfs based
scanning, instead of having to fork to run a separate process).
However, since libblkid is used by:
- e2fsprogs, which uses lots of fork all over the place
- udev, which most likely will also need fork
There is not much point in making libblkid fork-less. As a
consequence, this commit makes util-linux/libblkid unavailable on
non-MMU architectures, and propagates the relevant dependency to the
reverse dependencies of libblkid.
This fixes the e2fsprogs build failure seen on Blackfin. The failure
was due to a configure test of e2fsprogs which was trying to link a
small test program against libblkid, which failed because there was an
undefined reference to fork() in the libblkid code.
Fixes:
http://autobuild.buildroot.net/results/ee2c1568d16ac040011dd4d6d8b543ff9e9e2622/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ramfs (which is used instead of tmpfs if CONFIG_SHMEM isn't enabled in the
kernel configuration), defaults to mode 0755 instead of 01777 like tmpfs
uses.
/tmp should be world writable and sticky, so explictly enforce the mode so
ramfs users gets it correct instead of relying on the defaults.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps systemd to v207 but also declares it as a provider for the
udev virtual package.
Starting with systemd 183, udev has been merged into
systemd. The udev daemon is now installed as /lib/systemd/systemd-udevd.
This means that /dev management using udev is only available if systemd
is chosen as init system.
When configuring systemd, the following options are available:
- activation of systemd-journal-gatewayd, to access the journal via
HTTP.
- activation of extra features like journal compression and sealing.
Support for uClibc has also been removed because:
- upstream has no interest in supporting uClibc.
- using a shrinked libc brings no advantage, given the size of all the
programs included in Systemd. So using glibc does not matter.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch converts udev to a virtual package. For the moment, there is only
one provider for the udev features: eudev.
Packages meant to provide udev-like features must select the symbol
BR2_PACKAGE_HAS_UDEV.
Packages depending on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV or
BR2_PACKAGE_UDEV have been converted to use the new symbol.
[Peter: move legacy symbols under 2014.05]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
eudev is a userspace device management daemon. It is a standalone
version, independent from systemd. It is a fork maintained by Gentoo.
Features:
- No extra configuration options are available: Gudev is build if
libglib2 is selected.
- No dependency on hwdata as the package uses its own hardware
database (as does systemd).
eudev 1.3 is in sync with systemd v207.
[Peter: add BR2_USE_MMU dependency]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
warning: (BR2_INIT_SYSV) selects BR2_PACKAGE_SYSVINIT which has unmet direct
dependencies (BR2_PACKAGE_BUSYBOX_SHOW_OTHERS && BR2_INIT_SYSV)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A custom skeleton may include /etc/issue and/or /etc/hostname, in
which case we do not want to override them.
But those files could also be missing from the custom skeleton, or
the user may want to override their content.
Update the documentation to make it clear that the user can set these to the
empty string to make buildroot not create/overwrite these files.
[Peter: drop the different default values depending on skeleton]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
[yann.morin.1998@free.fr: change from hiding it behind SKELETON_DEFAULT
to use conditional default values; move below the skeleton choice;
improve help entries]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add /dev/hvc* devices, and add them to securetty. These
are required for ppc64 virtual consoles.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udev requires the epoll_create1 system call, which is not available on avr32.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following whitespace problems in Config.in files:
- trailing whitespace
- spaces instead of tabs for indentation
- help text not indented with tab + 2 spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option to choose init system was below the one for /dev management.
As Systemd forces the use of udev, it is logical to swap them.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since debug uart on imx6 sabreauto board is ttymxc3.
Signed-off-by: Abdul Hussain <hussain.abdul@outlook.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This update adds IP protocols created in the last 20 years.
Signed-off-by: Peter Sanford <psanford@nearbuysystems.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed on the list, devtmpfs is quite a bit nicer default than
the old static /dev, so change it.
Notice that you NEED to enable CONFIG_DEVTMPFS / CONFIG_DEVTMPFS_MOUNT
in the kernel configuration if you manually build a kernel outside
buildroot, otherwise the rootfs won't work.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit introduces a specific BR2_TARGET_GENERIC_GETTY configuration flag.
This eliminates the need for checking if BR2_TARGET_GENERIC_GETTY_PORT is an
empty string or not. It also allows hiding various getty options when getty
isn't enabled.
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since kmod 14, the support for building a static library has been
removed completely from kmod. Therefore, we mark kmod as
!BR2_PREFER_STATIC_LIB, as well as all its reverse dependencies, which
includes the option to use the "udev" /dev management method.
[Peter: show comment for udev when BR2_PREFER_STATIC_LIB is enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the addition of root password setting support in buildroot, there have
been a few bug reports in this area ([1], [2]). In these cases, the system
mkpasswd did either not work, or did not provide the options we expect, like
-m <method>.
