The python and python3 builds mark libpython as read-only which
prevents it from being stripped out correctly for the target.
Signed-off-by: Przemyslaw Wrzos <przemyslaw.wrzos@calyptech.com>
Acked-by: Thomas De Schampheleire <thomas.de_schampheleire@alcatel-lucent.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@alcatel-lucent.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: bump to 2.1.2 instead of 0.8, remove comment that no longer
made sense about setuptools being forked.]
Signed-off-by: Rohan Fletcher <rohfledev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we are going to bump setuptools to a much newer version, the host
python needs to be built with support for unicodedata.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, Python external modules were only visible when Python 2.x
was selected. With this commit, we now source all the Config.in files
of Python external modules, as soon as one of the two Python
interpreters is enabled.
Since all Python external modules have a "depends on
BR2_PACKAGE_PYTHON" in their Config.in, this commit in practice does
not allow to enable any Python external module. However, thanks to
this, we can progressively and safely enable more and more Python
external modules to build with Python 3, by simply changing their
dependency to "depends on BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit improves the Python package infrastructure to allow Python
packages to be built with Python 3. The changes are fairly simple:
* Use either PYTHON_PATH or PYTHON3_PATH as the PYTHONPATH depending
on which Python is used.
* Depend on host-python or host-python3 and python or python3
depending on which Python is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Python package infrastructure will need the Python 3 package to
provide a PYTHON3_PATH environment variable in order to build
third-party Python modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps the Python3 package to use Python 3.4.0rc1.
About the patches:
* The patches below 100 are significantly changed, because like for
Python 2.x, a good number of improvements have been made in the
upstream Python for cross-compilation. Therefore, almost all of
these patches have been modified.
* All the patches above 100 are simply updated for Python 3.4.0, with
a small refactoring for the handling of test modules.
The details of the python3.mk changes are:
* --without-ensurepip to tell Python to not use PIP at build time.
* Many environment variables are no longer passed, they were specific
to our cross-compilation patches
* The fixup of the LIBDIR in the Python Makefile is no longer needed
since Python has switched to _sysconfigdata.py for distutils
configuration instead of parsing the Makefile.
* A new post patch hooks touches the two files generated by pgen to
make sure they are newer than the pgen sources, which ensures pgen
is not built/executed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some parts of python3.mk were hardcoding the 3.3 version as the major
version, which does not work for Python 3.4 and other future
versions. Instead, use the existing PYTHON3_VERSION_MAJOR.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host python always had --disable-unicodedata, regardless of the
corresponding configuration option BR2_PACKAGE_PYTHON_UNICODEDATA.
Since the host python is used to byte-compile python modules, this meant
that such modules could not contain unicode strings. For example, following
statement in a python module:
print u"\N{SOLIDUS}"
would cause the byte-compilation to fail with message:
SyntaxError: ("(unicode error) \\N escapes not supported (can't load
unicodedata module)",
Instead, conditionally disable unicodedata based on
BR2_PACKAGE_PYTHON_UNICODEDATA, also for the host python.
This fixes bug #6542 (https://bugs.busybox.net/show_bug.cgi?id=6542)
Reported-by: Gernot Vormayr <gvormayr@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The target python3 depends on host-python3, but most of the scripts
call "python", so we need to ensure that $(HOST_DIR)/usr/bin/python
exists. This patch achieves this by creating a python -> python3
symbolic link in $(HOST_DIR), just like we are already doing for the
target Python 3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Buildroot, we do not support installing both Python 2.x and Python
3.x on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thanks to the previous commit that makes distutilscross unecessary for
setuptools packages, the host-distutilscross package can now be
removed. There is no need for any Config.in.legacy handling, since
there is no target variant, or visible Config.in option for
host-distutilscross.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thanks to the bump of Python 2.x, distutilscross is no longer needed
to achieve cross-compilation for setuptools packages. The host Python
2.x interpreter can be tricked into using the target compiler thanks
to pointing it to a different sysconfigdata module, which is achieved
using PYTHON_PATH.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Transmission would incorrectly determine the C++ compiler when ccache is
enabled, causing a build with uTP to fail at the configure step.
This patch adds a patch against transmission, fixing the problem.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If BR2_PACKAGE_QT_STATIC is set, qtuio will not build a .so file, but .a.
However, the custom INSTALL_TARGET_CMDS and INSTALL_STAGING_CMDS
unconditionally attempted to copy the .so file.
