The gpt = "true" form is deprecated in genimage, use
partition-table-type = "gpt" instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Like we do in all other genimage configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch is required to fix an issue in U-Boot for linking
the mkeficapsule tool against -luuid and -lgnutls.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/2720001065
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds additional uboot build options that are
required for kria k26 soms.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the DP audio and video PLL configurations for the zynqmp-sm-k26-revA som.
It needs to be applied for both the kv260 and kr260 starter kits.
The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)
- DP system time clock PLL should use RPLL (0x3)
Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.
Register 0xFD1A007C configures the DP system time clock PLL.
This patch was build and run tested on a zynqmp-kria-kv260 target board.
Upstream-Status: submitted (https://lore.kernel.org/all/fa7e9abc419c9d7648405d1c62367dbe701d09b8.1652709736.git.michal.simek@amd.com/)
This patch will be removed from buildroot in a future release when no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch improves the documentation for kria k26 som qspi programming.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[Peter: drop trailing spaces]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel is from upstream with a few extras to reduce the size of
the 'aspeed_g5' zImage because it is too big for the flash layout.
Mainline U-Boot has enough support to load the kernel from the flash
device and from network but it is still behind the OpenBMC branch
where most the development is done.
The main resulting file from the build is a flash image. The partition
layout matches the OpenBMC one for 32M chips. It makes it easier to
update the different partitions from Linux. Intermediate files can be
used to boot from U-Boot over the network or to boot QEMU using
-kernel/-initrd/-dtb.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel is from upstream and U-Boot is from the OpenBMC branch
because mainline doesn't have the required support for HW, yet.
The main resulting file from the build is a flash image. The partition
layout matches the OpenBMC one for 64M chips. It makes it easier to
update the different partitions from Linux. Intermediate files can be
used to boot from U-boot over the network or to boot QEMU using
-kernel/-initrd/-dtb.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch is a temporary fix for the kv260 u-boot.itb generation
until a proper fix has been implemented within u-boot.
The problem is u-boot can only be configured to use the kria k26
som dts configuration at build time, and the kv260 carrier board
overlay is missing from the build. Without this, all of the carrier
board drivers are missing.
This patch will be removed from buildroot once u-boot can build a
correct u-boot.itb for the kria kv260 starter kit including the
carrier board overlay and corresponding drivers:
https://lore.kernel.org/all/20920b0df6b067aca4040459a9677d7d1d6d766a.1615354376.git.viresh.kumar@linaro.org/
Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[yann.morin.1998@free.fr: add URL provided by Luca]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that all of the extlinux.conf files have been removed,
it is no longer necessary to check if the file exists.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch enables the zynqmp_kria_kv260_defconfig to auto-generate the
extlinux.conf file.
The board/zynqmp/kria/extlinux.conf and board/zynqmp/kria/post-build.sh have
been removed as they are no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch enables the zynqmp_zcu102_defconfig and zynqmp_zcu106_defconfig to
auto-generate the extlinux.conf file.
The board/zynqmp/extlinux.conf has been removed as it is no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch uses the BR2_ROOTFS_POST_SCRIPT_ARGS to auto-generate the
extlinux.conf file, so developers will only need to modify the
board_defconfig file to change the console and boot file system locations.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As we're about to remove the nds32 architecture support, remove the
only defconfig that used this CPU architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add RISC-V 64-bit nommu defconfig for QEMU virt machine with MMU
disabled.
Unlike qemu_riscv64_virt, qemu_riscv64_nommu_virt does not use OpenSBI,
since the kernel is running in machine mode (M-mode).
After the build is complete, you can start QEMU using the launcher
script:
$ output/images/start-qemu.sh
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the board/riscv/nommu directory to add a Linux kernel patch used
for all RISC-V NOMMU builds (QEMU and Canaan Kendryte K210 SoC based
boards). The patch is upstream and will be part of the upcoming 5.19
release.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit [1], the MMU support is mandatory for MMU-capable ARM
cores. This includes the arm926t ARM core used the
qemu_arm_versatile_nommu configuration.
From [2]
"I don't think supporting ARMv5 noMMU makes much sense, as
explained in the commit log. Supporting ARMv7-M definitely makes
sense, but not ARMv5 noMMU."
Remove this defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2477067386
[1] 8c925613dc
[2] http://lists.busybox.net/pipermail/buildroot/2022-May/643064.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch U-Boot from vendor downstream version to upstream. Since the
upstream U-Boot uses binman to build the bootable binary (flash.bin) the
need for the iMX specifc prepare script is no longer required.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds support for Xilinx Kria KV260 starter kit.
KV260 features can be found here:
https://www.xilinx.com/products/boards-and-kits/kv260.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps configs/zynq_xxx_defconfigs to Xilinx software release 2022.1
which includes the following updates:
- U-Boot bumped to 2022.01
- Linux bumped to 5.15.19
- rootfs changed from CPIO to EXT4
- extlinux.conf for distro boot support
- U-Boot migrated from git clone to tarball for faster builds
This patch has been build and run tested on a ZC706 evaluation board.
