Bump version of Marvell DDR training software. This update accompanies
update of the ARM Trusted Firmware used on Marvell A8K platforms.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since release 18.12 binaries-marvell repository provides
common firmware supporting both A7K and A8K SoC families.
This commit bumps package version to 18.12 and removes
platform specific binary selections from Config.in.
Single firmware image suitable for both A7K and A8K
platforms is now specified in mk file explicitely.
Legacy handling is not needed, as configs which did have
the option set will continue to work without change.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Arnout:
- Remove BINARIES_MARVELL_IMAGE entirely;
- Add remark about legacy handling;
- Remove the deprecated option from the defconfigs and test that use
it.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since the ts4800_defconfig has been removed, the ts4800-mrboot package
is no longer useful, therefore we drop it.
Cc: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot supports a number of environment variables to pass specific
information. The following patches were submitted in the past to one
some specific Config.in option to pass some of these variables:
- http://patchwork.ozlabs.org/patch/881197/ proposed an option to
pass a custom EXT_DTB= variable
- http://patchwork.ozlabs.org/patch/1018245/ proposed an option to
pass a custom DEVICE_TREE= variable
Instead of adding one Config.in option for each of those variables,
let's provide a generic mechanism to pass arbitrary variables during
U-Boot build step.
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some platform may generate specific boot image files instead of
the generic files tee.bin and tee-*_v2.bin when building OP-TEE OS
package.
This change introduces optee-os configuration directive
BR2_TARGET_OPTEE_OS_CORE_IMAGES that allows board configuration
to specify its expected boot image file names.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: use the current hardcoded values as the default for the new
config option, to avoid breaking existing setups, and therefore use
$(wildcard ...) to support wildcards]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Thomas:
- Config.in: move the BR2_TARGET_OPENSBI_PLAT dependency to a
"depends on", there's no need to have an if...endif block just for
that.
- Config.in: drop the BR2_TARGET_OPENSBI_LIBRARY_ONLY dependency,
since this option doesn't exist
- opensbi.mk: don't use qstrip on BR2_TARGET_OPENSBI_LINUX_PAYLOAD,
since it's a boolean option
- opensbi.mk: use += when adding linux to DEPENDENCIES
- opensbki.mk: refactor the firmware file installation with a loop]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support to extract compiled in default env
via u-boot's get_default_envs script and generate env image from it.
Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The licensing information, and especially the name of the license file,
is known only for the official v1.4 version. For example, in later
versions, the license file has been renamed.
Since we can't be sure of the licensing information for custom versions,
or for versions from git, define that only for the known v1.4 version.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
>>> uboot 2019.07 Collecting legal info
ERROR: No hash found for Licenses/gpl-2.0.txt
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Barebox starting from 2019.02 no longer ships flex/bison generated
parser. Add conditional kconfig dependencies, same as we did for kernel
and uboot.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add upstream patch fixing a build warning that is considered as error.
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
On Github, a large number of projects name their tag vXYZ (i.e v3.0,
v0.1, etc.). In some packages we do:
<pkg>_VERSION = v0.3
<pkg>_SITE = $(call github foo,bar,$(<pkg>_VERSION))
And in some other packages we do:
<pkg>_VERSION = 0.3
<pkg>_SITE = $(call github foo,bar,v$(<pkg>_VERSION))
I.e in one case we consider the version to be v0.3, in the other case
we consider 0.3 to be the version.
The problem with v0.3 is that when used in conjunction with
release-monitoring.org, it doesn't work very well, because
release-monitoring.org has the concept of "version prefix" and using
that they drop the "v" prefix for the version.
Therefore, a number of packages in Buildroot have a version that
doesn't match with release-monitoring.org because Buildroot has 'v0.3'
and release-monitoring.org has '0.3'.
Since really the version number of 0.3, is makes sense to update our
packages to drop this 'v'.
This commit only addresses the (common) case of github packages where
the prefix is simply 'v'. Other cases will be handled by separate
commits. Also, there are a few cases that couldn't be handled
mechanically that aren't covered by this commit.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
[Arnout: don't change flatbuffers, json-for-modern-cpp, libpagekite,
python-scapy3k, softether]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump OP-TEE OS package version to OP-TEE release 3.5.0.
The hash of the license file changed due to a fairly minor change in
the file:
-Unless it has its own copyright/license embedded in its body, each source file
+Unless it has its own copyright/license embedded in its body, each file
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: update the license file hash]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Install generated trusted shared libraries in the target file
system next to the trusted applications.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This change fixes the TA binary files install sequence that were
previously install in target filesystem though
OPTEE_OS_INSTALL_IMAGES_CMDS instead of expected
OPTEE_OS_INSTALL_TARGET_CMDS.
