It is valid that there is no system-wide default time zone defined, in
which case Etc/UTC is assumed.
Fixes: #12316
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Martin Bark <martin@barkynet.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Richard Braun <rbraun@sceen.net>
Cc: Andrew Trapani <andrew.trapani@ontera.bio>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch makes openrc-netifrc package aware of BR2_SYSTEM_DHCP
config, and if set, will start dhcp daemon on configured interface.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
[yann.morin.1998@free.fr:
- simplify condition for BR2_SYSTEM_DHCP
- reword commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We install a template getty service, and we 'instantiate' it in the
default runlevel, using the configured tty.
Ideally, packages that provide a getty program would be responsible
for installing the corresponding service file. However, to keep
consistency with the existing init systems (busybox, systemd, and
sysv), so we do provide it from the openrc package itself.
OpenRC only acts on the files in a runlevel sub-directory, but the
documentation [0] actually suggests that the instance symlink be done
in init.d, and then again symlinked into the actual runlevel
sub-directory. So, we abide by the rules.
Also, to be noted, the getty service file is installed without ensuring
that a getty command is available. This again is not unlike other init
systems, sysvinit and busybox, which behave the same.
[0] https://wiki.gentoo.org/wiki/OpenRC
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
[yann.morin.1998@free.fr:
- move getty template to openrc package (Thomas)
- fix namespace of the vaiables (Thomas)
- simplify creation of the defaults file
- rewrite commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is very basic settings for openrc init.
* system/Config.in
Allows to select openrc as init system (which auto selects
openrc-skeleton and openrc package).
* package/ifupdown-scripts/Config.in
openrc has its own service to bring up/down interfaces, so
ifupdown-scripts should not be enabled when openrc is enabled to
prevent service clash.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
[Thomas: take into account the !BR2_STATIC_LIBS dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the user is brave enough to use a custom rootfs skeleton then we must
not prevent using merged /usr too. Actually it is already possible to do
this, although indirectly, by selecting BR2_INIT_SYSTEMD.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The configuration option BR2_SYSTEM_DEFAULT_PATH allows the user to
override the default path, which can be used by /etc/profile and some
system daemons.
It defaults to the value previously hard-coded in /etc/profile. This
default should be suitable for most users.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As SHA256 is now default, removing weak MD5 option. C libraries now
all support the SHA methods.
glibc 2.7+
uclibc (bdd8362a88 package/uclibc: defconfig: enable sha-256...)
musl 1.1.14+
One issue this would prevent, is a host tool issue with a FIPS enabled
system where weak ciphers/methods are disabled. It seems the crypt(3)
call is impacted by /proc/sys/crypto/fips_enabled (per crypt(3) man
page). It results in mkpasswd returning "(EPERM) crypt failed."
Rather then create a Buildroot host dependency check, this patch
removes the potential corner case from being selected.
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch changes the default mkpasswd method to SHA256 from MD5.
The change both improves the quality of the hash used and prepares
for eventually removing MD5 as a option.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch drops the comment about checking the C libraries version as
they now all support it by default
glibc 2.7+
uclibc (bdd8362a88 package/uclibc: defconfig: enable sha-256...)
musl 1.1.14+
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version v239, systemd-nspawn unconditioanlly uses prlimit(2),
which is not implemented in uClibc-ng. systemd-nspawn can not be
disabled.
This makes systemd glibc-only again.
After a bit of discussion with upstream (om IRC), it looks very
improbable that they accept a patch making systemd-nspawn optional.
They would probably consider a patch that provides that syscall wrapper
if it is missing, though, but that's less trivial...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 879fa7f82a, the
BR2_INIT_SYSTEMD option was changed to allow selecting with a uClibc
toolchain. Unfortunately, the corresponding Config.in comment, which
was already bogus, was not updated to take into account the numerous
dependencies of BR2_INIT_SYSTEMD.
Due to this, even if you have uClibc enabled, the BR2_INIT_SYSTEMD
option may not be visible, and the Config.in comment may also not be
visible, leaving the user in the dark.
This commit fixes the dependencies of the Config.in comment so that
they match the one of the BR2_INIT_SYSTEMD option.
Reported-by: Raphael Jacob <r.jacob2002@gmail.com>
Cc: Raphael Jacob <r.jacob2002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need to disable any systemd parts using either IDN, NSS or gshadow.