This patch has been build tested only for zed, microzed and qmtech boards.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the DP audio and video PLL configurations for the
zynqmp-zcu106-revA evaluation board.
The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)
Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.
This patch was build and run tested on a zynqmp-zcu106-revA target board.
Upstream-Status: submitted (https://lore.kernel.org/all/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com/)
This patch will be removed from buildroot in a future release when no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_TARGET_OPTEE_OS=y, mkimage_fit_atf.sh is executed with two additional
variables so that the ITS file contains an additional node for the TEE binary.
Then the TEE binary will be packaged into the ITB in addition to TF-A and
U-Boot.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch provides defconfig and basic support for Andes
45 series RISC-V architecture on AE350 platform.
http://www.andestech.com/en/products-solutions/andeshape-platforms/ae350-axi-based-platform-pre-integrated-with-n25f-nx25f-a25-ax25/
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch to extlinux instead of U-Boot boot script. Drop custom boot
script and genimage config. Instead use common orangepi files from
board/orangepi/common. To help extlinux to find DTB without U-Boot
environment changes, do not strip arm64 board specific directory
from DTB name when installing it in /boot directory. For this
purpose use BR2_KERNEL_DTB_KEEP_DIRNAME config option. Finally,
tidy up configuration file adding section names.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Bump Linux to version 5.4.137
- Bump U-Boot to add new targets, version remains the same
- Drop BR2_ROOTFS_OVERLAY and remove S09modload script because it was
only used by PFE and now PFE is loaded directly by the kernel
- Use Image.gz instead of Image to have a compressed kernel
- Rename ucls1012a.its to br2-ucls1012a.its since post-build.sh and
post-image.sh use different name. This fixes the bug that didn't
allow the creation of the part0-000000.itb file.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Changes:
* Switch to common orangepi scenario for multiple boards (board/orangepi/common) to create an SD image.
* Exclude FAT partition, it is no longer needed for U-Boot.
* Switch SD image from MBR to GPT for partition-uuid to work.
* Switch to extlinux, this is convenient for debugging.
Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Technologic Systems has rebranded as embeddedTS with the current
domain eventually going offline. Update web/doc URLs to correct
resource locations.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following error during image generation:
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid
for mbr and hybrid partition-table-type
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/2103784375
Signed-off-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a U-Boot config fragment to set the correct control device tree file for
each board, rather than using the default (zcu100).
Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Tested-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: reword commit message, rename fragment files]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:
ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
[1] 1d72d8091f
So let's use for EFI System partition:
'partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
and for Root partition (32-bit ARM):
'partition-type-uuid = 69DAD710-2CE4-4E3C-B16C-21A1D49ABED3'
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717242
FTR, the magic UUID are from:
https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Changes:
* Exclude FAT partition, it is no longer needed for U-Boot.
* Switch the rootfs partition from MBR to GPT for partition-uuid to work.
* Switch to extlinux, this is convenient for debugging.
* Create common scenarios for multiple boards to create an SD image:
board/orangepi/common. Currently only orangepi_zero makes use of the
common infrastructure.
Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: remove rootfs size = 63M and remount rw]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Actually genimage fails to create final image with:
```
ERROR: hdimage(disk.img): partition [MBR] (offset 0x1b8, size 0x48) overlaps previous partition boot (offset 0x0, size 0x200)
ERROR: hdimage(disk.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
```
This is because genimage 15 is less permissive than before, so let's add
holes = {"(440; 512)"} to leave room to MBR.
The generated image is identical to the image generated by the previous
version of genimage.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1865935249
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch:
- adds support for Xilinx ZCU102 evaluation board
- ZCU102 features can be found here:
https://www.xilinx.com/products/boards-and-kits/zcu102.html
Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: only build tested]
[Peter: use git describe for git hashes for clarity, add DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch:
- bumps ATF to Xilinx v2.6: mainline v2.6 requires patch to build
- bumps U-Boot to Xilinx 2022.01: important drivers not in mainline
- bumps Linux to Xilinx 5.15: important drivers not in mainline
- deletes board/zynqmp/patches directory: patches already in mainline
- modifies board/zynqmp/genimage.cfg: U-Boot 2022.01 uses u-boot.itb format
- adds extlinux.conf to vfat bootfs
- modifies U-Boot to unified xilinx_zynqmp_virt_defconfig (supports all boards)
- adds support for SPL pm_cfg_obj.c loading to PMU firmware
- enables support for host machines without OpenSSL required by U-Boot and Linux
Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: only build tested]
[Peter: use git describe for git hashes for clarity]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BL i.MX8M Mini is a baseboard that includes the SoM SL i.MX8M Mini.
