This patch upgrades the ATF version to the v2.8 LTS version. Please note
that due to DTS changes from upstream commit
51e223058fe70b311542178f1865514745fa7874 ("feat(stm32mp15-fdts): add
Avenger96 board with STM32MP157A DHCOR SoM") The ATF additional build
variable is also modified to use the new DTS file. Note that the old DTS
file still exists, but no longer works.
Furthermore, the 'E=0' flag is removed from ATF additional build
variable. It was added by commit
deb8d71c92 to avoid TFA build
failure because of '-Werror' flag. However, from version v2.6 or later,
it is not required anymore, the compiler warning was fixed.
The ATF patch
"board/arrow/avenger96/patches/arm-trusted-firmware/
0001-stm32mp157a-avenger96.dts-enable-hash-device-to-unbr.patch" also
has been removed. As it was not required due to using the new dhcore DTS
file for the ATF build.
Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be>
[Arnout: switch to
BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_8_VERSION instead of custom
lts-v2.8.16]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This patch upgrades Kernel version to 6.6.22 LTS on avenger96 board.
Beside that, In accordance with the kernel 6.5rc1 commit
724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
the device tree path also has been modified to point the device tree in
the proper location.
As another change, due to commit 3108eb2e8aa7
("mmc: mmci: Set PROBE_PREFER_ASYNCHRONOUS"), the order of SD card and
eMMC probing has swapped. The SD card is now mmcblk0 instead of
mmcblk1. Thus, the default root append (mmcblk1p4) in 'extlinux.conf'
file in the overlay directory of the board is changed, otherwise the
rootfs was not possible to be detected.
Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Enables U-Boot and required OpenSBI builds for the VisionFive2. Changes
the sdcard.img to use GPT and adds the SPL and U-Boot to partitions
specified in U-Boot's documentation for the board:
https://docs.u-boot.org/en/v2024.01/board/starfive/visionfive2.html
U-Boot config uses BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME with value
"u-boot.itb". Using BR2_TARGET_UBOOT_FORMAT_ITB fails, because the
build does not support u-boot.itb make target.
Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com>
[Peter: document boot mode setting, add U-Boot documentation link]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set correct directory for the BR2_ROOTFS_POST_SCRIPT_ARGS.
Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 6b2329bb80 ("configs/ti_am64x_sk: new defconfig") forgot to
specify the ti-k3-r5-loader, so do that now.
When the defconfig was added, the default version was 2022.10, so use it.
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 4b8fddb060 ("configs/ti_am62x_sk: new defconfig") forgot to
specify the ti-k3-r5-loader, so do that now.
When the defconfig was added, the default version was 2022.10, so use it.
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Using PLATFORM=k3 can leads to a runtime boot crash on some K3 SoC (e.g.
j721e) because the optee flavor is missing.
We could use BR2_TARGET_OPTEE_OS_PLATFORM=k3 and
BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR=am64x but we actually can use
BR2_TARGET_OPTEE_OS_PLATFORM=k3-am64x as explained in the optee-os
Makefile [1]:
# If $(PLATFORM) is defined and contains a hyphen, parse it as
# $(PLATFORM)-$(PLATFORM_FLAVOR) for convenience
This is how meta-ti set the optee-os platform:
meta-ti]$ git grep OPTEEMACHINE
meta-ti-bsp/conf/machine/am437x-hs-evm.conf:OPTEEMACHINE = "ti-am43xx"
meta-ti-bsp/conf/machine/am57xx-hs-evm.conf:OPTEEMACHINE = "ti-am57xx"
meta-ti-bsp/conf/machine/beagleplay.conf:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf:OPTEEMACHINE = "ti-dra7xx"
meta-ti-bsp/conf/machine/include/am62axx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62pxx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62xx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am64xx.inc:OPTEEMACHINE = "k3-am64x"
meta-ti-bsp/conf/machine/include/am65xx.inc:OPTEEMACHINE = "k3-am65x"
meta-ti-bsp/conf/machine/include/j7200.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721e.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721s2.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti-bsp/conf/machine/include/j722s.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/j784s4.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti uses the OPTEEMACHINE to set optee-os platform [2].