This commit checks the requested Qt library type and copies the right
library for each case, taking into account that the static .a file does not
need to be copied to the target directory.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If Lua support is requested in VLC, its configure script tries to find the
luac byte compiler, which fails if host-lua is not yet built.
This can be easily reproduced by setting a minimal config with vlc and Lua
enabled, and running: 'make clean toolchain vlc'. Final output is:
checking for LUA... no
configure: WARNING: Package lua5.2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `lua5.2.pc'
to the PKG_CONFIG_PATH environment variable
No package 'lua5.2' found, trying lua 5.1 instead
checking for LUA... no
configure: WARNING: Package lua5.1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `lua5.1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'lua5.1' found, trying lua >= 5.1 instead
checking for LUA... yes
checking for luac... no
configure: error: Could not find the LUA byte compiler.
make: *** [<buildroot>/output/build/vlc-2.1.2/.stamp_configured] Error 1
Fix this problem by setting host-lua as a dependency to vlc.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It does not make much sense enabling opencv without its core module.
This configuration leads to build nothing (since all modules depend on
the core one), but install the configuration files (*.pc and *.cmake)
anyway.
This absurd situation may break the build-system of other packages
that would correctly find the *.pc (but does not check for the modules
they actually use), but would not build because of missing headers and
libraries.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
jimtcl tries to use 'ccache' (a non-buildroot host version) which may not
exist on the host system. If ccache is enabled in buildroot, the compiler
used by jimtcl is:
ccache <buildroot>/.../ccache <buildroot>/.../<tuple>-gcc
If ccache is not present on the host, this results in the build error:
ccache <buildroot>/.../ccache <buildroot>/.../<tuple>-gcc
-D_GNU_SOURCE -Wall -I. -fpic -pipe -Os -c -o jim-subcmd.o jim-subcmd.c
make[1]: ccache: Command not found
This patch passes 'CCACHE=none' to the 'configure' script, disabling the
internal handling of ccache, so that ccache can be transparently passed
through CC.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The expanded SED variable already contains -e, so the extra -e was being
interpreted as the sed command and causing sed to fail.
Signed-off-by: Ivan Sergeev <vsergeev@kumunetworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thanks to the Python 2.x bump, it is no longer needed to pass
PYTHONCPREFIX, and CROSS_COMPILING when building third-party Python
modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though jumping from 2.7.3 to 2.7.6 looks like a minor version
bump, it is in fact a fairly significant one, because a good number of
changes to help cross-compilation have been merged into Python
upstream. Therefore, most of our patches are affected by this change.
In detail, this commit:
* Renames all the patches to follow the naming convention of patches
in Buildroot: the patch file names should not have any version
number.
* The patches numbered above 100, that add configuration options to
disable certain modules of the Python standard library, are only
renamed and slightly adapted, they didn't change that much.
* The patches numbered below 100 are almost entirely rewritten: many
of the cross-compilation problems that used to exist in Python
2.7.3 no longer exist, and the number of remaining problems is
smaller, and can be fixed with smaller patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the upcoming bump of Python 2.x, it will become important that
the PYTHONPATH is passed whenever we build third-party packages, be
they using the distutils build mechanism, or the setuptools build
mechanism. This is because passing PYTHONPATH is what will allow
Python to find a special Python module that contains all the
compiler/library/headers definitions that are relevant when
cross-compiling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the Python package exposes its PYTHON_PATH variable, we can
use it in the package infrastructure. This prepares both the upcoming
bump of Python 2.x, and the introduction of Python 3 support in the
Python package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As a preparation to make the Python infrastructure support both Python
and Python 3, as well as the bump of Python 2 and 3, we need the
Python package to expose the Python module path in a variable called
PYTHON_PATH. It will be used by the following commits.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The three typical packages that use .config files in buildroot copy the
config file at different times in the build process:
busybox copies its .config from the post-extract hook.
linux copies its .config in the configure_cmds.
uclibc copies its .config from the post-patch hook.
Copying the .config file from the configure step is the only way to properly
support an OVERRIDE_SRCDIR that does not yet have the .config file, because
the extract and patch steps are skipped in that case.
In a previous patch, the situation was already fixed for busybox. This patch
applies the same fix to uclibc: copy the config file from the configure
step, as linux is doing.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The three typical packages that use .config files in buildroot copy the
config file at different times in the build process:
busybox copies its .config from the post-extract hook.
linux copies its .config in the configure_cmds.
uclibc copies its .config from the post-patch hook.