https://www.kontron.com/produkte/baseboard-bl-i.mx8m-mini/p158549
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: explicitly set BR2_cortex_a53=y]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
To fix the first genimage error report, change 'partition-type' entries
to the appropriate 'partition-type-uuid'. Then genimage starts to
complain about overlaps:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
To fix the second genimage error report, update the size of bootloader
file. Do not reserve additional space for GPT partition table since
new genimage is able to keep track of it.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478371
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:
ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
[1] 1d72d8091f
So let's use for EFI System partition:
'partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
and for Root partition (64-bit ARM/AArch64):
'partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae'
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717241
FTR, the magic UUID are from:
https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:
ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
[1] 1d72d8091f
So let's use for EFI System partition:
'partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
and for Root partition (64-bit ARM/AArch64):
'partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae'
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717240
FTR, the magic UUID are from:
https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:
ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
[1] 1d72d8091f
So let's use for EFI System partition:
'partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
and for Root partition (64-bit ARM/AArch64):
'partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae'
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717243
FTR, the magic UUID are from:
https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:
ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
[1] 1d72d8091f
So let's use for EFI System partition:
'partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
and for Root partition (64-bit ARM/AArch64):
'partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae'
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717059
FTR, the magic UUID are from:
https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Genimage 15 restricted the partition-type option to mbr and hybrid
partition-table-type and now prints a warning when it is used [1]:
ERROR: hdimage(disk.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
[1] 1d72d8091f
So let's use for EFI System partition:
'partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
and for Root partition (64-bit ARM/AArch64):
'partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae'
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1929717055
FTR, the magic UUID are from:
https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add patch to fix linux bug:
```
HOSTLD scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
```
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478164
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
RK3399_ROCKPRO64 has been picked from pine64/rockpro64 but here we deal
with orangepi-rk3399, so let's change the label to RK3399_ORANGEPI.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Linux config already enabled drm-virtio for graphics output, but not the
corresponding virtio-input / evdev drivers for input or the compatibility fb
option.
Enable them so keyboard/mouse input works and /dev/fb0 is provided.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Qemu 6.0.0 [1], a warning appear in the log if a short-form
boolean option is used.
[1] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=ccd3b3b8112b670fdccf8a392b8419b173ffccb4
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CM4 IO Board is equipped with an on-board RTC connected over I2C,
and has USB 2.0 host ports.
This commit loads the appropriate overlays to enable both. The USB 2.0
interface is by default disabled on CM4 to reduce the power
consumption so it needs to be explicitly enabled on the CM4 IO Board
to use the USB ports.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The CM4 IO Board is equipped with an on-board RTC connected over I2C,
and has USB 2.0 host ports.
This commit loads the appropriate overlays to enable both. The USB 2.0
interface is by default disabled on CM4 to reduce the power
consumption so it needs to be explicitly enabled on the CM4 IO Board
to use the USB ports.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The mmc block device number can vary, so passing a mmc block device to
specify the location of the rootfs is not a reliable
approach. Instead, use the root=PARTUUID=<uuid> mechanism, where the
uuid is found by U-Boot.
Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
commit 0d0f84d200
added the missing host-dtc dependency to riscv-isa-sim.
The spike simulator calls the dtc binary at its startup. The host dtc
command needs to be in the PATH at that time.
This commit add the buildroot host binary directory into the PATH of the
start.sh helper script. It make sure spike will use the buildroot dtc
version. This commit fixes this start.sh script on host not providing
the dtc command. Since the "spike" binary is now in the PATH, the
binary name is also simplified.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2022.01 and kernel to 5.15.13.
After the conversion to U-Boot device model, the SD card is
device '1', so change the boot script accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Bamboo board is an evaluation board for PowerPC 440EP CPUs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PowerNV is the platform using the OPAL [1] firmware on OpenPOWER
systems. OPAL first loads a kernel and an initramfs image based on
buildroot including a second boot loader petitboot [2]. The latter
does device discovery and kexecs a new Linux image from disk or
network.
QEMU implements PowerNV machines [3] for the POWER8, POWER9 and
Power10 processors which are used for dev and tests. POWER8 images
being compatible with POWER9 and Power10, simply add a single
qemu_ppc64le_powernv8 board for all.
The QEMU script boots directly from a nvme disk because it is simple
enough but a real system would boot from a ramfs first.
[1] https://github.com/open-power/skiboot/blob/master/doc/overview.rst
[2] https://github.com/open-power/petitboot/
[3] https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since on olinuxino_lime/lime2 we have a Linux version >= 4.20 we need to
pass drm_kms_helper.drm_leak_fbdev_smem=1 to kernel command-line that
really enables DRM_FBDEV_LEAK_PHYS_SMEM. CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM
only adds the code for this, but drm_leak_fbdev_smem is 0 by default, so we
need to override it with 1. Same goes for drm_fbdev_overalloc that
must be at least 200 for having a double buffer that is required by
Mali. This fixes both olimex_a20_olinuxino_lime and lime2 that use
extlinux.conf.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This platform has its own kernel defconfig in Buildroot, but we cannot
get quick idea about how much it diverged from the in-kernel defconfig.
