When the fis and gadgetfs-test packages were removed, their respective
options in Config.in.legacy were placed before the "Legacy options
removed in 2020.02", while they should have been placed after. Let's
fix that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, a user sets a policy version via the refpolicy package.
Having the option here has a few disadvantages:
- The Refpolicy package is not technically needed to use SELinux.
- When building a modular policy, Refpolicy will ignore the version string
and build the highest version possible which will cause libsemanage to
possibly fail when loading the policy.
Specifying a manual policy version in /etc/selinux/semanage.conf
forces libsemanage to load a specific policy version, which fixes the
above issue. However, because refpolicy currently defines the policy
version, libsemanage does not have a way to determine the policy
version, as refpolicy is not a dependency of libsemanage.
To work around these limitations, move the policy version number
selection to libsepol, as a system using SELinux always requires this
library.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove gadgetfs-test as gadgetfs has been deprecated in favour of
functionfs.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Remove fis as RedBoot hasn't been updated for over 10 years.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Remove celt051 package as celt has been merged into the IETF Opus codec
and is now obsolete (see http://celt-codec.org/).
The only reverse dependency of celt051 is spice. Opus support on spice
has been added upstream 6 years ago with:
ce9b714137
Spice disabled celt by default since version 0.14.1 and:
72b0d603e1
Spice evens error out, by default, if Opus is missing but not explicitly
disabeld since:
f522473842
This will also fix a static build failure on spice with celt051 and opus.
Fixes:
- http://autobuild.buildroot.org/results/96c786f85d35f33508e9c71778043d16b87f72cd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: slight rephrasing in legacy help]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With the kernel support for WireGuard getting mainlined, the upstream repo
has been split in a wireguard-tools repo for the userspace tooling and
wireguard-linux-compat for the kernel side (for 3.10+ legacy kernels).
Add a wireguard-linux-compat for the compatibility out-of-tree kernel
module, and update the Config.in.legacy handling to use it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With the kernel support for WireGuard getting mainlined, the upstream repo
has been split in a wireguard-tools repo for the userspace tooling and
wireguard-linux-compat for the kernel side (for 3.10+ legacy kernels).
So rename the package to wireguard-tools, use the new upstream and drop the
kernel module handling.
Also add Config.in.legacy handling for existing users.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Net::Ping is a Perl core module (ie. bundled with perl)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
MIME::Base64 is a Perl core module (ie. bundled with perl)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Digest::MD5 is a Perl core module (ie. bundled with perl)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package was a dependency to ejabberd-18.09. It is not anymore
use by any package nor maintain upstream, so remove it.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 5.3.x series is now EOL so remove the option and add legacy
handling for it.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Scapy3k is deprecated since Scapy supports Python 3. Scapy should be
used instead.
See https://bugs.busybox.net/show_bug.cgi?id=12376
Signed-off-by: Gabriel Potter <gabriel@potter.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that binutils 2.33.1 has been introduced, and we have moved to
2.32 as the default version, it is time to drop support for binutils
2.30.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2be4232d98 removed the config option for openvmtools' procps
support, but forgot to add it to the legacy menu.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The upstream Alljoyn project is dead since the AllSeen
Alliance merged with the Open Connectivity Foundation
back in 2016. No other package depends on Alljoyn, so
it can be removed.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[Peter: fixup legacy option text]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch extends the "copy extra GCC libraries to target" feature to
also work for internal toolchains. The variable has been renamed to be
BR2_TOOLCHAIN_EXTRA_LIBS and the configuration option moved under the
generic toolchain package. For external toolchains, the step that does
the copy is still in the copy_toolchain_lib_root() helper which copies
from the sysroot to the target. For the internal toolchain, the host
gcc-final package does a post install hook to copy the libraries from
the toolchain build folders to both the sysroot and target(!static).
Examples where this can be useful is for adding debug libraries to the
target like the GCC libsanitizer (libasan/liblsan/...).
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The package was renamed to snmpclitools and is no longer maintained.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 5.2.x series is now EOL so remove the option and add legacy
handling for it.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The RISCV Proxy Kernel (AKA BBL) isn't being used by most distros so has
very limited testing. It has been replaced by OpenSBI and been
deprecated for awhile, so let's just remove it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Release notes: https://www.sqlite.org/releaselog/3_30_0.html
Changed Config.in option from stat3 to stat4
https://www.sqlite.org/compile.html#enable_stat3
"This option used to cause the ANALYZE command to collect index
histogram data in the sqlite_stat3 table. But that functionality was
superceded by SQLITE_ENABLE_STAT4 as of SQLite version 3.8.1
(2013-10-17). The SQLITE_ENABLE_STAT3 compile-time option continued to
be supported through version 3.29.0 (2019-07-10) but has now become a
no-op."