[1] https://github.com/OP-TEE/optee_os/blob/4.0.0/Makefile#L37
[2] https://git.yoctoproject.org/meta-arm/tree/meta-arm/recipes-security/optee/optee-os.inc?h=4.0.3#n23
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Using PLATFORM=k3 can leads to a runtime boot crash on some K3 SoC (e.g.
j721e) because the optee flavor is missing.
We could use BR2_TARGET_OPTEE_OS_PLATFORM=k3 and
BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR=am62x but we actually can use
BR2_TARGET_OPTEE_OS_PLATFORM=k3-am62x as explained in the optee-os
Makefile [1]:
# If $(PLATFORM) is defined and contains a hyphen, parse it as
# $(PLATFORM)-$(PLATFORM_FLAVOR) for convenience
This is how meta-ti set the optee-os platform:
meta-ti]$ git grep OPTEEMACHINE
meta-ti-bsp/conf/machine/am437x-hs-evm.conf:OPTEEMACHINE = "ti-am43xx"
meta-ti-bsp/conf/machine/am57xx-hs-evm.conf:OPTEEMACHINE = "ti-am57xx"
meta-ti-bsp/conf/machine/beagleplay.conf:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf:OPTEEMACHINE = "ti-dra7xx"
meta-ti-bsp/conf/machine/include/am62axx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62pxx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62xx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am64xx.inc:OPTEEMACHINE = "k3-am64x"
meta-ti-bsp/conf/machine/include/am65xx.inc:OPTEEMACHINE = "k3-am65x"
meta-ti-bsp/conf/machine/include/j7200.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721e.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721s2.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti-bsp/conf/machine/include/j722s.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/j784s4.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti uses the OPTEEMACHINE to set optee-os platform [2].
[1] https://github.com/OP-TEE/optee_os/blob/4.0.0/Makefile#L37
[2] https://git.yoctoproject.org/meta-arm/tree/meta-arm/recipes-security/optee/optee-os.inc?h=4.0.3#n23
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump the kernel version to 6.6.21.
Also pass the nxp/imx/ path due to the devicetree reorganization
in kernel 6.6.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Passing ip=dhcp to the kernel will cause it to try to configure the network
interface using DHCP and wait up to 120s for the interface to detect a link,
slowing down boots without a network cable a lot.
Instead use the "normal" BR2_SYSTEM_DHCP, E.G. trigger ifup to run the DHCP
client in the background.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel build now requires FIT support in mkimage:
ITB arch/mips/boot/vmlinux.gz.itb
/home/peko/source/buildroot/output-ci20/host/bin/mkimage: unsupported type Flat Device Tree
So enable that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We carried a patch for xilinx xemaclite that was made initially for
qemu < 2.2.0 [1].
Indeed, between Qemu 0.11.0 and 2.2.0 the devicetree binary blob
petalogix-s3adsp1800.dtb (bundled in Qemu sources) used a
compatible string 'xlnx,xps-ethernetlite-2.00.b' that was not
supported by the Linux kernel [2].
These patches could have been removed since Buildroot 2015.02
when this defconfig was tested with Qemu 2.2.0 [3].
[1] https://git.buildroot.net/buildroot/commit/board/qemu/microblazebe-mmu/xilinx-xemaclite.patch?id=fa2798548368d51998fad18d7f6d1ae0ed065b33
[2] c21fd2c79e
[3] 312990555c
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Peter: drop drom .checkpackageignore]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update U-Boot to version 2024.01 and kernel to 6.6.12.
In kernel 6.6 the arm32 i.MX device trees were placed into the
nxp/imx kernel directory, so adapt accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for the AVNET RZBoard V2L.