Let's use the upstream arch/arm/config/versatile_defconfig as a base,
and maintain the diff as a merge-config fragment. The same .config is
still generated based on the 5.10.7 kernel.
The diff is quite big, but this is a good start-point for cleanups.
Follow-up works can drop diff lines unless we find a good reason for
divergence.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[Arnout: rename linux-nommu.config to linux-nommu.fragment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This platform has its own kernel defconfig in Buildroot, but we cannot
get quick idea about how much it diverged from the in-kernel defconfig.
Let's use the upstream arch/arm/config/versatile_defconfig as a base,
and maintain the diff as a merge-config fragment. The same .config is
still generated (based on the 5.10.7 kernel).
The diff is quite big, but this is a good start-point for cleanups.
Follow-up works can drop diff lines unless we find a good reason for
divergence.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[Arnout: rename linux.config to linux.fragment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This Linux defconfig fragment is needed to disable Lima driver in favour of
Mali(if enabled). This because Lima is enabled by default in Linux's
sunxi_defconfig and if we enable Mali driver in Buildroot it will fail to
load. So let's set CONFIG_DRM_LIMA=n. Of course this fragment is only used
by Buildroot defconfigs that enable Mali driver.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Current U-Boot is an old version and fails to build:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump U-Boot to fix the problem.
Latest U-Boot has switched to distro boot and SPL, so make the necessary
changes to support it. Other advantage of bumping U-Boot is that
it also supports the other imx6ul-pico variants.
While at it, also bump U-Boot to the 5.15 LTS.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006192
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a virtio-net-pci device with a user mode host network backend
Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a virtio-net-pci device with a user mode host network backend
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add new defconfigs for sama7g5 evaluation kit.
Update README with new defconfigs.
Board uses linux 5.15 mainline.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
To fix the first genimage error report, change 'partition-type' entries
to the appropriate 'partition-type-uuid'. Then genimage starts to
complain about overlaps:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
To fix the second genimage error report, update the size of bootloader
file. Do not reserve additional space for GPT partition table since
new genimage is able to keep track of it.
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006300
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
genimage v15 complains about the GPT overlapping with the RCW. Move it
to offset 16k which is between the rcw (which isn't expected to grow
much more) and the bootloader.
This will fix the following error:
ERROR: hdimage(sdcard-emmc.img): partition [GPT array] (offset 0x400, size 0x4000) overlaps previous partition rcw (offset 0x1000, size 0x580)
ERROR: hdimage(sdcard-emmc.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Genimage 15 deprecated the gpt option and now prints a warning when it is
used:
INFO: hdimage(sdcard.img): The option 'gpt' is deprecated. Use 'partition-table-type' instead
So change the genimage configuration files to use that instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1865935239
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
So change to partition-type-uuid instead. With that fixed, genimage-15 then
also complains about the overlap between the u-boot partition and the GPT:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)
So adjust the u-boot partition to end just before the GPT.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
kernel & uboot come from Olimex forks
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel now has support for dma, ethernet, i2c, mmc, pinctrl, regulator,
so enable drivers for those, change to a ext4 rootfs and enable DHCP on
eth0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
fix the following error:
ERROR: hdimage(sdcard.img): partition [MBR] (offset 0x1b8, size 0x48) overlaps previous partition bl1 (offset 0x0, size 0xc200)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
which started at the genimage version bump to 15 commit.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1865935217
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Rename the configuration to explicitly distinguish between sd and xip.
As a result, the readme files have also been changed.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel generated by the configuration for the STM32f429-discovery
board is buggy:
Fixes:
Unhandled exception: IPSR = 00000006 LR = fffffff1
CPU: 0 PID: 1 Comm: init Not tainted 4.11.0 #2
Hardware name: STM32 (Device Tree Support)
task: 9041a000 task.stack: 907c0000
PC is at ret_fast_syscall+0x2/0x4a
LR is at tty_ioctl+0x1ad/0x75c
pc : [<0800d942>] lr : [<080c2e05>] psr: 4000000b
sp : 907c1fa8 ip : 0000001c fp : 905961a2
r10: 00000000 r9 : 907c0000 r8 : 0800dae0
r7 : 00000036 r6 : 905e7e60 r5 : 00000000 r4 : 905e7ebc
r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000000
xPSR: 4000000b
CPU: 0 PID: 1 Comm: init Not tainted 4.11.0 #2
Hardware name: STM32 (Device Tree Support)
[<0800fbf9>] (unwind_backtrace) from [<0800f05b>] (show_stack+0xb/0xc)
[<0800f05b>] (show_stack) from [<0800f553>] (__invalid_entry+0x4b/0x4c)
Inspired by commit a3e3d9c198 ("configs/stm32f469_disco_xip_defconfig:
alternative defconfig for XIP"), update the stm32f429_disco_defconfig
configuration to use a newer kernel. Current setup kernel + rootfs fits
in 1.6MB on-chip flash memory.
The kernel has been moved to new flash bank due to growth of dtb size.
Remove upstream patch.