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 5.1.x series is now EOL and 5.3.x has been added, so remove the option
and add legacy handling for it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It was here just for backwards compatibility and is not used by any
package or board after commits
59856480b6 packages/devmem2: remove from all board configurations
2f6e3eae55 package/ti-gfx: do not use devmem2 in script
There are address casting issues with 32bit access on a 64bit bus (like
on the SoC FPGA ARM processors) with this tool. The Busybox version of
devmem is the most up to date and supports quadword access.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=10171
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package was only used by libsemanage, but it is no longer used
since SELinux 2.7, so drop it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package is incompatible with Kodi 18.x, configure is broken:
CMake Error at output/host/x86_64-buildroot-linux-uclibc/sysroot/usr/share/kodi/cmake/AddonHelpers.cmake:197 (message):
"@ADDON_DEPENDS@" not found in addon.xml.in.
This package is also not part of the upstream binary repo:
https://github.com/xbmc/repo-binary-addons
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package is incompatible with Kodi 18.x, configure is broken:
CMake Error at output/host/x86_64-buildroot-linux-uclibc/sysroot/usr/share/kodi/cmake/AddonHelpers.cmake:197 (message):
"@ADDON_DEPENDS@" not found in addon.xml.in.
For details read PR 2857 of https://github.com/LibreELEC/LibreELEC.tv
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package is incompatible with Kodi 18.x, configure is broken:
CMake Error at output/host/x86_64-buildroot-linux-uclibc/sysroot/usr/share/kodi/cmake/AddonHelpers.cmake:197 (message):
"@ADDON_DEPENDS@" not found in addon.xml.in.
This package is also not part of the upstream binary repo:
https://github.com/xbmc/repo-binary-addons
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The meson build system now check if dri swrast is enabled
when OSMesa classic is enabled.
See:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=cbbd5bb889a2c271a504c379f36a7cb717a85af4
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This option is renamed in order to match the naming used by the
meson buildsystem.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
After hostapd update to 2.9, the patch provided no longer works,
although applies. Moreover, AP support for Realtek chips is broken
anyway in kernels > 4.9.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
[Thomas: add Config.in.legacy handling]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the ts4800_defconfig has been removed, the ts4800-mrboot package
is no longer useful, therefore we drop it.
Cc: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc 9.1 is around, gcc 8.3 is the default version, so drop
6.5 in order to reduce the gcc choice.
Keep gcc 5.5 since it still used by beaglebone_qt5_defconfig.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to reduce the number of choice in gcc selection, remove the
gcc 4.9 version.
This version was kept due to libstdc++ ABI-incompatible changes and
other build issues with kernel and bootloader as reported by Arnout
[1].
Since then, gcc 4.9 is not supported any more since glibc 2.29 [2]
and recent kernel and bootloaders has been fixed to use more recent
compiler version.
[1] http://lists.busybox.net/pipermail/buildroot/2017-June/194374.html
[2] https://www.sourceware.org/ml/libc-alpha/2019-01/msg00723.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gdb 7.12.1 was released on 21 Jan 2017 [1] and is the last version that
doesn't requires a C++11 compiler. Since Buildroot now support three other
gdb versions (8.1, 8.2 and 8.3), reduce the number of choice by dropping
7.12.1.
Remove BR2_PACKAGE_GDB_NEEDS_CXX11 symbol since it's not useful
anymore.
[1] https://lists.gnu.org/archive/html/info-gnu/2017-01/msg00009.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 5.0.x series is now EOL and vulnerable to the "TCP SACK PANIC" issue.
Drop support for it in linux-headers.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit b3bba8e425 (package/linux-headers: drop support 4.20 headers)
removed the option for 4.20.x kernel headers, but forgot to add a legacy
option. Add that now.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
8.3 is around and 8.2 is the default version, so drop
8.0. Keep 7.12 which is the latest version that doesn't
requires C++11 support.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
VDSP is C-SKY enhanced extension instruction set for SIMD, AI and DSP
operation. It is supported by abiv2, used by the ck807, ck810, ck860
cores.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Thomas: update help text in Config.in.legacy about the BR2_CSKY_DSP
option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The DSP extention is in fact no longer used for C-SKY, nor supported
by C-SKY gcc, so we remove it.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Thomas: split from the VDSP patch, add Config.in.legacy]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