This patch adds a mkpasswd host package, based on the sources from whois. When
a non-empty root password is set, this package is used as a dependency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[1] http://lists.busybox.net/pipermail/buildroot/2013-July/075771.html
[2] http://lists.busybox.net/pipermail/buildroot/2013-July/075869.html
[Thomas P: use $(INSTALL) instead of install, put -lcrypt at the end
of build command line to allow gcc to find the crypt() function in
lcrypt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
udev-182 requires several groups to be resolvable at udev startup,
including disk, cdrom, floppy, tape, audio, video, lp, tty, dialout,
and kmem. Only some of these are in the default skeleton's group
file, So let's add the missing groups, and plugdev too.
This avoids getting these logs in /var/logs/messages:
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'dialout' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'kmem' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'video' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'lp' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'floppy' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'cdrom' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'tape' unknown
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It can be useful to have different configuration use the same post-build
and/or post-image scripts as they share a common infrastructure, but yet
have minor differentiation.
This option allows passing zero or more additional arguments to each
post-build or post-image script.
The same set of extra arguments are passed to all scripts, it is not
possible to pass different arguments to each script.
[Peter: fix help text, post-image gets called with the images dir]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upon logging, dropbear whines if /root is group- or others-writable, and
key-based authentication is attempted, reverting to password-based
authentication:
dropbear[149]: /root must be owned by user or root, and not writable by others
dropbear[149]: Password auth succeeded for 'root' from 192.168.127.35:41566
On my system, /root was 770. Changing to 700 fixed the issue.
Having /root 700 is a good idea, anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already provide BR2_TARGET_GENERIC_HOSTNAME to set /etc/hostname,
so a default /etc/hostname file isn't needed.
More importantly, if the user has explictly set BR2_TARGET_GENERIC_HOSTNAME
to the empty string, we would still end up with a /etc/hostname containing
'buildroot' which is unlikely to be what the user wanted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, /home/default is mode 2755 which means it is setgid.
Since /home/default is not group-writable, it is useless.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We ran into a "Login incorrect" problem when running the same rootfs
image across platforms with different loging ports ttyS0/1/2/3.
Simply assignning "console" to BR2_TARGET_GENERIC_GETTY_PORT, which in
turn modifies the /etc/inittab, is not enough because the "console" device
was missing in the /etc/securetty.
While current securetty has enumerated a lot of ttys, this patch should save
some efforts to enumerate more.
[Peter: guard with single quotes]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adding ttyPS0 and ttyPS1 to securetty for Zynq.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the post-image config option uses the plural for "Custom
scripts", do the same for the post-build config option, for
consistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just like we have a post-build script mechanism that gets executed
after the build of all packages but before the creation of the
filesystem images, let's introduce a post-image script mechanism, that
gets executed once all filesystem images have been generated.
This can for example be used to call a tool building a firmware image
from different images generated by Buildroot, or automatically extract
the tarball root filesystem image into some location exported by NFS,
or any other custom action.
[Peter: fix image script check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The filesystem overlay is a tree that is copied over the target fs
after building everything - which is currently usually done in the
post-build script.
[Peter: don't ignore missing directories]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Passwords can be encoded in different ways (from the weakest
to the strongest): des, md5, sha-256, sha-512
Add a choice entry to select the method, defaulting to 'md5'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In case one is using a custom skeleton, the root pasword might already be
set in this case, and should not be overriden.
Just ask for (and set) the root password only for the default skeleton.
Reported-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some systems, you don't want to run any getty, so allow the option
to be disabled when the empty string is used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add an option in the menuconfig to specify a root password.
If set to empty, no root password is created; otherwise, the password is
encrypted using MD5 (MD5 is not the default for crypt(3), DES-56 is, but
MD5 is widely available, not-so-strong, but not-so-weak either).
Add a check for 'mkpasswd' as a new dependency.
[Peter: fix typo/capitilization and simplify logic]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This option is useful for cases where the terminal isn't a bare serial
vt100, but e.g. a linux tty with more features.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Toolchain Linaro 2012_09 and possibly other glibc based ones
rely on the existence of nsswitch.conf. If it's missing names
from /etc/hosts are not resolved and thus "localhost" is not
known.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The /var/www directory is listed in /etc/passwd in the skeleton target
filesystem as the home directory of the www-data user (uid 33).
In the final target filesystem, /var/www should be owned by www-data. This
is important for the lighttpd package, for example.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to solve
http://autobuild.buildroot.org/results/34f6843137efda20626af72714c110280ec577d7/build-end.log,
this patch makes the D-Bus package as well as all the packages that
select the D-Bus package 'depends on BR2_USE_MMU'.
In addition, for the specific case of gvfs, the missing
BR2_TOOLCHAIN_HAS_THREADS dependency is added (threads are required by
D-Bus, so they are also required by gvfs which selects D-Bus).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Using severals post build scripts is usefull to share
script between severals boards/projects.
[Peter: fix trailing spaces in Config.in]
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This directory groups the following elements:
* the default root filesystem skeleton
* the default device tables
* the Config.in options for system configuration (UART port for
getty, system hostname, etc.)
* the make rules to apply the system configuration options
Even though the skeleton and device tables could have lived in fs/, it
would have been strange to have the UART, system hostname and other
related options into fs/. A new system/ directory makes more sense.
As a consequence, this patch also removes target/Makefile.in, which
has become useless in the process.
[Peter: fixup TARGET_SKELETON settings / documentation to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