Copying the .config file from the configure step is the only way to properly
support an OVERRIDE_SRCDIR that does not yet have the .config file, because
the extract and patch steps are skipped in that case.
For example, when setting a BUSYBOX_OVERRIDE_SRCDIR to a cleanly extracted
busybox tarball:
$ make busybox-dirclean busybox
rm -Rf [..]/output/build/busybox-custom
>>> busybox custom Syncing from source dir
>>> /home/tdescham/repo/contrib/busybox-1.21.1
rsync -au --exclude .svn --exclude .git --exclude .hg --exclude .bzr
--exclude CVS /home/tdescham/repo/contrib/busybox-1.21.1/
[..]/output/build/busybox-custom
>>> busybox custom Configuring
/bin/sed -i -e "/\\<CONFIG_NOMMU\\>/d"
[..]/output/build/busybox-custom/.config
/bin/sed: can't read [..]/output/build/busybox-custom/.config:
No such file or directory
make: *** [[..]/output/build/busybox-custom/.stamp_configured] Error 2
This patch modifies busybox.mk to copy the config file from the configure
step instead, as linux is doing, and fixing the described scenario.
This fixes bug #5030: https://bugs.busybox.net/show_bug.cgi?id=5030
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch consolidates the URLs for various Freescale-supplied
packages to use FREESCALE_IMX_SITE.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be sure that host-autoconf dependency is already built move the
call to autogen.sh from SDL_POST_PATCH_HOOKS to SDL_PRE_CONFIGURE_HOOKS.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add '+' prefix to the $($(PKG)_BUILD_CMDS) and $($(PKG)_INSTALL*_CMDS)
commands to enable jobserver for the sub-make.
Without the '+' prefix GNU make does not detect the sub-make so it
disable the jobserver for the sub-make.
>From GNU make documentation:
Using the MAKE variable has the same effect as using a ‘+’ character
at the beginning of the recipe line. This special feature is only
enabled if the MAKE variable appears directly in the recipe: it does
not apply if the MAKE variable is referenced through expansion of
another variable. In the latter case you must use the ‘+’ token to get
these special effects.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be able to use top-level parallel make we must not depend in a rule
on the order of evaluation of the prerequisites, so instead of relying
on the left to right ordering of evaluation of the prerequisites add
an explicit rule to describe the dependencies.
We cannot use the pattern rules because they must have the same
dependency for every package, but we need to change the dependencies
depending on $(2)_OVERRIDE_SRCDIR variable value, so we must use a
more flexible way like $(2)_TARGET_% variables.
So add explicit dependencies for the following stamp files:
$(2)_TARGET_EXTRACT
$(2)_TARGET_PATCH
$(2)_TARGET_CONFIGURE
$(2)_TARGET_BUILD
$(2)_TARGET_INSTALL_STAGING
$(2)_TARGET_INSTALL_TARGET
$(2)_TARGET_INSTALL_IMAGES
$(2)_TARGET_INSTALL_HOST
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit makes the dependency from the target toolchain explicit.
This way we can buid from command line a package that use
inner-generic-package right after the configuration phase, example:
make clean <package-name>
Also remove TARGETS_ALL because the only purpose was to add toolchain
dependency so it's superseded by this commit.
To prevent circular dependency add the new variable
<pkgname>_ADD_TOOLCHAIN_DEPENDENCY to avoid adding the toolchain
dependency for toolchain packages.
This is also a step forward supporting top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move "dependencies" "dirs" "prepare" dependencies from "toolchain" to
every package.
This way we can build correctly every package right after the clean
stage.
As example with this commit we can build successfully the glibc right
after the clean stage:
make clean glibc
This is also a step forward supporting top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we are changing the default dbus user, make sure this user is
consistently created.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: add to existing _CONF_OPT line as suggested by Yann]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change the download source to a Github repository which is more recent.
This patch also bump libatomic_ops version and remove a patch that is
now upstream.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
glibc 2.19 has been released recently
(https://sourceware.org/ml/libc-alpha/2014-02/msg00224.html). This
commit allows to build a toolchain with this new version. In order to
allow this, we add a version selection that did not exist for
glibc. We default to 2.18, which was the only supported version until
now, and add an option for 2.19.
For microblaze, which uses a specific glibc version, the version
selection choice is not displayed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 262a4c0bf7.
