By default, qextserialport will attempt to build a shared library.
qesp_static has to be set in CONFIG to build static. Note that
static+shared is not supported, in that case we just build shared.
The install target commands also have to be gated in that case,
because the *.so files don't exist. For completeness we both set
QEXTSERIALPORT_INSTALL_STAGING to NO and don't define
QEXTSERIALPORT_INSTALL_TARGET_CMDS for static builds, although one
of them would be sufficient.
Fixes:
http://autobuild.buildroot.net/results/c9233ad71fd60d0e6a85731a8bd4e598bd84947a
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
qmake hardcodes the path to the sysroot in the install commands, so
we can't use it for target. But it's perfectly usable for staging.
By using 'make install', we get:
- the extserialport.prf file is installed to the mkspecs directory and
libqextserialport.prl in staging/usr/lib, so qmake can do its magic
and add the necessary compiler options;
- it also works for static build, when *.so files don't exist.
The QExtSerialPort and qextserialport.pc files are created by
Buildroot so they still have to be installed explicitly. Note that
upstream installs in the QtExtSerialPort directory, not QExtSerialPort,
so we follow that decision.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: also adjust 0003-pkgconfig.patch to fix the header path.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Distinguish qt/qt5 by defining QEXTSERIALPORT_QMAKE, like is done e.g.
for quazip.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The wscript checks the following.
'func': check_libs(['atomic'],
check_statement('stdint.h',
'int64_t test = 0;'
'test = __atomic_add_fetch(&test, 1, __ATOMIC_SEQ_CST)')),
and
'func': check_statement('stdint.h',
'int64_t test = 0;'
'__typeof__(test) x = ({int a = 1; a;});'
'test = __sync_add_and_fetch(&test, 1)'),
It fails if neither of these are available.
Fixes
http://autobuild.buildroot.net/results/8c20f719f784af1312294600e39004c1d382368a
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mplayer uses a homegrown configure script that calls 'gcc -v | tail -1'
to find the gcc version. However, our toolchain wrapper adds
-Wl,-elf2flt to the gcc arguments. This triggers gcc to do an actual
compile (rather than just printing version info and exiting), and that
compile fails because of the missing definition of main(). The last
line of the output is therefore:
collect2: error: ld returned 1 exit status
and configure doesn't find a version in there. It then falls back to
using the host gcc instead, which breaks things completely a bit
further down the line.
Since mplayer probably isn't very useful on noMMU architectures anyway,
just disable it completely for FLAT.
Fixes:
http://autobuild.buildroot.net/results/58cf28a3acd518633a1d8ea719bc70aefbdfb311
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For powerpc (and powerpc only), the openblas build system will enable
USE_OPENMP when threads are enabled. But the toolchain wasn't
necessarily built with OpenMP support. So explicitly disable OpenMP -
for all architectures, not just powerpc, just to keep things simple.
We could have autodetected whether OpenMP is available at configure
time, but that would be more of a feature patch, it's up to upstream
to do that.
Fixes:
http://autobuild.buildroot.net/results/423b5e79cd4342d6c160ed478054b294b0826c6ahttp://autobuild.buildroot.net/results/c9e554c8f880b49b3c9203725ac5e6565b7e5c6f
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xapp_xload tries to include protocols/rwhod.h, which isn't available on
musl. Fortunately, the package also has stub code that can be enabled
with -DRLOADSTUB (this is done e.g. on Cygwin).
This should probably be detected in configure, but that's a lot more
work.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The CMakeLists.txt was using the wrong variables names to add to
includes and libs, so the additional libraries for static build
weren't added to the link command.
Patch sent upstream to taskwarrior-dev@googlegroups.com but it doesn't
seem to be very active.
Fixes:
http://autobuild.buildroot.net/results/d01e947fa807336ffcfd0fad27397af8e7442833
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
"mpfr" library build was failing due to obsolete ARC asm constraints.
This commit replaces obsolete "J" constraints with up-to-date "Cal"
ones in order to fix "mpfr" build for ARC.
Fixes:
http://autobuild.buildroot.net/results/579/579de571270ad562fbb1699224d557d16276704b//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update URL in Config.in.host to match Config.in.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The library uses the hypervisor instruction HVC, which is only
available on ARMv7-A with Hypervisor extensions. This is limited to
Cortex-A{7,12,15,17}.
In addition the build unconditionally passes -marm so it also needs
ARM instructions to be available, but that is already implied by the
CPU selection.