IDN is only disabled in C library function call to getnameinfo(),
it does not effect libidn/libidn2 usage in systemd.
Tested with qemu-system-arm.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Only busybox and sysvinit handle the BR2_TARGET_GENERIC_GETTY_TERM and
BR2_TARGET_GENERIC_GETTY_OPTIONS options; the other init systems do
not.
So, protect those options behind appropriate dependencies on busybox
or sysvinit.
Fixes#10301.
Reported-by: Michael Heinemann <posted@heine.so>
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. While skeleton-sysv is relatively
clear, skeleton-common and skeleton-none are less clear on their
relationship to BR2_INIT_*. So rename skeleton-sysv to conform to a
clearer pattern.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. While skeleton-systemd is
relatively clear, skeleton-common and skeleton-none are less clear on
their relationship to BR2_INIT_*. So rename skeleton-systemd to conform
to clearer pattern.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. The name skeleton-none implies no
skeleton at all, not a base skeleton with no init-specific files.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the rootfs is readonly, systemd will expect /var to be writable.
Because we do not really have a R/W filesystem to mount on /var, we make
it a tmpfs [*], and use the systemd-tmpfiles feature to populate it with
"factory" defaults.
We obtain those factory defaults by redirecting /var to that location at
build time, using a symlink /var -> /usr/share/factory which is the
location in which systemd-tmpfiles will look for when instructed to
"recursively copy" a directory.
With a line like:
C /var/something - - - -
it will look for /usr/share/factory/something and copy it (recursively
if it is a directory) to /var/something, but only if it does not already
exist there.
We also mark this copy with the exclamation mark, as it is only safe to
copy on boot, not when changing targets.
To be noted: the real format for such lines are:
C /var/something - - - - /from/where/to/copy/something
But if the source is not given, then it is implicitly taken from
/usr/share/factory (which in our case is as-good a location as whatever
else, so we use it, and thus we need not specify the source of the
copy).
Note that we treat symlinks a little bit specially, by creating symlinks
to the factory defaults rather than copying them.
Finally, /var at build time is a symlink, but at runtime, it must be a
directory (so we can mount the tmpfs over there). We can't change that
as a target-finalize hook, because:
- some packages may want to set ownership and/or access rights on
files or directories in /var, and that only happens while assembling
the filesystem images; changing /var from a symlink to a (then
empty) directory would break this;
- /var would be a directory on sub-sequent builds (until the next
"make clean").
Instead, we use the newly-introduce pre- and post-rootfs command hooks,
to turn /var into a directory before assembling the image, and back to a
symlink after assembling the image.
[*] People who want the factory-defaults only on first boot will have
to tweak the fstab to mount something else than a tmpfs on /var.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we use the same skeleton for sysv-like init systems and
systemd, even though systemd has some peculiarities that makes our
default skeleton unfit.
So, we'll need to provide different skeletons (really, only part of
it) for sysv-like and systemd. In addition, in order to support the
"no init system" (BR2_INIT_NONE) use case, we introduce a "none"
skeleton.
Introduce three new skeleton packages, aptly named skeleton-sysv,
skeleton-systemd and skeleton-none. All three are providers of the
skeleton virtual package, in lieu of the skeleton-common package,
which is now a simple dependency of all three new skeletons.
Those packages are empty for now. In followup changes:
- sysv-specific stuff will be moved out of skeleton-common and into
skeleton-sysv;
- systemd-specific stuff will be added to skeleton-systemd.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout:
- merge with the patch that enables the BR2_INIT_NONE case
- simplify the BR2_PACKAGE_SKELETON_COMMON_ONLY select logic]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- remove the BR2_PACKAGE_SKELETON_COMMON_ONLY logic, and instead
introduce a separate skeleton-none package for the BR2_INIT_NONE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now have two packages that can act as a skeleton, skeleton-common,
also known as our default skeleton, and skeleton-custom.
This means that the skeleton package can be a standard virtual package
now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move all the handling of the default skeleton into a new package,
skeleton-common.
We don't name it skeleton-default, because it will be further split
later, into a skeleton for sysv and another for systemd, with some parts
still common between the two. So just name it skeleton-common right now;
this will save us a rename later.
