The gummiboot package currently fails to build due to incompatibilies
with recent versions of the gnu-efi code.
It turns out that gummiboot has been marked deprecated/obsolete by its
maintainer since July 2015:
https://cgit.freedesktop.org/gummiboot/commit/?id=55df1539c9d330732e88bd196afee386db6e4a1d&utm_source=anzwix
Indeed, gummiboot ended up being integrated as part of systemd as
systemd-boot. While it made sense for a while to keep it as a separate
standalone package, it is not possible to maintain it in Buildroot
without an active upstream, and there are other options for simple EFI
bootloaders these days.
Therefore, let's retire this package.
Fixes:
http://autobuild.buildroot.net/results/5929104a868d2f69ec1b71e5e897b6d1ebf347cf/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a separate U-Boot package that allows to build the
intermediate SPL binary for the Cortex-R5 core on TI's k3
platforms. Usually, the resulting SPL will be used for k3-image-gen to
build the full R5 boot binary tiboot3.bin.
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot does not yet have SPL code to initialize the DDR controller on the
Allwinner D1 - So instead package the sun20i-d1-spl bootloader, which is
based on boot0 from the Allwinner BSP with some modifications to build it
separately from the BSP and boot mainline U-Boot as explained on the
linux-sunxi wiki:
https://linux-sunxi.org/Allwinner_Nezha
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
EDK2 is a modern, feature-rich, cross-platform firmware development
environment for the UEFI and PI specifications.
The initial version of this bootloader package makes it possible to
build firmware for the following seven configurations:
* QEMU x86-64 pc machine
* QEMU aarch64 virt machine, booting directly from flash
* QEMU aarch64 virt machine, booting via the kernel protocol
* QEMU aarch64 sbsa-ref machine
* ARM FVP vexpress machine
* Socionext SynQuacer Developerbox
* SolidRun MacchiatoBin
Support the use of EDK2 UEFI payloads as BL33 in ARM Trusted Firmware.
Signed-off-by: Dick Olsson <hi@senzilla.io>
[yann.morin.1998@free.fr:
- duplicate defaults in Config.in
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 3b551f68a5 (boot/beaglev-ddrlnit: rename to beaglev-ddrinit to
match renamed upstream repo) forgot to update the include in boot/Config.in,
breaking menuconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This packages allows to build the first stage bootloader used on the
BeagleV, which is used even before the DDR initialization and
OpenSBI/U-Boot. Yes, "secondboot" is strange for what is the first
stage bootloader, but that's the upstream name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[yann.morin.1998@free.fr:
- add hash file
- commit is HEAD only right now, so don't reference HEAD
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds a package for the DDR initialization code used on the
BeagleV platform.
The typo in the package name is upstream's typo, and we just keep it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[yann.morin.1998@free.fr:
- upstream name is beaglev_ddrlnit, not *init (keep their typo)
- rename package and variables accordingly
- the referenced commit is no longer the HEAD of said branch
- add a hash file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The RISCV Proxy Kernel (AKA BBL) isn't being used by most distros so has
very limited testing. It has been replaced by OpenSBI and been
deprecated for awhile, so let's just remove it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since the ts4800_defconfig has been removed, the ts4800-mrboot package
is no longer useful, therefore we drop it.
Cc: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenSBI is a much improved alternative to BBL (riscv-pk). Add OpenSBI
support to buildroot.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Thomas:
- disable target installation, as we install nothing
- enable staging installation
- enable images installation only when needed
- improve the comment about the staging installation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE OS is maintained by the OP-TEE project. It provides an
open source solution for development and integration of secure
services for Armv7-A and Armv8-A CPU based platforms supporting
the TrustZone technology. This technology enables CPUs to
concurrently host a secure world as the OP-TEE OS and a non-secure
world as a Linux based OS.
The OP-TEE project maintains other packages to leverage OP-TEE on
Linux kernel based OSes. An OP-TEE interface driver is available
in the Linux kernel since 4.12 upon CONFIG_OPTEE.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0.
https://www.op-tee.org/https://github.com/OP-TEE/optee_os
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- pass CFG_ARM32_core=y when building for ARMv7, otherwise the build
fails
- add a check that verifies that BR2_TARGET_OPTEE_OS_PLATFORM is not
empty
- minor formatting fixes/adjustements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a package for 'shim', an EFI bootloader for secure
boot chain loading.
While gnu-efi supports 32bit ARM, this is currently broken in shim.
Patches to fix this have been submitted upstream but are not included
here for now.
https://github.com/rhboot/shim/pull/162
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: use BR2_PACKAGE_GNU_EFI_ARCH_SUPPORTS, add separate depends
on to exclude ARM32 build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-boot has provided SPL support as a viable replacement for the
2nd stage bootloader on TI platforms. The X-loader project
hasn't had a commit in the log since 12-05-2011.
(https://gitorious.org/x-loader/x-loader)
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the RISC-V Proxy Kernel (pk) package which provides the Berkeley
Boot Loader for booting RISC-V kernel images.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- fix prompt of option to be just "riscv-pk"
- add blank line between help text and upstream URL in Config.in file
- use $(INSTALL) instead of cp to install the generated image]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some systems, including Marvell Armada 7k/8k SoCs, have a separate
System Control Processor (SCP) for power management, clocks, reset
and system control. ATF Boot Loader stage 2 (BL2) loads optional
SCP_BL2 image into a platform-specific region of secure memory.
This package adds SCP_BL2 firmware for Marvell Armada 7040 and 8040 SoCs.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas:
- Use "binaries-marvell" in the Config.in prompt and in the .mk file
header.
- Change the license information.
- Adjust license information: it is GPL-2.0 with the FreeRTOS
exception, and therefore can be redistributed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package adds Marvell Armada SoC DDR training algorithms.