Compiler error has been fixed, and building this package doesn't cause an
ICE anymore.
Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the build of systemd is broken with the internal toolchain
backend, because we have uClibc patches that add support for
execvpe(), but we also have a patch for systemd that adds execvpe(),
which was added when the internal uClibc didn't support execvpe().
However, simply dropping the patch is not a solution, as it would
break the build of systemd with any other uClibc than the ones built
with Buildroot. For example, a Crosstool-NG uClibc toolchain would
fail.
Beyond this execvpe() problem, there are also other problems that
prevented systemd from being built with unpatched uClibc.
This patch does the following:
* Add sequence numbers of systemd patches.
* Regenerate them to avoid fuzz.
* Improve the uClibc compatibility patch so that it:
- Detects whether execvpe() is available or not, and if not
available provide an implementation.
- Detects if dup3() is available or not, and if not available
provide an implementation.
- Detects if MSG_CMSG_CLOEXEC is defined or not, and if not, define
it to the appropriate value.
This has been tested with uClibc internal toolchain, uClibc external
toolchain built with Buildroot, uClibc external toolchain built with
Crosstool-NG, and glibc external toolchain.
Fixes bug #6776.
Fixes:
http://autobuild.buildroot.org/results/591/591c6055430da334bd1e46e7d01497add45da837/build-end.loghttp://autobuild.buildroot.org/results/e58/e5851939d2837d4e35a4c1d9ca6df3c93ed5a34b/build-end.loghttp://autobuild.buildroot.org/results/92e/92e4c40c69a3feb4046b2fe5a0d8c69d5a44a157/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps systemd to v207 but also declares it as a provider for the
udev virtual package.
Starting with systemd 183, udev has been merged into
systemd. The udev daemon is now installed as /lib/systemd/systemd-udevd.
This means that /dev management using udev is only available if systemd
is chosen as init system.
When configuring systemd, the following options are available:
- activation of systemd-journal-gatewayd, to access the journal via
HTTP.
- activation of extra features like journal compression and sealing.
Support for uClibc has also been removed because:
- upstream has no interest in supporting uClibc.
- using a shrinked libc brings no advantage, given the size of all the
programs included in Systemd. So using glibc does not matter.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch converts udev to a virtual package. For the moment, there is only
one provider for the udev features: eudev.
Packages meant to provide udev-like features must select the symbol
BR2_PACKAGE_HAS_UDEV.
Packages depending on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV or
BR2_PACKAGE_UDEV have been converted to use the new symbol.
[Peter: move legacy symbols under 2014.05]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
eudev is a userspace device management daemon. It is a standalone
version, independent from systemd. It is a fork maintained by Gentoo.
Features:
- No extra configuration options are available: Gudev is build if
libglib2 is selected.
- No dependency on hwdata as the package uses its own hardware
database (as does systemd).
eudev 1.3 is in sync with systemd v207.
[Peter: add BR2_USE_MMU dependency]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the e-mail address buildroot@buildroot.org is now enabled, update the
e-mail addresses in the source tree from @uclibc.org and @busybox.net to our
own proper domain.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable elfutils for avr32, because:
- elfutils uses canonicalize_file_name, which came after uClibc-0.9.31.
- avr32 uses a toolchain with uClibc-0.9.31
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adjust phpize and php-config to make them work for cross-compiled
external extensions.
While at it also fix dl* issues that prevent said extensions from
loading.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch that commit a728e2fe35 (coreutils: fix build against uclibc
snapshot) adds mentions the wrong coreutils version in its description.
Also fix the sign-of tag while at it.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The xtensa port uses __xtensa_libgcc_window_spill in libgcc to implement
__builtin_frame_address. This symbol is local/hidden in libgcc. This is not a
problem when linking against static libgcc. But g++ defaults to
-shared-libgcc, thus breaking link against C++ shared libraries that are using
__builtin_frame_address as follows:
ld: test: hidden symbol `__xtensa_libgcc_window_spill' in .../libgcc.a(lib2funcs.o) is referenced by DSO
Add upstream patches that make libgcc_s.so a linker script that links in
unresolved symbols from the static libgcc, similar to the ARM and PowerPC
ports.
Fixes:
http://autobuild.buildroot.net/results/e2d/e2d1a763fa86b8575e2e48e6d73c018175f43e7c/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc development version adds support for POSIX spawn routines. However,
unlike glibc these routines are in librt. This breaks gnulib autoconf
detection. Teach gnulib autoconf to look for POSIX spawn in librt.