While we're at it, also assign to SKELETON_COMMON_TARGET_FINALIZE_HOOKS
instead of directly to the global FINALIZE_HOOKS. Therefore, we don't
need to do all of that in a condition BR2_PACKAGE_SKELETON_COMMON==y.
Note: it would be technically sound to move the skeleton files together
within a sub-directory of the skeleton-common package. However, we refer
the user to those files, from various locations (manual, packages). It
will indeed be easier for the user to find those files in
system/skeleton/ rather than in package/skeleton-common/skeleton/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: remove the mkdir $(STAGING_DIR)/usr/include which was removed
in skeleton.mk in master.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the custom skeleton, we practicaly do nothing, except ensure it
contains the basic, required directories, and that those are properly
setup wrt. merged /usr.
Furthermore, our current skeleton is not fit for systemd, and we'll
have to split things out into various skeletons.
So, off-load the custom skeleton into its own package.
Thus, the existing skeleton package is now limited to:
- when using our default skeleton, install and tweak it properly;
- when using a custom skeleton, do nothing except for depending on
the skeleton-custom package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch doing only this]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our current skeleton is tailored to sysv-like init systems; it is not
fit for systemd-based systems. So, in upcoming changes, we'll add
another skeleton for systemd.
This means we can no longer have the current skeleton default to 'y', or
it would be enabled also for systemd, which would be incorrect.
So, we remove the default to 'y' but have it selected by the default
skeleton choice.
However, we do not yet have a way to directly build (really, install)
the custom skeleton, it is built (really, installed) as a dependency of
the default skeleton. So we must also forcibly select the default
skeleton when using a custom one.
Until we have the means to do only one or the other; i.e. when we have a
virtual skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Setting the root pasword is done in a target-finalize hook, so we do not
need to enforce a dependency from the skeleton onto host-mkpasswd.
Dropping that dependency will simplify making skeleton a virtual
package (in up-coming changes).
Instead, it is now selected as any other package. As such, it is
guaranteed to be built before target-finalize.
This however introduces a slight change in behaviour: previously,
host-mkpasswd would only be built if we needed to hash the root password
from its plain-text value. Now, host-mkpasswd is always built as soon as
the root password is non-empty, even if already pre-hashed.
Since host-mkpasswd is a really tiny weeny package bundled in Buildroot,
with only two C files, built as a single unit with a single gcc call,
the overhead is really minimal. Compared to the simplifications this
will allow in the skeleton packages (plural: common, sysv, systemd,
custom) to come, this overhead is acceptable.
Yet another simplification, even if small, to ease providing multiple
skeletons.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, the option BR2_ENABLE_LOCALE was more-or-less controlling
whether NLS support was enabled in packages. More precisely, if
BR2_ENABLE_LOCALE=y, we were not doing anything (so some packages
could have NLS support enabled, some not). And only when
BR2_ENABLE_LOCALE was disabled we were explicitly passing
--disable-nls to packages.
This doesn't make much sense, and there is no reason to tie NLS
support to locale support. You may want locale support, but not
necessarily NLS support. Therefore, this commit introduces
BR2_SYSTEM_ENABLE_NLS, which allows to enable/disable NLS support
globally. When this option is enabled, we pass --enable-nls to
packages, otherwise we pass --disable-nls.
In addition, when this option is enabled and the C library doesn't
provide a full-blown implementation of gettext, we select the gettext
package, which will provide the full blown implementation.
It is worth mentioning that this commit has a visible impact for users:
- Prior to this commit, as soon as BR2_ENABLE_LOCALE=y, packages
*could* provide NLS support. It was up to each package to decide
whether they wanted to provide NLS support or not (we were not
passing --enable-nls nor --disable-nls).
- After this commit, it's BR2_SYSTEM_ENABLE_NLS that controls whether
NLS is enabled or disabled, and this option is disabled by default.
Bottom line: with the default of BR2_SYSTEM_ENABLE_NLS disabled, some
packages may lose NLS support that they used to provide. But we
believe it's a reasonable default behavior for Buildroot, where
generally NLS support is not necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though no timezone implicitly means UTC, systemd is not all that
happy when it does not have a timezone set. This is all fine on a RW
filesystem because systemd will create a symlink on its own (to
Etc/UTC), but not so much on a RO filesystem, causing all kind of
issues at boot time (up to the point that the system is unusable).