For better binary size optimization gcc LTO is turned on.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Newer versions of the kernel generate device trees that are not
storable in a single 16kB sector. In these cases the kernel load address
must be changed.
The commit 2e499dcff3ef ("Add possibility to use custom kernel load address")
adds the possibility to override the default (0x08008000) kernel load
address.
This also required changes to the stm32f429_disco_defconfig and
stm32f469_disco_xip_defconfig configurations. Patching is no longer
needed.
Also update whitespaces in hash file (2 spaces).
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current configuration fails to boot on the stm32f469-disco board.
Make it bootable again by reverting the DRAM patches.
Also change the kernel load address from 0x8010000 to 0x800C000 to
allocate more space to the kernel, since 32kB for the device tree is
enough.
Also clean up the rootfs a bit with the common stm32-post-build.sh
script.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Beaglebone Black Wireless needs a specific DT, which u-boot tries to
load based on the board name. Make sure we ship the DT so that we can
boot on that platform.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
1) Now u-boot needs SCP environment variable specified that can point to
the or1k coprocessor firmware while if coprocessor is not used it must
be passed /dev/null as we do in this case.
2) We now use the u-boot-sunxi-with-spl.bin instead of u-boot.itb since
it's produced by u-boot anymore.
3) U-Boot 2021.10 requires python 3 and openssl so let's enable them.
4) Remove local patches for uboot and linux.
5) Remove global patches path from defconfig.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As reported by check-package (by calling it directly):
generate your patches with 'git format-patch -N'
Change all affected files using this command:
$ sed 's,^\(Subject: *\[PATCH\)[^]]*,\1,g' \
-i $(find * -name '*.patch' -type f)
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump Linux kernel version to 5.15.4.
We enlarge the boot partition to follow the kernel image size increase and
update the documentation.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Reviewed-by: Dick Olsson <hi@senzilla.io>
Cc: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 82d1e8c628 (boot/grub2: use none platform when building for
host) changed host-grub2 to only install the tools, not the actual
bootloader or its modules, as they are of no use on the host.
It so happened that, when not instructed to built for a specific
platform, the grub2 buildsystem would default to build the legacy bios
platform (at least when the build happens on an x86 or x86_64 host).
However, because the host is more often than not an x86 or x86_64, when
the target was also an x68 or x86_64, the modules built for the host
could be re-used for the target, and this is what was done for our
pc_x86_64_bios_defconfig.
But now that we explicitly tell the grub2 buildsystem to not build any
platform when we build host-grub2, we no longer have access to the grub2
modules from the host directory, and the build fails when assembling the
final image.
We fix that in two ways:
First, we ensure that individual modules from the target grub2 get installed
in target/; we can only do that if the target grub2 tools are also
installed, so we enable that in the configuration.
Second, we fix the post-build script to look in target/ rather than in
host/.
All that, just for the 512-byte boot.img bootstrap, which pulls in all
the other modules (4.3MiB), the tools (8.8MiB)... But we are not going
to cherry-pick individual modules; this is error prone and
unmaintainable...
Reported-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Köry Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This board is now supported by mainline u-boot and Linux. For U-Boot we
unfortunately still need a patch as the available (<rev A2) boards do not
have an identification eeprom, causing boot failures.
Use the workaround patch by Robert Nelson also used by the official bb.org
builds.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig uses arm-trusted-firmware version 1.5 which fails since
commit eacf7a1d0b ("package/gcc: switch to
gcc 10.x as the default").
Backport a patch from v2.2 to fix the build.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1768915296
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Option "offset = 12288K" must be "offset = 12M" according to the new
guidelines specified in Buildroot Manual with previous patch.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Option 'size=10M' must be 'size = 10M'.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For consistency 'offset = 256k' must be 'offset = 256K'
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The old U-Boot version used does not build with hostcc >= 10. Backport a
patch fixing that issue. Same goes for Linux so let's backport a patch for
it too.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1758966188
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, when BR2_LINUX_KERNEL_INSTALL_TARGET=y is selected, issuing
a "saveenv" command in the U-Boot prompt may lead to rootfs corruption.
When BR2_LINUX_KERNEL_INSTALL_TARGET is not selected, then
board/freescale/common/imx/genimage.cfg.template is used as per the logic
inside board/freescale/common/imx/post-image.sh.
board/freescale/common/imx/genimage.cfg.template correctly puts the
rootfs at a safe offset.
With BR2_LINUX_KERNEL_INSTALL_TARGET=y, then
board/freescale/common/imx/genimage.cfg.template_no_boot_part or
board/freescale/common/imx/genimage.cfg.template_no_boot_part_spl
are used and no offset to the rootfs is given, which may cause U-Boot
environment area to write into the rootfs area, causing the rootfs
corruption.
Avoid this problem by placing the rootfs at an 8MB offset, just like
it is done in board/freescale/common/imx/genimage.cfg.
Tested on a imx6qp-wandboard and also on a custom imx6ull based board.