Fixes:
http://autobuild.buildroot.net/results/246/246b3778a1a646afd1c8b9c17b4579fb5a27120e/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported on IRC, our default busybox configuration doesn't support SHA
encoded passwords, breaking login if enabled under system configuration.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
20140129:
Minor bug fix in configs 19d2:0149 and 19d2:2000 (Lars Melin reported)
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version 2.1.0, 2014/01/28
ATTENTION: -I flag meaning reversed, default is to skip SCSI inquiry;
introduction of StandardEject, replacing many MessageContents with the
same function, reducing size of device config files, and always including
the 'Allow Medium Removal' before ejecting (thanks to Lars Melin for
the idea); fix in "bulk_read", removing bogus CSW request (report from
"Sonya@zte")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version includes:
- add f2fstat tool
- critical bug fix on nat bitmaps
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Context:
The autobuilders were failing on the symbol _XData32 being in conflicts.
A patch had been added to SDL to add a check to the configure.in
Problem:
Sometimes, the build would fail, because of an _XData32 symbol being in
conflicts eventhrough the patch was here.
What was happening:
Following the classic buildroot workflow:
- Extract
- [...]
- Apply 001 patch, which touches configure.in AND configure
- Apply 002 patch, which touches configure.in
- Invoke autogen.sh
- [...]
Right before running autogen.sh, we have configure.in which is more
recent than configure, which is fine.
We then, execute autogen.sh which, basically, runs autoconf.
If your machine was lighty loaded, the time difference between
configure.in and configure was really tiny (ms order), which seems to be
neglected by autoconf.
The results was that the configure was *NOT* generated. And our second
patch was not taken into account.
If your machine was under heavy load, the time difference between the
two files would have been greater and then *maybe* picked up by
autoconf. And then the configure file was re-generated.
When the 0001 patch was introduced, SDL package did *NOT* run it's
autogen.sh, which is why it touches also the configure.
This came later, causing this behavior.
Fixes:
http://autobuild.buildroot.net/results/d1c/d1c36f634dbf6b6e5d18444c2a23dfd129202b80/
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The legacy support for the old BUILDROOT_DL_DIR and BUILDROOT_CONFIG
breaks down when make is invoked recursively - which is done in a few
cases, e.g. silentoldconfig, external-defs, ... These targets always
give a legacy error.
For BUILDROOT_DL_DIR, this is fixed by making sure that the original
value of BR2_DL_DIR taken from the environment is also exported again.
For BUILDROOT_CONFIG, this is fixed with an additional comparison of
the environment variable's value with the fake value that we introduce
ourselves.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use correct bin name so that JPEG_TURBO_REMOVE_USELESS_TOOLS fixup
actually removes it.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use correct bin name so that LIBJPEG_REMOVE_USELESS_TOOLS fixup
actually removes it.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cpanminus was marked as broken, now it becomes useless with the Perl infrastructure.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Perl infrastructure uses a host version of Module-Build
(see previous commit "host-perl-module-build: new package").
The target version is never used, so no need to patch it.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The official Perl documentation refers only to PERL5LIB.
PERLLIB is obsolete, we don't need to be compatible with Perl4.
PERL5LIB is used in all environment, so it is simpler to just export it.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This goes hand-in-hand with the kernel update.
The version is taken from meta-ti.
The new kernel version, 3.12, requires a newer PM FW.
This should correspond to v05.00.00.02, though that tag
has not been pushed...
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise build fails in intl/relocatable.c with:
./relocatable.c: In function 'libintl_relocate':
./relocatable.c:402:40: error: 'INSTALLPREFIX' undeclared (first use in this function)
./relocatable.c:402:40: note: each undeclared identifier is reported only once for each function it appears in
[Peter: drop redundant 'else' part]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Libtorrent has dependencies on atomic operations. However ARC GCC doesn't
implement those at the moment so package should be disabled. Rtorrent
depends on libtorrent.
This fixes:
http://autobuild.buildroot.net/results/51414e22c8ea47c38df20d864526a370c5a895d7/
Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (all user-visible options should be
prefixed BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_DL_DIR but not BR2_DL_DIR.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we now always disable documentation on target, there is no need to
have a separate variable DISABLE_DOCUMENTATION anymore.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel headers versions 3.1, 3.3, and 3.5 have been deprecated
since 2013.02 and thus can be removed in 2014.02.