Implicitly fixes
http://autobuild.buildroot.net/results/53d109fd9055fd20387bb857aced5f89cf3086fd
though it is still not clear why ld doesn't accept the -Ttext=...
option there.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: A12 and A17 also have the virtualization extensions.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure script uses this to set the -mcpu option. If nothing is
passed, it defaults to -mcpu=cortex-a15 for arm, and -mcpu=cortex-a57
for aarch64, which may conflict with the actual architecture.
The --processor option is only really used for arm and aarch64, but it
doesn't hurt to also pass it for the other arches.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the package name, olsr, instead of the tarball file name.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mesa3d tries to use the pkg-config specified wayland-scanner when
wayland is enabled, which points to /usr/bin/wayland-scanner which is
incorrect.
The correct fix is trying to use the PATH wayland-scanner first if it's
available rather than the pkg-config specified one, since tweaking a
staging .pc file with a host binary is wrong. Fixes:
http://autobuild.buildroot.net/results/c0c/c0ca3778c390a33c27073553ca3bef7ac7c5784b/
Patch sent upstream:
https://lists.freedesktop.org/archives/mesa-dev/2016-November/135665.html
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Qt5base BR2_PACKAGE_QT5BASE_OPENGL_LIB depends on BR2_PACKAGE_QT5BASE_OPENGL (see
package/qt5/qt5base/Config.in), so select it.
Fixes [1]:
cp: cannot stat '.../output/host/usr/sh4-buildroot-linux-uclibc/sysroot/usr/lib/libQt5OpenGL.so.*': No such file or directory
[1] http://autobuild.buildroot.net/results/262/2623d48194b778c92134f9bceea923749b26ac6b
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xenomai user space tools fail to build for bfin target since it's
provide it's own pthread_atfork(), shm_open() and shm_unlink()
definition using the inline keyword and weak attribute.
With gcc 5+ the weak attribute is discarded by the inline keyword,
so each symbol are global and are redefined several time while
linking.
Fixes:
http://autobuild.buildroot.net/results/0c2/0c2e5eb4edd4f9427f61d3c9b67a12a7a0e24140
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: add reference to upstream commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of patching configure.ac we can just add the missing
libraries to LIBS. Tested with m68k/arm static builds.
This makes the patch obsolete and the autoreconf can be avoided.
Fixes:
http://autobuild.buildroot.net/results/02f9fc5884d3a7d460b96937183362d6c3fc6fde
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gdb arc-2016.09-rc1 is based on upstream 7.12 gdb version where we can
still disable C++ build. For more information take a look at:
https://sourceware.org/gdb/wiki/cxx-conversion
We wanted to build gdb with C++ as it is used as default in 7.12
and is even a mandatory requirement since 2016/09.
But unfortunately we missed one runtime failure that C++ build causes
and so now we have to disable C++ build.
When gdb arc-2016.09-rc1 is built as a C++ application it segfaults at
runtime for ARC.
We are going to fix the issue in 2017.03 ARC toolchain release. and
before this we remove C++ dependency are adding temporary workaround
to prevent runtime segfaults.
The workaround is to disable building gdb as C++ application via
passing --disable-build-with-cxx config option when building gdb for
ARC.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2016-8858: Memory exhaustion, up to 128MB, of unauthenticated peer.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Avoid duplicated struct fbdev_window definition (introduced by [1]) by
renaming struct fbdev_window to shadow_fbdev_window.
Fixes [2]:
qeglfsmaliintegration.cpp:45:8: error: redefinition of 'struct fbdev_window'
struct fbdev_window {
^
In file included from /accts/mlweber1/rc-buildroot-test/scripts/instance-0/output/host/usr/aarch64-buildroot-linux-gnu/sysroot/usr/include/EGL/eglplatform.h:28:0,
from /accts/mlweber1/rc-buildroot-test/scripts/instance-0/output/host/usr/aarch64-buildroot-linux-gnu/sysroot/usr/include/EGL/egl.h:36,
from ../../../eglfs/qeglfsglobal.h:45,
from ../../../eglfs/qeglfsdeviceintegration.h:48,
from qeglfsmaliintegration.h:37,
from qeglfsmaliintegration.cpp:34:
[1] https://code.qt.io/cgit/qt/qtbase.git/commit/?h=dev&id=58bed4cda98e8e25db8adc61c7db73b6853077dc
[2] http://autobuild.buildroot.net/results/48c/48c458c035162169e8ca7c34ae65e9064822f25a
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gdb simulator seems missing with the Xilinx fork of gdb.
