Fixes build failures on other architectures.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As noticed by Arnout, Qt4 and Qt5 cannot be installed together,
because for example the qt.conf installed by one version cannot be
understood by the qmake of another version. We therefore make them
mutually exclusive, which sounds reasonable for the embedded systems
targeted by Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Somehow the old setting wasn't dropped in 184850a42 (bump u-boot /
linux versions to current stable).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
olddefconfig is a new target available in kconfig that allows to take
an old .config file, and update it to the latest version of the code,
without being asked for questions: it automatically assumes the
default value for options whose value was not defined.
It for example allows to take a minimal defconfig, copy it as .config,
and do 'make olddefconfig' to get the full .config.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Our kconfig code is updated to the version of kernel 3.9-rc2. No major
issues during the migration, except:
* Some conflicts when applying 03-change-config-option-prefix.patch
due to upstream kernel changes.
* The need of adding a new patch, 15-fix-qconf-moc-rule.patch, to fix
the make rule that generates the moc file for the Qt-based
interface.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We no longer support ARM less than v3 so kill dead code.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We no longer support ARM less than v4 so drop the generic asm option.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We no longer support ARM less than v4 so just kill dead code that we had
for those cases.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Add Faraday FA526/626 as suggested on bug #1291
Note however that these cores are v4 and NOT v4t.
* Make the sa110 & sa1110 cores -> strongarm since they're the same.
* Drop all of the ARM variants lower than v4 including generic, there's
no point in supporting obsolete targets.
* Fix uClibc USE_BX logic, it was always on, this would break the new
FA526/626 support and broke StrongARM since it's a v4 core.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
git.xilinx.com is no longer available (moved to github), and github
doesn't allow downloading the tarball blobs directly, so use a local
mirror on sources.buildroot.net instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
To match the logic we have for BR2_LINUX_KERNEL_PATCH. The user has
already specified a custom patch directory, so we don't need to be
so specific about the what file names we accept, and it becomes quite
cumbersome when a custom git version is used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the AArch64 Linaro toolchains 2013.02 and 2013.03, remove 2012.11
and 2012.12.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the ARM Linaro toolchains 2013.02 and 2013.03, remove 2012.11 and
2012.12.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 3.7.x series is EOLed upstream so match that marking it as
deprecated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As reported in bug #6164 when using busybox iproute2 openvpn can fail to
locate the 'ip' utility.
This was correct until busybox 1.21.0 was released since it changed the
location of /bin/ip to /sbin/ip (what iproute2 proper does).
So adjust the ip path accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Passing --with-file-converter=enscript isn't enough since the build
system will try the fallback options (a2ps, mpage, texttops) if it's not
found.
This has two bad effects: one of the tools leaking from the distribution
making foomatic-filters think everything will be the same on the target
(and failing when that's not the case), and failed builds when none is
found (enscript is installed in the target directory, the build system
doesn't look there).
So just avoid the test by stating explicitly where enscript will live in
the target. Fixes:
http://autobuild.buildroot.net/results/37ad3d2c5c35f00c644a2c572f1429bafa4b7cf4/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Inherited from libpthsem which uses fork()
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
linknx has support for SMTP via libesmtp, however there's no clean way
to specify where libesmtp-config lives.
So when libesmtp is built it finds it via the headers and is
automatically enabled, but it fails to get the appropiate link line from
libesmtp-config because it's not found.
Fix it by forcibly disabling it. If someone is interested in working
with upstream about this an option like --with-libcurl should be
implemented in configure.
Solves:
http://autobuild.buildroot.net/results/90ebb383d7a2d7bdf09ffac65e2504da7b6d19f5/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes:
http://autobuild.buildroot.net/results/08d6d70f7c89617c20e727e77e0f6be09974dfc1/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: add patch to fix build issue with gcc 4.7+]
[Thomas: various fixes/improvements]
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The need can be patched out by disabling the tests, however the only
package that uses libpthsem (bcusdk) needs a fork-enabled libpthsem so
there's not much point. Fixes:
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