For legacy handling, we automatically select versions 3.2, 3.4, and 3.6,
respectively.
Additionally, this patch removes the now unused symbol
BR2_DEPRECATED_SINCE_2013_02.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gdb versions 7.2.x and 7.3.x have been deprecated since 2013.02 and thus can
be removed in 2014.02.
For legacy handling, version 7.5.x is automatically selected.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ccache target package has been deprecated since 2013.02 and thus can be
removed in 2014.02. This does not change anything about host ccache (used
for speeding up builds).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch removes deprecated symbol BR2_HAVE_DOCUMENTATION and all its
usage. Additionally, it removes the now unused BR2_DEPRECATED_SINCE_2012_11.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The automake support on target has been deprecated for more than four
buildroot releases and thus can be removed. This doesn't change anything
about the host automake support.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The autoconf support on target has been deprecated for more than four
buildroot releases and thus can be removed. This doesn't change anything
about the host autoconf support.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xstroke has been deprecated since 2013.02 and thus can be removed in
2014.02.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If any of the post-image scripts wants to handle squashfs filesystems,
we need to expose an option for squashfs-tools to be user-selectable.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This avoids duplication of the version selection between these two files.
Cc: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changes snmp++v3.3.3
====================
- Fixed: [APP-30] SNMP++ cannot BER decode Oids starting with 2 and
with second sub-identifier >39 correctly.
- Fixed: [APP-31] SNMP++ does not encode Oids starting with 2 and
second sub-ID greater than 47 correctly.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gpsd will fail on an internal compiler error for the microblaze
architecture so disabling it on that architecture.
Fixes:
http://autobuild.buildroot.org/results/42d/42da870722f24e4202d8265597771a0449e74cfd
[Peter: add comment explaining why]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ARC compiler has an internal failure while compiling this package
so disable this package for this architecture.
Fixes:
http://autobuild.buildroot.net/results/ef6/ef6a0e2d382ae202bb8f0e9fc9f5e48c90119faf
[Peter: add comment explaining why]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All PowerPC CPUs do not support altivec instruction set; so enable its
support only when the sub-architecture support it.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Forcibly disable the vorbis encoder support when the vorbis option isn't
enabled to avoid autodetection.
Said autodetection has a build bug that it won't properly set libvorbis
build options when the decoder is disabled. Fixes:
http://autobuild.buildroot.net/results/a46/a46b4c97fe126b23a96051a8bf1243a7f4935434/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rpi-compositor was broken with the 1.4.0 release,
but we now have a fix from upstream.
Add this patch, and remove the 'depends on BROKEN'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With toolchains that include linux kernel headers before the 3.4 kernel,
an issue exists with linux/mmc/ioctl.h in that it doesn't include
linux/types.h.
Merged the patch with an existing patch for mmc-utils as it modifies
the same file and fixes similar issues. Also updated the patch to
conform to the buildroot patch naming standard.
Fixes:
http://autobuild.buildroot.net/results/828/828c7a686736710c4fcb152230d0fa6b5f4d6ad3
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the opencv package globally depends on BR2_TOOLCHAIN_HAS_THREADS
and BR2_USE_WCHAR, then cleanup these redundant (and useless)
dependencies in the opencv's sub-options.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thanks to the previous patches, no-one is using pkgparentdir anymore, so
remove it.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fourth parameter to inner-generic-package is no longer used. Removing
this parameters requires renaming all usages of $(5) to $(4), and updating
the calls to inner-generic-package (and equivalent for the other package
infrastructures).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In preparation of the removal of the 4th parameter to inner-generic-package
and the pkgparentdir helper function, this patch removes the direct usage of
this 4th parameter. The remaining usage
ifeq ($(4),boot/)
can become
$(filter boot/%,$(pkgdir))
instead (and similar for toolchain).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Variable FOO_DIR_PREFIX in inner-generic-package isn't really needed. The
contents of this variable are 'package' for normal packages, 'boot' for
bootloaders, and 'linux' for the linux kernel.