This change removes useless mkdir prior call to $(INSTALL) that
already handles parent directory creation when needed.
This change conditions the .ta files installation upon their
availability as they may exist or not depending on the exact OPTEE
version/configuration selected.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rockchip rk3399 SOC based boards require python pyelftools library for
parsing dtb files, so lets add it as uboot dependency.
This commit introduces a new config option
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS to achieve this.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All downloads performed by buildroot should be integrity-checked if
possible. Enable integrity-checking for the RISC-V OpenSBI sources by
adding a corresponding hash file.
Signed-off-by: Karsten Merker <merker@debian.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
boot/barebox/barebox.hash:5: missing newline at end of file
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes#11756
This fixes the following build error with newer binutils:
objcopy -O binary mbr.elf mbr.bin
perl /build/syslinux/src/syslinux/mbr/checksize.pl mbr.bin
mbr.bin: too big (452 > 440)
Corresponding bug reports:
- https://bugs.archlinux.org/task/60405
- https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=906414
Strip the .note.gnu.property in the linker scripts for the MBRs.
Signed-off-by: Christian Stewart <christian@paral.in>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenSBI is a much improved alternative to BBL (riscv-pk). Add OpenSBI
support to buildroot.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Thomas:
- disable target installation, as we install nothing
- enable staging installation
- enable images installation only when needed
- improve the comment about the staging installation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the trusted firmware is built with debug support (DEBUG defined),
the generated images are located in a different path compared to a
build without debug support. The non debug images are located in
generated directory build/<platform>/release/ while the debug images
are located in generated directory build/<platform>/debug/.
This change introduces the boolean option
BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG to define whether the release or
debug configuration is used to build trusted firmware.
Note that enabling trusted firmware debug support using
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="... DEBUG=1 ..."
would not work since Buildroot will try to copy the generated files
from the wrong path.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This change allows one to build trusted firmware (TF-A) with OP-TEE as
BL32 secure payload.
When BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_DEFAULT is enabled TF-A
builds a BL32 stage according the TF-A configuration directive. If
these specify no BL32 stage then TF-A will build without BL32
support. This is the default configuration and reflects TF-A legacy
integration in BR.
When BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE is enabled TF-A builds
with support for the OP-TEE OS as BL32.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: rename config options, simplify option prompts, and rework
option description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This change allows one to build the TF-A (Trusted Firmware A) for
32bit architectures Armv7 and Armv8 platforms. TF-A supports these
configuration since release v1.5.
Change dependency on BR2_aarch64 into a dependency on either
BR2_ARM_CPU_ARMV8A/BR2_ARM_CPU_ARMV7A to better define
the target architectures supported by the package.
Set package configuration directive ARM_ARCH_MAJOR according to
BR2_ARM_CPU_ARMV8A/BR2_ARM_CPU_ARMV7A. Set package configuration
directive ARCH based on BR2_aarch64/BR2_arm.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This upgrades to version 48 plus the last commits done after that.
Note, that after that, gummiboot is officially dead, so there will
be no more upstream commits after this.
For various reasons, there are still users of gummiboot, so let's base our
work on the latest gummiboot "version".
Signed-off-by: Esben Haabendal <esben@haabendal.dk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a new variable OPTEE_OS_SDK, define by the optee-os
package, which points to the OPTEE SDK installed in STAGING_DIR. This
will allow other pakage to find this SDK more easily.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: improve commit log, rename variable to just OPTEE_OS_SDK]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 1a437fd22f bumped gnu-efi to version 3.0.9. This breaks the build
of syslinux with EFI support due to multiple definitions of 'memset' and
'memcpy'. Backport a patch already applied upstream to fix the problem.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OP-TEE OS is maintained by the OP-TEE project. It provides an
open source solution for development and integration of secure
services for Armv7-A and Armv8-A CPU based platforms supporting
the TrustZone technology. This technology enables CPUs to
concurrently host a secure world as the OP-TEE OS and a non-secure
world as a Linux based OS.
The OP-TEE project maintains other packages to leverage OP-TEE on
Linux kernel based OSes. An OP-TEE interface driver is available
in the Linux kernel since 4.12 upon CONFIG_OPTEE.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0.
https://www.op-tee.org/https://github.com/OP-TEE/optee_os
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- pass CFG_ARM32_core=y when building for ARMv7, otherwise the build
fails
- add a check that verifies that BR2_TARGET_OPTEE_OS_PLATFORM is not
empty
- minor formatting fixes/adjustements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
boot/uboot/Config.in:185: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rockchip's rk3328 encapsulates the BL31 part of ATP but it needs
image in ELF format. This is extension to
2c4809e608
This commit introduces a BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF variable
to achieve this.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Allow user to choose specific, stable version from official ATF
repository
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