"saveenv" does not corrupt the rootfs anymore after this change.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/1758966041
The old U-Boot version used does not build with hostcc >= 10. Backport a
patch fixing that issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/1758966307
The old U-Boot version used does not build with hostcc >= 10. Backport a
patch fixing that issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Raspberry-Pi Zero 2 W is an affordable single board computer. It is
a more powerful drop-in replacement for the Raspberry Pi Zero W.
The board incorporates an Raspberry-Pi RP3A0 system-in-package (SiP) with
a Broadcom BCM2710A1 and 512MB LPDDR2 SDRAM. The CPU is a quad-core 1Ghz
64-bit Arm Cortex-A53. As for other Raspberry-Pis it also provides
2.4GHz 802.11 b/g/n Wifi, Bluetooth 4.2 and BLE.
The BCM2710 cpu is similar to the Raspberry-Pi 3, it uses the same
kernel configuration as the Raspberry-Pi 2 and 3.
Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io>
[Based on https://patchwork.ozlabs.org/project/buildroot/patch/20211030213600.3445223-3-julien.grossholtz@openest.io/
- reformat genimage-raspberrypizero2w.cfg according to the beautify patch-set
- update kernel version to 9878a11 (5.10.78)
- use new bcm2710-rpi-zero-2-w dtb
- update commit log about kernel config (RPi2/3)
- add DEVELOPERS entries for Julien
]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add missing dtb files:
- bcm2708-rpi-cm.dtb from genimage-raspberrypi.cfg
- bcm2708-rpi-zero.dtb from genimage-raspberrypi0.cfg:
- bcm2708-rpi-zero-w.dtb from genimage-raspberrypi0w.cfg
- bcm2710-rpi-cm3.dtb from genimage-raspberrypi3.cfg
- bcm2837-rpi-3-b.dtb from genimage-raspberrypi3-64.cfg
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Enable the runtime testing by adding the tag in the readme.txt
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Dick Olsson <hi@senzilla.io>
Reviewed-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cortex-a53 is not a vaild CPU supported by the SBSA reference machine
[0], so qemu fails to boot in our current defconfig:
qemu-system-aarch64: sbsa-ref: CPU type other than the built-in cortex-a57 not supported
Use ARM cortex-a57 which is the CPU that SBSA was meant to emulate [1]
[0] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=4f335a6381f83beb5d6ac0d3993514379454a99d
[1] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=64580903c2b3aee08d74d64e6248a313b246cb69
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Dick Olsson <hi@senzilla.io>
Reviewed-by: Dick Olsson <hi@senzilla.io>
[yann.morin.1998@free.fr: update the commit log with info from Dick]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a defconfig for the Allwinner Nezha, a raspberrypi-style board built
around the RISC-V 64bit D1 SoC.
There is currently no upstream support, so use the git repos from Samuel
Holland as explained on the linux-sunxi wiki:
https://linux-sunxi.org/Allwinner_Nezha
The U-Boot DTB is also used by opensbi, but the two branches are
unfortunately not in sync at the moment, so add a patch to fix the
compatible for the PLIC so opensbi makes it available to S-Mode (Linux).
The use of the sun20i-d1-spl SPL bootloader / TOC1 file format also makes it
a bit more complicated to build the boot image. As this is expected to only
be a temporary issue, add a U-Boot patch to build the TOC1 image as part of
the build rather than adding explicit support in our U-Boot package to do
it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rebase patch versatile-nommu.patch on top of v5.15.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Increase vfat partition size for qemu-aarch64-sbsa since it now
requires more than 32M. See "Disk full" [1].
[1] https://gitlab.com/kubu93/buildroot/-/jobs/1745752049
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A following patch will switch to the kernel 5.15 for all qemu
defconfigs but the IDE support (used by mips malta) has been
removed from the Linux kernel since 5.14 release [1].
Enable the SCSI support and update the kernel command line.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b7fb14d3ac63117e0e8beabe75f4ea52051fbe3a
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BLK_DEV_IDE_PMAC driver has been removed from the kernel, so use the
libata replacement PATA_MACIO. This requires enabling ATA and BLK_DEV_SD
for the disk to show up, and changing the command line to use /dev/sda.
YENTA depends on PCCARD, so enable it.
The UART does not show up in /dev without DEVTMPFS.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch [1], which is required for DRM to work properly, has been
merged into Linux version 5.14-rc3. There's a 5.14.12 now in stable, so
I took that one.