When patching a package, all you need to know is the directory where
patches can reside, which is already returned by $(pkgdir). In order to be
able to use this variable outside of inner-generic-package, we introduce a
target-specific variable PKGDIR that equals to this $(pkgdir).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When calling make 'functions', the $(call) keyword is only needed if the
function takes arguments. For pkgdir, pkgname and pkgparentdir this is not
the case, so we can remove the call to make things more readable.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (qstripped variant of a config option
should be named BR_XXX).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch removes the sh2, sh3 and sh3eb support, because the user
base is inexistent, and the Linux support for these architectures is
poor. The sh2a support is preserved, because at least one user
expressed interest in this architecture, and is actually using it:
http://lists.busybox.net/pipermail/buildroot/2013-April/070399.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default of choosing the fixed-point implementation if
the target hardware does not have floating-point unit is not
always the best choice. Modern ARM hardware has floating
point support but most likely the fixed-point implementation
in Opus will still perform better. In particular if your CPU
supports the NEON extension.
This commit allows to select the fixed-point implementation
manually and sets the default based on the availability of
a floating-point unit.
[Peter: force option for sw float, slightly reword]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pread/pwrite handling on the 0.9.33 branch doesn't take into
consideration architectures with an ABI requiring natural alignment for
64bit arguments (afaik ARM EABI, MIPS O32, PPC, SH and Xtensa), causing
havoc.
The issue has been brought with the uClibc developers, but so far a fix is
not available - So lets revert the patches for now as they cause real
issues.
For further details, see:
http://lists.busybox.net/pipermail/buildroot/2014-January/087050.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current stripping strategy requires that shared libraries have the
executable permission. However, this is by far not something
recognized as a standard behavior: Debian/Ubuntu distributions for
example do not have executable permissions on their
libraries. Therefore, pushing to upstream packages fixes that add the
executable permissions is not easy.
As a result, this commit improves the stripping logic so that it not
only strips the files that are executable, but also the ones that
match '*.so*', which should match both the shared libraries and the
dlopen()'able plugins, as long as they have a .so extension.
Thanks to this addition, a number of manual "chmod +x" done by various
packages can be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script finds libz in the distribution libraries, which causes
zlib support to be dropped from the cross-compiled GnuTLS.
Signed-off-by: Antoine Pierlot-Garcin <antoine@bokbox.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
iucode_tool is a program to manipulate Intel® X86 and X86-64 processor
microcode collections, and to use the kernel facilities to upgrade the
microcode on Intel system processors.
It was originally sent by Richard Braun <rbraun@sceen.net>
[Peter: drop 'sid' from upstream URL]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some compilers, such as the Blackfin GNU compiler, prefix a character to any
C symbol in generated assembly code. If any assembly symbol is invoked
from C code, it needs to be prefixed as well.
Note: since autoreconf doesn't work with this package because automake
isn't used.
Fixes:
http://autobuild.buildroot.net/results/c40a22814b405de2c5c75139cfc393c863ed4b81/
[Ryan: add information about why patching configure is ok]
[Ryan: add renaming of patches to be consistent with standard]
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a couple of buffer overflows so it should be considered as a
security bump (no CVEs though).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The uClibc options for sh2a is SH2A, not SHA2, and this value should
be used for sh2a, not sh2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current git download helper creates the tarball by doing:
git archive <version> | gzip -c > <tarball>
Unfortunately, even if "git archive" fails and returns a non-zero
error code, gzip ignores that, compresses nothing, and returns success
(zero error code). The consequence of this behavior is that when the
git version provided in the package is incorrect, we are not failing
during the download step, but later on when trying to extract the
tarball (which was incorrectly created as a result of the failing git
archive).
To fix this, we change the tarball creation logic to:
git archive -o <tarball>.tmp <version> &&
gzip -c <tarball>.tmp > <tarball> &&
rm -f <tarball>.tmp
If the build is interrupted during the "gzip" command, we may leave
the .tmp file behind us, but this also happens with wget downloads,
and is generally not considered a problem, since this temporary file
will be overwritten next time we attempt to do download this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The uclibc version condition is accurate but doesn't cover external
toolchains, so also exclude for avr32 too which only has 0.9.31 enabled.
Fixes:
http://autobuild.buildroot.net/results/4ee/4eec6e29d0f2a46bbbe3a748e85bd06c3601b7c1/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but internal variables should be name BR_foo, not
BUILDROOT_foo (I think ..).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but internal variables should be name BR_foo, not
BUILDROOT_foo (I think ..).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udpcast was checking the (non-existing) BR_LARGEFILE variable to know if it
should enable stat64 or not, but the package itself depends on largefile
support and more importantly, configure doesn't look at this variable at
all, so we can just drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the semantics of FOO_DIR_PREFIX will change in the following patch, we
want to remove unnecessary usage of this variable.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The intel microcode is a proprietary package which provides a data file
used to correct processors errors.