We fix that by requiring that the timezone is actually set. The check is
done by verifying that the timezone file is an actual file; if not set,
the test would find a directory and would thus fail.
Update the help entry accordingly.
Also fix indentation in tzdata.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Richard Braun <rbraun@sceen.net>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Martin Bark <martin@barkynet.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_SYSTEM_BIN_SH hidden option defines to what binary the /bin/sh
symlinks should point to. If busybox is chosen, then /bin/sh is created
to point to /bin/busybox.
This works fine with the default installation mode of Busybox, but it
fails with the upcoming "individual binaries" mode, in which each applet
is installed as its own binary, and /bin/busybox doesn't exist: we get
/bin/sh as a broken symlink to /bin/busybox.
Since Busybox already installs its own /bin/sh symlink, properly
pointing to /bin/ash or /bin/hush depending on the selected shell, it
doesn't make sense for the BR2_SYSTEM_BIN_SH logic to override
this. Just let Busybox install its own /bin/sh by making
BR2_SYSTEM_BIN_SH empty when Busybox shell is selected as /bin/sh.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow automatic network configuration via systemd-networkd if selected.
If systemd-networkd is enabled and $BR2_SYSTEM_DHCP is set, then create
a .network file to configure the selected network interface via DHCP.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- merge the two patches from Eric into just one
- instead of generating the dhcp.network file completely from the .mk
file, use a template file, and "sed" it with the right network
interface]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 006a328ad6 ("util-linux: fix build with ncurses") removed
dependency on BR2_USE_WCHAR, but failed to update the reverse
dependencies of util-linux.
This commit updates comments in Config.in for BR2_USE_WCHAR for reverse
dependencies of util-linux which directly uses wchar now or when it is
pulled from other dependencies.
eudev doesn't use wchar directly, but needs C99 compiler. Autotools
generate code with wchar_t for checking C99 compiler.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Don't force remounting / read/write when using a customskeleton and
systemd as init system, to fix the following unmet dependencies:
warning: (BR2_INIT_SYSTEMD) selects BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW
which has unmet direct dependencies (BR2_ROOTFS_SKELETON_DEFAULT)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It uses spawn() and thus fork(), so it needs an MMU.
Fixes a build issue reported on IRC for a cortex-m4 build:
http://pastebin.com/dGCsy0sr
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we limit installing zoneinfo to non-musl toolchain, by lack
of knowledge on how it would work on musl.
Turns out that musl uses the same zoneinfo format as glibc does.
Make it possible to install the TZ info whatever the C library; for
musl, use tzdata as for glibc.
Thanks Rich! ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Marc Khouri <marc@khouri.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The options to purge locales and to generate locale data are currently
located in the toolchain menu. However, these options are not really
related to the toolchain per-se, they are more system-level
configuration options, much like the timezone selection option we
already have in the "System configuration" menu.
Therefore, it makes more sense to have the locale-related options in
the "System configuration" menu as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We expect the custom skeleton to be fully filled with the necessary
files, now. There is definitely no reason we should handle setting the
hostname and the issue file in there. A user using a custom skeleton
should be fully responsible for providing a functional skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We expect the custom skeleton to be fully filled with the necessary
files, now. There is definitely no reason we should handle network
settings in there. A user using a custom skeleton should be fully
responsible for providing a functional skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the following commits, we'll be switching more options to be
conditional on the default or custom skeleton.
So, it makes sense that those options come after the choice of a
skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Being custom means that our default one is not suitable to start with.
So there is no reason to offer it as the default path.
Add a check that it is not empty.
Add a separating empty line, for good measure, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Supporting a R/O rootfs needs a bit more love to be fully operational.
This will come in later patches...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some users have the need to be able to tweak the content of the target
rootfs with root-like rights, that is, from inside the fakeroot script.
Add a new system option to allow those users to provide a list of
scripts, like the post-build and post-image scripts, that will be run
from our fakeroot script.
[Peter: pass TARGET_DIR to scripts, tweak help text]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Cam Hutchison <camh@xdna.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the support of capability to makedevs as extended attribute.
Now, it's possible to add a line "|xattr <capability>" after a
file description to also add a capability to this file. It's
possible to add severals capabilities with severals lines.
