Official ALSA Python binding, including hardware management, mixer and
sequencer control.
http://www.alsa-project.org/
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch add support for the low cost QMTECH XC7Z010 starter kit
board [1].
[1] http://www.chinaqmtech.com/xilinx_zynq_soc
Signed-off-by: Martin Chabot <martin.chabot@gmail.com>
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This project is an implementation of the TCG TPM 2.0 specification. It
is based on the TPM specification Parts 3 and 4 source code donated by
Microsoft, with additional files to complete the implementation.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
exFAT filesystem userspace utilities
We need a patch to fix:
error: unknown type name ‘ssize_t’
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package is separated from the regular libfuse package, as it
contains new API (and can co-exist with libfuse).
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a duplicate of python-pyasn1-modules.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Apcupsd is a UPS control system that permits orderly shutdown of your
computer in the event of a power failure.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A defconfig for the nanopi_neo4 was added in
d1cd9cdf26, but then removed in
8af7b11bd8 because an ARM32 compiler was
needed to build ATF, and this was not supported back then.
Thanks to the addition of package/arm-gnu-a-toolchain/, we can now
re-introduce this defconfig.
Compared to the previous defconfig, the following changes were done:
- enable BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
- bump kernel to 5.4
- increase default rootfs size to 70M
- use mainline u-boot
- switch to Marek Belisko as maintainer
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig supports the OLPC XO-1 platform.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are muliple generations of OLPC laptops, x86 ones based on
Geode, VIA and ARM based with Marvell Armada. All of boot with
OpenFirmware and share some peripherals.
This patch adds the common files.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The support for MacchiatoBin board in U-Boot and Linux has been
significantly improved in the past years. So it no longer makes much
sense to have a separate build configuration based on older vendor
Linux kernel and U-Boot. This commit drops the configuration based on
vendor kernel and U-Boot and renames the mainline-based defconfig.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Thomas: add PSF-2.0 to the licenses and LICENSE.PSF to the license files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Nanopi R1 board with below features:
- U-Boot 2019.01
- Linux 5.0
- Default packages from buildroot
Configuration files taken from Armbian:
https://github.com/armbian/build/blob/master/patch
Signed-off-by: Davide Viti <zinosat@gmail.com>
[Thomas: move U-Boot config and DT to board/friendlyarm/nanopi-r1/uboot/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pkcs11-helper is a library that simplifies the interaction with
PKCS#11 providers for end-user applications. Pkcs11-helper allows
using multiple PKCS#11 providers at the same time, enumerating
available token certificates, or selecting a certificate directly by
serialized id, handling card removal and card insert events, handling
card re-insert to a different slot, supporting session expiration and
much more all using a simple API.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python library for the snappy compression library from Google.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pure Python CBOR (de)serializer with extensive tag support.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A Python implementation of the CANopen standard.
Signed-off-by: Attila Wagner <attila.wagner@onyxinsight.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upcoming release of kodi 19.0 will add libudfread as optional
dependency: https://github.com/xbmc/xbmc/pull/17612
Please note that the removed support of libudf was added on the master
branch so we do not need to backport udf support to kodi 18.x:
558b54a79e
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash files]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Unbound: validating, recursive & caching DNS resolver with
DNSSEC, QNAME minimisation, DNSCrypt and DNS-over-TLS support.
Signed-off-by: Stefan Ott <stefan@ott.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds four new tests for the syslinux bootloader:
- Building on x86, for legacy BIOS
- Building on x86, for EFI BIOS
- Building on x86-64, for legacy BIOS
- Building on x86-64, for EFI BIOS
Runtime testing in Qemu would certainly be possible, but is left as a
future addition to these tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jianhui zhao <zhaojh329@gmail.com>
[Thomas:
- add entry in DEVELOPERS file
- be more explicit with SSL options
- drop logic around luainterpreter since luajit is not properly
detected]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
jbig2dec is a decoder implementation of the JBIG2 image compression format.