This code is not built separately, it is needed as dependency
to build ATF firmware for Marvell Armada SoCs.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas:
- Remove MV_DDR_MARVELL_SRC_SYMLINK, ATF will directly pick up the
mv-ddr-marvell code from where it is.
- Use "mv-ddr-marvell" as the Config.in prompt, and in the comment
header of the .mk file.
- Add upstream URL in Config.in help text
- Adjust license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
grub is no longer maintained: it is stuck at version 0.97 with huge
patches that have no opportunity to be applied upstream, as upstream
has even renamed it grub-legacy.
Besides, it no longer builds correctly with recent binutils versions,
and even the huge patches we could grab from Debian do not help the
slightest.
Since upstream really considers it dead, and there are at least two
alternatives (grub2 and syslinux), just remove grub.
Add a legacy entry.
Remove the test cases as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
- Rename the package from atfirmware to arm-trusted-firmware, in order
to match upstream.
- Remove option to apply custom patches. We no longer add such options,
and use the global patch directory instead.
- Rename the repo URL/version options, in order to not be Git specific,
in case support for fetching from other VCS is added later. This is
consistent with how other bootloaders handle this.
- Add license information.
- Do not add a weird dependency on the vexpress-firmware package in
Config.in. Instead, simply use it if it's available. Of course, some
configurations (such as the juno configuration) will fail to build if
vexpress-image is not enabled, but it's the responsibility of the
user to create a config that builds.
- Simplify misc aspects in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the SCP (System Control Processor)
firmware for the ARM reference platforms. There will most likely be
other SCP firmware provided by other vendors, but they might be provided
in a different form, so we for now create a vendor-specific package
named vexpress-firmware.
Since this firmware is used for booting, we create the package in boot/
and not in package/.
The package simply installs a single pre-built binary file into the
images directory.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
- Rename the package from scpfirmware to vexpress-firmware.
- Add a Config.in prompt for the package.
- Remove the prompt-less Config.in options to select the Git repo and
version. Since we only support the Vexpress firmware, there's no need
for configurability here, so we just use the right Git repo/version
in the .mk file.
- Use $(INSTALL) -D to install the firmware file.
- Add license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add hash file, as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This MBR routine is based on TS' original bootloader. It is loaded by
the bootrom stored in the companion FPGA, and chainloads an executable
located at the beginning of the first non-fs (0xda) partition.
Signed-off-by: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
[Thomas:
- add hash file.
- install image in INSTALL_IMAGES_CMDS instead of
INSTALL_TARGET_CMDS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the first level bootloader for the Actions Semiconductor S500 SoC,
which is used on boards like Roseapple Pi and LeMaker Guitar.
The bootloader performs basic configuration and chain loads u-boot for
futher setup.
This bootloader is unfortunately only available as a binary blob. It gets
configured for a specific board using a binary (32bit x86) tool based on a
.ini file (somewhat similar to sunxi .fex).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a _very_ small bootloader for STM32 platforms.
At submission afboot-stm32 supports the following boards:
stm32429i-eval
stm32746g-eval
stm32f429i-disco
stm32f469i-disco
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix commit title, add dependency on BR2_arm.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boot wrapper contains both a minimal bootloader and a tool to
generate an image suitable for execution by the AArch64 software
simulator. The image generated embeds the minimal bootloader, the
kernel image, the Device Tree Blob and the kernel command line.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that this new package, at91bootstrap3, is being added alongside the
existing at91bootstrap. This was suggested by Thomas Petazzoni, whose
comments on the mailing list are quoted below.
For this package, I am not sure we can do a simple version bump. Since
there is (was?) no upstream for AT91Bootstrap 1.x, many
vendors/companies had to maintain their patches on top of AT91Bootstrap
1.x. See for example
board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch. Therefore,
removing AT91Bootstrap 1.x from the tree will prevent those platforms
to work. I know people should upgrade, but AT91Bootstrap 3.x is quite
significantly different, so the porting effort is not that simple.
Therefore, I'm wondering whether we should kee at91bootstrap as it is,
and create a separate package at91bootstrap3 for the 3.x generation.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MXS platforms (imx23 and imx28) are relying on bootlets as their first
stage bootloaders, that can then either start a regular second stage
bootloader or directly a Linux kernel. However, the Makefile allows
only to build u-boot and linux images at the same time, which is
not very convenient as we will more likely use only one of them,
so we need to duplicate a bit what is already done so that we are able
to choose what we want to generate.
thomas.petazzoni@free-electrons.com:
* Remove incorrect dependency on BR2_PACKAGE_ELFTOSB
* Each board configuration option is for one board, not multiple
boards, so use singular.
* The i.MX28 support is for i.MX28 EVK only, reflect that in the
option prompt and the option name.
* Use 'generic-package' instead of GENTARGETS
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This will build kickstart and s1l for the selected board and install
them alongside u-boot.
Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
merge xloader
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This will allow to match the currently Config.in option
BR2_TARGET_UBOOT, in order to make it easy to integrate U-Boot into
the package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Grub 2 has been marked BROKEN in June 2010, and nobody cared to fix it
since then.
At that time, it was marked broken because the build process needed a
Ruby interpreter available on the host, and it's really a pain that
building a bootloader needs such a thing.
I've tried to upgrade the package to Grub2 1.99-rcX, and now it does
not need a Ruby interpreter anymore, but instead requires a tool
called "autogen", which itself needs the Guile Scheme interpreter.
Since we haven't heard any complaints about Grub2 being marked broken,
and since it's such a pain to package, let's get rid of it. Of course,
anybody interested in Grub2 is invited to contribute a working
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Yaboot does not build, hasn't been updated since a long time, and
isn't very common these days on embedded PowerPC platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