After Linux boots, /dev/fb0 will be accessible. You can control the
brightness of the display after enabling the framebuffer by running the
following commands:
~ # echo 0 0 > /sys/class/graphics/fb0/pan
~ # echo 255 >/sys/class/backlight/40016c00.dsi.0/brightness
The brightness ranges from 0 to 255, as you can see running the
command:
~ # cat /sys/class/backlight/40016c00.dsi.0/max_brightness
[1] 24b5b1978cd5 ("clk: stm32f4: fix post divisor setup for I2S/SAI PLLs")
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
[Arnout: add explanation to readme.txt]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This bumps to linux 5.14.13, linux-headers 5.14 and u-boot version
2021.10 and drop local uboot patch where CONFIG_SYS_BOOTM_LEN was set to
16MB because on u-boot 2021.10 it's now set to 64MB as default to make
room for Linux images.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux 5.14.13, linux-headers 5.14 and u-boot version
2021.10 and drop local uboot patch where CONFIG_SYS_BOOTM_LEN was set to
16MB because on u-boot 2021.10 it's now set to 64MB as default to make
room for Linux images.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Try to be less smart (focused on the one target/one use-case),
instead reduce the rpi-firmware package to a selectable list
of (verbatim) installed firmware files.
- change rpi-firmware config handling from rpi-variant/rpi-flavour
choices to bootcode.bin, pi-default/-extended/-cut-down and
pi4-/default/-extended/-cut-down selection
- add BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE option to select installable
config.txt file
- remove config.txt modify code/handling from raspberry post-image.sh
script
- add different customized config.txt files to the raspberry board
section
- change dtoverlay krnbt from 'dtoverlay=miniuart-bt,krnbt=on' to extra line
with explanation comment
- change raspberry defconfigs to select appropiate rpi-firmware
and config.txt files
- change genimage-raspberrypi4.cfg/genimage-raspberrypi4-64.cfg to
use start4.elf and fixup4.dat
- update board/raspberrypi/readme.txt (add optional files fixup4.dat,
start4.elf and zImage)
With this changes a better support for custom use-cases should
be possible, specially multi-target SD cards as suggested by
Stefan Agner ([1]).
[1] http://lists.busybox.net/pipermail/buildroot/2021-February/303318.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: fix case of no config.txt provided]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We are going to remove the gcc fork for csky since it doesn't build
with the latest compilers (gcc 8, 10, 11 tested) [1].
Removing theses defconfigs and the csky gcc fork has become unavoidable
since the Buildroot Docker image used by the gitlab CI will switch soon
to Debian bullseye soon [2].
The cksy gcc fork based on gcc 6 has not been updated since it has been
added to Buildroot [3]. Since then, csky has been added to binutils and
gcc but using the latest upstream version (binutils 2.37 and gcc 11) is
not yet possible due to build issue with glibc 2.34 [4].
Moreover, qemu_csky defconfigs was to be used with the csky qemu fork
(based on Qemu 3.x) added by commit [5] and removed by commit [6].
Since then it's not possible to do a runtime test with theses
defconfigs.
Theses defconfigs can be added back later if the csky toolchain support
is fixed and csky supported by upstream Qemu.
[1] http://lists.busybox.net/pipermail/buildroot/2021-August/621504.html
[2] 71b8322712
[3] 7873a5bd5e
[4] http://lists.busybox.net/pipermail/buildroot/2021-October/624596.html
[5] f816e5b276
[6] 58af9a70cc
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Asked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The startup.nsh file is useless to boot EFI payloads. We just need to
follow the naming detection specified in the UEFI spec.
The EFI payload need to be placed in the boot/efi folder in the EFI partition
and follow the architecture naming as described below:
32bit : bootia32.efi
x64 : bootx64.efi
aarch32 : bootarm.efi
aarch64 : bootaa64.efi
This naming is already right in the packages involved (systemd, grub2,
gummiboot), therefore we just need to drop the generation of the
startup.nsh file.
The usage of the startup.nsh in genimage is also dropped to avoid errors in
the image generation.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For the i.MX8 often an Image.gz is built. With these changes, if
BR2_LINUX_KERNEL_IMAGEGZ=y, the correct Image.gz file is now put into
the generated image instead of falling back to the non-existent zImage.
Signed-off-by: Hanspeter Portner <dev@open-music-kontrollers.ch>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds runtime testing of the OCI archive created by the
sloci scripting. It launches a containerd instance, imports, and
runs the OCI container.
The existing QEMU AARCH64 kernel config was extended to enable common
options used by a container runtime (cgroup and overlayfs).
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
[Arnout: adapt file name which is arm64 now; add to DEVELOPERS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update STM32F469-disco configuration files to operate with new kernel.
Result of make tinyconfig was taken as a starting point to fit kernel
into flash memory.
Current setup kernel + rootfs fits in 1.6MB on-chip flash memory
Fixes:
- Move kernel to new flash bank due to growth of dtb size
- Fix kernel start address in bootloader
- Remove outdated path which doesn't affect normal operation mode
For better binary size optimization gcc LTO is turned on.
Signed-off-by: Yauheni Saldatsenka <eugentoo@gmail.com>
[Arnout:
- squash 3 patches into 1;
- remove unused dts file;
- move linux/linux.config to linux-xip.config;
- add a sentence to readme to say SD card is not needed.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Old scripts are still used by a10_olinuxino & a20_olinuxino_micro
Fixes olimex_a20_olinuxino_micro
see https://gitlab.com/buildroot.org/buildroot/-/jobs/1478738568
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The default setting with miniuart-bt requires hciattach which is a
deprecated utility in BlueZ. Setting the krnbt parameter switches to
the modern method of using serdev in the kernel removing the need for
any userspace configuration to enable the Bluetooth controller.