Signed-off-by: Raphaël Mélotte <raphael.melotte@essensium.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since spice ver. 0.12.6 doesn't depend on cegui anymore
let's bump to the latest stable version and rename package.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.4
U-Boot 2020.01
Arm Trusted Firmware v2.2
Buildroot default packages.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A number of AArch64 platforms need to build some bits of ARM32 code,
for example in TF-A (ARM Trusted Firmware) or other
firmware/bootloader.
This package allows to get a pre-built cross-compilation toolchain to
build bare-metal ARM32 code.
https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
[Thomas:
- drop empty LICENSE_FILES
- use VERSION variable in SITE variable
- simplify symlink creation
- drop visible Config.in.host option]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 25033cfb86.
This perl package is deprecated and gives following recommendations while
building:
*** THIS IS NOT AN ERROR, JUST A MESSAGE FOR YOUR INFORMATION ***
Do you really need Crypt::SSLeay?
Starting with version 6.02 of LWP, https support was unbundled into
LWP::Protocol::https. This module specifies as one of its prerequisites
IO::Socket::SSL which is automatically used by LWP::UserAgent unless
this preference is overridden separately. IO::Socket::SSL is a more
complete implementation, and, crucially, it allows hostname
verification. Crypt::SSLeay does not support this. At this point,
Crypt::SSLeay is maintained to support existing software that already
depends on it.
However, it is possible that your software does not really depend on
Crypt::SSLeay, only on the ability of LWP::UserAgent class to
communicate with sites over SSL/TLS.
If are using version LWP 6.02 or later, and therefore have installed
LWP::Protocol::https and its dependencies, and do not explicitly use
Net::SSL before loading LWP::UserAgent, or override the default socket
class, you are probably using IO::Socket::SSL and do not really need
Crypt::SSLeay.
Before installing Crypt::SSLeay, you may want to try specifying a
dependency on LWP::Protocol::https.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Always use the --disable-dbengine configuration option, because we do
not support libjudy dependency that is required otherwise.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a single module, which implements
a platform independent file lock in Python, which provides
a simple way of inter-process communication.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A simple interface to SFTP. The module offers high level
abstractions and task based routines to handle your SFTP
needs.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
[Thomas:
- add entry in DEVELOPERS file
- add -DRTTY_SSL_SUPPORT=OFF to explicitly disable SSL support
- fix license file name in the hash file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test case runs a simple pipeline for 100 frames to ensure that
gst1-python works properly.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GStreamer Python binding overrides.
This package also includes a simple upstream patch that fixes building against
python-3.8.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- fix libpython-dir as noticed by Adam
- rewrap a comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package is needed with Freescale i.MX8/i.MX8X defconfigs
version equal to 4.19.35_1.0.0
It is also subject to multi-version support.
The package version aligned with NXP BSP 4.19.35_1.1.0 is 2.3.1
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The board support package includes the following components:
- U-Boot 2020.01
- Linux 5.4.26
- Buildroot default packages
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds EROFS userspace tool erofs-utils to buildroot,
which can be used to generate EROFS images.
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
[yann.morin.1998@free.fr:
- add explicit --enable-lz4
- explain why autoreconf
- add DEVELOPPER entry
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tinyproxy is a small, efficient HTTP/SSL proxy daemon.
https://tinyproxy.github.io
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This file was created by utils/scancpan while adding other packages but
apparently not yet added in the repo.
Assign this test case to Bernd in the DEVELOPERS file since he is
listed as the maintainer for this package.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, adding a host dependency to perl-try-tiny and
target dependency to openssl.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dependency for perl-crypt-ssleay (added in a subsequent commit)
Added via utils/scancpan, without changes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dependency for perl-crypt-ssleay (added in subsequent commit).
Added via utils/scancpan, without changes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a dependency for perl-lwp-protocol-https (added in a subsequent
patch).
Added via utils/scancpan, updating license only.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