Disable it for microblaze since only the Xilinx version of gdb is
currently available.
Fixes:
http://autobuild.buildroot.net/results/907/9079dad3f138c313a6abb40825baf4d9683a2422
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 2.1.2 version bump did not take into account the recently added fixes.
Update the patches to apply based on upstream pull requests #866 and #867.
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump of dtv-scan-tables to version
ceb11833b35f05813b1f0397a60e0f3b99430aab in commit
b1c8794d8a, one file contains non-ASCII
characters, which causes encoding issues tvheadend. Since no other
file in the dtv-scan-tables code base contains files with non-ASCII
characters (despite having files named after cities in various
countries that definitely do have non-ASCII characters), we rename
this file so that it is named with only ASCII characters.
This fixes the build of tvheadend, which was failing when the host
Python interpreter was python3, due to a file name encoding issue.
Fixes:
http://autobuild.buildroot.net/results/1ae8bee297edb089535a2fb6ec724ebf7976888d/
(tvheadend)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-rc1.
This update contains a lot of important fixes, e.g. it fixes:
http://autobuild.buildroot.net/results/4c7/4c77f33c842b37bf28cb931edf1b290e1bf4d93c//http://autobuild.buildroot.net/results/902/902729a0b98675ad803939e3ecdcf230065a6012//
and other failures.
Other important change is that we also update gdb. Now we are
using gdb 7.12.
This version of gdb requires C++ toolchain support so we add
corresponding dependency to gdb Config.in file.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
[Thomas:
- fix dependency on C++ of gdb, it must use BR2_INSTALL_LIBSTDCPP
- add comment about the C++ dependency of gdb on ARC.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds 3 patches to the quota package, that allows to build
it with musl. One patch was borrowed from OpenEmbedded, the other two
patches are really trivial.
Fixes:
http://autobuild.buildroot.net/results/6f0ff905251d12e198654b8ffe0ea5c15186371e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes [1]:
.../host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib/liblcms2.a(cmsplugin.o): In function `_cmsDeleteContext':
cmsplugin.c:(.text+0x1c2): undefined reference to `_pthread_mutex_lock'
cmsplugin.c:(.text+0x1f6): undefined reference to `_pthread_mutex_unlock'
http://autobuild.buildroot.net/results/5ce/5cee20afd8bef5268832cddcb3a5270746be7a57
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
strace bundle some kernel headers to build libmpers, this mixes userspace
headers and kernel headers which break the build with musl.
The stddef.h from gcc is used instead of the one from musl.
Disable libmpers for musl toolchains.
Fixes:
http://autobuild.buildroot.net/results/6f6/6f63fa2537ff316ba259a20966faadcf5ab9deff
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We should include config.h from sanei_backend.h in order to use the
correct if/else HAVE_FOO.
For some reason with Glibc or uClibc there is no problem but with musl
we have the following weird issue:
In file included from epsonds.h:41:0,
from epsonds-jpeg.c:18:
../include/sane/sanei_backend.h:99:33: error: expected ';', identifier or '(' before 'int'
../include/sane/sanei_backend.h:99:33: warning: useless type name in empty declaration
That's because HAVE_SIGPROCMASK is not defined although it's correctly
detected by the configure script.
$ grep config.log
config.log:#define HAVE_SIGPROCMASK 1
So, include config.h to avoid to redefine sigset_t.
Fixes:
http://autobuild.buildroot.net/results/9f1/9f1f1cb727b5c5407e69172280a3dee880e55cdf
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When statically linking with gnutls, we get definition clash error for
base64_encode which is also defined by gnutls.
This commit adds patch to rename base64_{encode,decode} defined in wget.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building wget with openssl in static libs configuration, wget
build system fails detect openssl because it doesn't specify LD flags
for private libs used by openssl. This specifically happens when we
pass --with-libssl-prefix to configure which tries to find ssl using
custom flags. If we don't specify --with-libssl-prefix, it relies on
pkg-config files to detect ssl and it's LD flags which helps with static
linking.
This commit removes --with-libssl-prefix conf opts. Since this case is
similar to gnutls, we remove same conf opts for gnutls as well.
wget can be built with either gnutls or openssl crypto libraries, so
separate optional support for both is not required. This commit also
does minor optimization by checking for either gnutls or openssl while
at it.
Fixes:
http://autobuild.buildroot.net/results/c6a/c6abdff37b86471cf8b0ceffeff5472042923de0/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