This is documented as applying to all Raspberry Pi variants so just
enable it globally.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently mx6cubox uses a custom boot.scr.txt script
and custom image generation scripts: genimage.cfg, post-build.sh
and post-image.sh.
Switch to using the more standard extlinux.conf solution
and remove the custom scripts in favor of the standard
board/freescale/common/imx/post-image.sh one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
a10_olinuxino is not switched to extlinux.conf, so the broken symlinks
are replaced by the previous content from a20_olinuxino.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
imx7d-sdb has been converted to use disto boot in U-Boot.
Add extlinux.conf support so that the board can boot correctly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, only SPL is supported when BR2_LINUX_KERNEL_INSTALL_TARGET=y
is selected.
Support non-SPL case too.
This is needed for booting imx7d-sabresd, for example.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently wandboard uses a custom boot.scr.txt script
and custom image generation scripts, genimage.cfg and
post-build.sh.
Switch to using the more standard extlinux.conf solution
and remove the custom scripts in favor of the standard
board/freescale/common/imx/post-image.sh one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Running stm32mp1 watchdog is properly recognized and handled by kernel
watchdog framework since Linux v5.6.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Running stm32mp1 watchdog is properly recognized and handled by kernel
watchdog framework since Linux v5.6. For details see the Linux commit
85fdc63fe256 ("drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at
probe"). So U-Boot config fragment can be safely removed without
adding userspace watchdog daemon.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The stm32mp157 images successfully boot only once. Subsequent boot
attempts fail to reach U-Boot. The root cause turns out to be in U-Boot
corruption during the first boot. The stm32mp1 U-Boot stores its
environment at the end of GPT partition named 'ssbl' since v2020.10-rc2.
However Buildroot genimage template for stm32mp157 boards creates 'ssbl'
partition w/o extra space for U-Boot primary and redundant environments.
This patch explicitly specifies 'ssbl' partition size that should be
enough for both u-boot.stm32 image (~1M) and both environments (16K).
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Tested-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In new kernels sunxi-mmc driver has been switched to asynchronous probe.
As a result, mmc (SD/eMMC) indexes can be shuffled breaking board boot.
Switch to GPT partitions to use partition labels instead of explicit
mmcblk device names. Note that the default GPT partition table location
conflicts with the SPL location, so move GPT table after bootloaders.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update the commit id for u-boot to include fixes from the starfive-tech
u-boot repository:
494e5ef7b807 jh7100: Enable full 2M L2 cache
4571f5a4e1e4 vic7100: enable cache ways (L2 cache)
abb06422a5cd Remove fdt_high and initrd_high for Starfive
93099a61c7b0 starfive: beaglev: Disable SIFIVE_CLINT and enable RISCV_TIMER
bfb5abac3d1f Revert "riscv: Enable the SiFive CLINT block driver in S-Mode(VIC7100 ONLY)"
7b70e1d44ba9 defconfig: enable cache_wayenable for better performance
7c585978616b configs: earlycon=sbi is deprecated
The commit abb06422a5cd ("Remove fdt_high and initrd_high for Starfive")
has removed the need for buildroot to patch the fdt_addr_r address.
Update linux from commit in the old 5.10 branch that Fedora image was
using to head of esmil_starlight branch [1] which is currently based
on 5.13-rc5 and represents the best kernel for this board [2]. This
commit was tagged as buildroot-20210609 because the branch gets rebased
regularly.
In addition, the updated kernel now has jh7100-beaglev-starlight.dtb so
buildroot no longer needs to copy the dtb from u-boot.
[1] https://github.com/starfive-tech/linux/tree/esmil_starlight
[2] https://github.com/starfive-tech/linux/issues/26
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[Arnout: add comment to refer to the tag in linux repo]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update the chromebook elm configuration to use v5.10 which is an LTS.
With v5.10, none of the patches previously needed to enable the display
are needed anymore. Deleting them and making minor updates to the linux
kernel configuration.
Signed-off-by: Bilal Wasim <bilal.wasim@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: drop "exit $?" in post-image.sh]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot and Linux kernel versions. Updating U-Boot to 2021.04
requires the following two changes.
First, after switching to binman, u-boot.itb is no more generated for
64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should
be used instead. This image contains SPL, U-Boot, and FIT image,
where FIT image contains other binaries such as BL31 and SCP.
Second, new U-Boot enables support for System Control Processor (SCP)
firmware. SCP firmware is included by default into FIT image in the
combined u-boot-sunxi-with-spl.bin binary. When SCP is not available
or not needed, it should be explicitly disabled by pointing to an
empty file. Support for Allwinner SCP firmware is not yet available
neither in Buildroot nor in mainline kernel. So disable it for now
using custom U-Boot build options.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