[Peter: extend doc, reword Config.in, extend error message,
use HOST_MAKEDEVS_CFLAGS/LDFLAGS for all flags]
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the removal of eglibc support, this commit replaces all
occurences of "(e)glibc" by just "glibc". Most of the occurences are in
package Config.in comments.
In addition, when the form "an (e)glibc ..." was used, it is replaced by
"a glibc ...".
[Peter: add new efi* packages, s/uclibc/uClibc as suggested by Romain,
systemd / liquid-dsp tweaks as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It can be a little bit misleading to have no init system...
Add a comment that states the user has to provide his own init system,
either via a package or a rootfs overlay.
It is expected that such a user will know what to provide, so we don't
really need to specify that it should be /init or /sbin/init or any
arbitrary executable pointed to by the kernel command line "init=..."
or anything else...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With systemd and a custom skeleton, we end up with the following warning:
warning: (BR2_INIT_SYSTEMD) selects BR2_ROOTFS_MERGED_USR which has
unmet direct dependencies (BR2_ROOTFS_SKELETON_DEFAULT)
Which makes sense as the logic to install the symlinks to /usr is part of
the default skeleton handling, but the BR2_ROOTFS_MERGED_USR symbol is ALSO
used by packages to activate various workarounds for a merged /usr, so it
should be always active when using systemd even with a custom rootfs
skeleton (that by definition must use a merged /usr as required by systemd).
So introduce a dummy symbol with the same name for the custom skeleton case,
similar to how we handle the BR2_PACKAGE_BUSYBOX_SHOW_OTHERS option.
This is a hidden option so it can only be activated by enabling systemd (and
not if people just want to use a merged /usr with a custom skeleton but not
systemd), but as this is really a legacy option that is probably good enough
(if not, patches are welcome!).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit b4718c3a28.
The BR2_ROOTFS_MERGED_USR symbol is used to activate various workarounds for
a merged /usr by packages, so it should be active even with a custom rootfs
skeleton.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With systemd and a custom skeleton, you end up with the following
warning:
warning: (BR2_INIT_SYSTEMD) selects BR2_ROOTFS_MERGED_USR which has
unmet direct dependencies (BR2_ROOTFS_SKELETON_DEFAULT)
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd is increasingly expecting things to live in /usr/bin, /usr/sbin
or /usr/lib nad not in /bin, /sbin or /lib. It has inherited those
expectations from a Fedora change:
https://fedoraproject.org/wiki/Features/UsrMove
Note however, that systemd does support /usr being on a separate
filesystem; it just expects an initramfs to mount it before the final
switchroot over to the actual rootfs.
But the traditional use-case for Buildroot is not to boot with an
initramfs; although that is totally feasible, that's probably not what
is commonly done in the vast majority of cases.
However, a lot of packages still install stuff directly into /bin,
/sbin or /lib, which systemd may need early-on in the boot process,
even before it may have a chance to mount /usr. Even though we can
tell systemd, at configure-time, where it should expect programs to
be at runtime, it does not make sense to go head-first against an
upstream wa^Hill.
Add an option so that /bin, /sbin and /lib be symlinks to /usr/bin
and /usr/sbin. That option is forcibly enabled when the init system
is systemd.
Note: we need not handle /lib32 or /lib64, as they already are symlinks
to /lib, which means they will automatically be redirected to /usr/lib,
as /usr/lib32 and /usr/lib64 already are.
Furthermore, this means we're no longer supporting a split-usr setup, so
the corresponding configure options have been removed as well for
systemd and, when using a merged /usr, for eudev as well.
In Buildroot, we decided (with this patch) not to support a split-usr
when systemd is used as an init system. This is a design decision, not
a systemd issue. Thus the select is with BR2_INIT_SYSTEMD rather than
with BR2_PACKAGE_SYSTEMD.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Tested-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "Dynamic using mdev" and "Dynamic using eudev" /dev management
methods are using devtmpfs, just like "Dynamic using devtmpfs only",
on top of which they add either mdev or eudev. But their names might
suggest they use mdev only or eudev only.
Clarify their descriptions by adding "devtmpfs +" to make it
unambiguous.
[Thomas: rewrap the paragraphs in the manual. It makes the diff a lot
less readable, but we actually want the result to be wrapped.]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Making the getty option a menuconfig instead of a simple config
automatically moves its dependees into a menu without the need to
manually declare such a menu.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