It was originally sent by Richard Braun <rbraun@sceen.net>
[Peter: set _LICENSE_FILES]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If iconv is built before gnupg, this package will link against it; if it is
built after this package, it will not be linked against it. To make the
build reproducible, make sure that iconv is always built before this
package.
Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the GPM_RUN_AUTOGEN to be a PRE_CONFIGURE step because this step
depends on the dependancies being built. If it is a POST_PATCH step
the dependencies won't be built and the GPM_RUN_AUTOGEN step will fail
(if the host doesn't have autotools).
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some toolchains include asm-generic/int-l64.h from their asm/types.h
file for certain 64-bit architectures. This causes a conflict between
types like this one:
asm-generic/int-l64.h:28:25: error: conflicting types for '__s64'
typedef __signed__ long __s64;
^
In file included from mmc.h:17:0,
from mmc_cmds.c:30:
asm-generic/int-ll64.h:29:44: note: previous declaration of '__s64' was
here
__extension__ typedef __signed__ long long __s64;
This patch has been submitted upstream.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Convert the ever growing drop-SUSv3-legacy patch to a sed expression.
Modify the initscript to create ed25519 server key.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes for h264 video deocding, audio playback and cec.
Some improvements in HDMI output management.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If any of the post-image scripts wants to create mtd/ubi images,
we need to expose an option for mtd-tools to be user-selectable.
[Peter: fix include order]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mtd-utils also contain ubi/ubifs tools, so let's add it to the menu option.
Also, add an URL to stick to the help message standard.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: small white space fixes as pointed out by Yann]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Noop in Buildroot as we override CFLAGS, but cleaner.
Reported-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
JOE is an easy-to-use, full-screen, terminal-based text editor.
http://joe-editor.sf.net
[Peter: add uClibc patch, add to package/Config.in, optional ncurses support]
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zxing package currently selects libiconv when locale support is not
available in the toolchain. This patch stops the zxing package selecting
libiconv. The zxing package now uses uses libiconv if it's available
otherwise iconv support is disabled in zxing.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patches applied upstream.
Mark the rpi-backend as broken, since it segfaults.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with 1.4.0, weston requires wayland-scanner to build its DT.
So far, we got away with just hand-building wayland-scanner, and made
that available in HOST_DIR/usr/bin
But now, weston also requires wayland's DTD, which we did not take care of
in our dirty little hack.
So, the best solution is to just build a host-variant of wayland, so
we get both wayland-scanner, and the DTD.
But then, we do not build the target wayland-scanner (he, wayland tries
to run it at build time...). So it is a matter of just tweaking a little
bit the host .pc file (which weston uses to find wayland-scanner, sigh...)
and fake it as a target .pc file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use CFLAGS from command line
- Remove "Check C compiler type (optimization options)"
This test force optimization to -O3
while it is already set in CFLAGS
- Don't use host CPP
- Remove "Check for Large File Support"
LFS support is already set in CFLAGS
Note: configure script still use host nm
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
infozip's Makefile expect $(AS) to output by default to <basename>.o
but when called from Buildroot, the value for $(AS) is set
to to invoke the toolchain's $(AS) directly, and the output of it
goes to a.out.
So, define $(AS) with $(CC -c)
Reported-by: Кирилл Луценко <lucenko_kirill@mail.ru>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with version 2.3.0, libroxml is now using autotools.
With autotools, the -Werror flag was dropped
-> no need for the patch libroxml-0001-werror.patch
With autotools, the availability of -Wno-*-unused is auto detected
-> no need for the patch libroxml-0002-wno-unused-result.patch
Signed-off-by: Tristan Lelong <tristan.lelong@blunderer.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gnutls-01-gettime.patch was applied upstream, AUTORECONF is no longer
necessary.
The GNUTLS_LIBREGEX_CHECK_FIX didn't actually work before, because it was
overwritten by the autoreconf. It looks like things still work without
regex. However, this patch reinstates the regex support by setting
libopts_cv_with_libregex=yes in the environment.
Fixes http://autobuild.buildroot.net/results/b22/b22f2caa79f371c625939b65a88a2073382c5288
(failure in libvncserver) because gnutls.so is now properly linked with -lrt.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: file header, structure like gst-ffmpeg, drop unneeded libav args]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