The board support creates a bootable sd card image. The board is
shipped with a u-boot inside its eMMC. The board support uses this
u-boot and does not build and deploy a u-boot onto the sd card.
Instead the sd card only contains a uEnv.txt, a kernel image and the
rootfs.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package/busybox/busybox-minimal.config is the default configuration
for MMU-less systems, so the setting is redundant and can be removed
without effect.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The defconfig choice is the default one, so it is redundant and can be
removed without effect.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 6b2329bb80 ("configs/ti_am64x_sk: new defconfig") forgot to
specify the Linux kernel version, so do that now.
When the defconfig was added, the default version was 6.4.x, so use
version 6.4.16.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The defconfig choice is the default one, so it is redundant and can be
removed without effect.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 4b8fddb060 ("configs/ti_am62x_sk: new defconfig) forgot to
specify the Linux kernel version, so do that now.
When the defconfig was added, the default version was 6.4.x, so use
version 6.4.16.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Romain:
use BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_4 as suggested
by Giulio Benetti]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
uImage is almost deprecated so let's switch to zImage. Let's also bump
Linux version to 6.1.44, U-Boot to 2023.07 and remove
BR2_TARGET_UBOOT_NEEDS_PYTHON3 since it's selected by
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The custom kernel used for the Rock5B features an FIQ debug
interface which is enabled by default. As it is not needed, it is
disabled. The documentation features instructions on how to
re-enable it, if it is needed.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The assumption is that updates to the stable branch should not break anything,
so we use the latest LTS rather than a specific version.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The assumption is that updates to the stable branch should not break anything,
so we use the latest LTS rather than a specific version.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- v2.6 changes to FIP instead of SSBL boot.
- This requires switching to u-boot.bin in U-Boot, and using that
instead of .stm32 in ATF.
- fiptool expects dtb to be split off from u-boot.bin, so need custom
u-boot-nodtb.bin in addition to u-boot.dtb.
Caveat: this is perhaps not really obligatory, but the ATF
documentation explains it like that.
- The partition must be named fip (while it must be named ssbl for
SSBL boot).
- Since the partition name is set in the common template, all
defconfigs using that template must be bumped in a single commit
- ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has
been added to the configs
- While we're at it, add the structuring comments to
avenger96_defconfig similar like the other defconfigs
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump qemu_arm_ebbr_defconfig and qemu_aarch64_ebbr_defconfig in sync:
- Bump Linux to v6.6.11
- Bump U-Boot to 2024.01
- Bump TF-A to v2.10
While at it, adapt Qemu command line arguments to avoid a warning when
disabling ACPI.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 78e8f383 "configs/imx8mmpico: bump bsp components to version
tn-kirkstone_5.15.71-2.2.0" bumped components, but forgot to add
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y.
This commit adds it to the defconfig to fix the build.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/5858180248
In file included from tools/imagetool.h:24,
from tools/aisimage.c:7:
include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory
1166 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also adjust the include path for the device tree. Since Linux 6.5-rc1
(724ba67515 "ARM: dts: Move .dts files to vendor sub-directories"),
sama5d31.dtsi lives in the microchip subdirectory.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build
error:
include/image.h:1394:12: fatal error: openssl/evp.h: No such file or directory
1394 | # include <openssl/evp.h>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/5858180070
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-By: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump version of Linux to 6.6.14 and U-Boot to 2024.01
and also use upstream configs and dts.
Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even though Northstart platform support is well upstreamed it may always
happen that some kernel change affects/breaks something. It's a good
practice to specify fixed versions for kernel & Linux headers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is now support in both upstream U-Boot and upstream Linux.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
imxrt1050-evk was using uImage switch to using zImage
now.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 6.7 and U-Boot to 2024.01
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those components are aligned with NXP BSP lf-5.15.71-2.2.0.
This commit introduces arm-trusted-firmware upstream patches to
compile the needed version with newer gcc and binutils.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5083366622
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
