Bump version to 2.6.0.1 and refresh patches.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
(a) When installing themes with unterminated colour formatting
sequences, Irssi may access data beyond the end of the
string. (CWE-126) Found by Hanno Böck.
CVE-2017-15228 was assigned to this issue.
(b) While waiting for the channel synchronisation, Irssi may
incorrectly fail to remove destroyed channels from the query list,
resulting in use after free conditions when updating the state
later on. Found by Joseph Bisch. (CWE-416 caused by CWE-672)
CVE-2017-15227 was assigned to this issue.
(c) Certain incorrectly formatted DCC CTCP messages could cause NULL
pointer dereference. Found by Joseph Bisch. This is a separate,
but similar issue to CVE-2017-9468. (CWE-690)
CVE-2017-15721 was assigned to this issue.
(d) Overlong nicks or targets may result in a NULL pointer dereference
while splitting the message. Found by Joseph Bisch. (CWE-690)
CVE-2017-15723 was assigned to this issue.
(e) In certain cases Irssi may fail to verify that a Safe channel ID
is long enough, causing reads beyond the end of the string. Found
by Joseph Bisch. (CWE-126)
CVE-2017-15722 was assigned to this issue.
For more details, see the advisory:
https://irssi.org/security/irssi_sa_2017_10.txt
While we're at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 20b6624f4b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Passing just the endianness flag to LD is not enough. We need to pass
the right emulation flag which will set everything for us, not only the
endianness.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The tool hciattach_bcm43xx defines the default firmware path in `/etc/firmware`,
but the Broadcom firmware blobs are usually stored in `/lib/firmware`.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2017-13685: The dump_callback function in SQLite 3.20.0 allows
remote attackers to cause a denial of service (EXC_BAD_ACCESS and
application crash) via a crafted file.
CVE-2017-15286: SQLite 3.20.1 has a NULL pointer dereference in
tableColumnList in shell.c
because it fails to consider certain cases where
`sqlite3_step(pStmt)==SQLITE_ROW` is false and a data structure is never
initialized.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/57d/57d9f0ea27e5c8ba73002bd1d0b33027f27a3779/http://autobuild.buildroot.net/results/7c3/7c3133e822c997879fe00923ba0ad7903656c2e1/
bootstrap by default runs ./tools/build/src/engine/build.sh --guess-toolset
to detect what toolchain (compiler variant). On x86 this returns gcc, but
on the ppc64le gcc112 autobuilder this returns xlcpp causing bootstrap.sh to
get confused and bail out:
./bootstrap.sh ..
Building Boost.Build engine with toolset ... tools/build/src/engine/###
\### No toolset specified. Please use --toolset option.
\###
\### Known toolsets are: acc, borland, cc, como, clang, darwin, gcc, gcc-nocygwin, intel-darwin, intel-linux, intel-win32, kcc, kylix, metrowerks, mipspro, msvc, qcc, pathscale, pgi, sun, sunpro, tru64cxx, vacpp, xlcpp, vc7, vc8, vc9, vc10, vc11, vc12, vc14, vc141, vmsdecc
\###/b2
Fix it by explicitly specifying the gcc toolset mode to bootstrap, similar
to how it was already done for the bjam invocations.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I've been using this packages to test changes in the grub package, so
I can maintain them.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add some documentation about running the pc defconfigs in qemu.
In particular, document the use of the -bios parameter to use the OVMF
firmware to test the UEFI image.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This simplifies the pc configs and respective post image scripts to use
the shared genimage script and separate grub config files.
Separate grub files are cleaner to maintain and easier to copy and
modify, for example to support booting the pc defconfigs in qemu.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with version 7, gcc automatically recognises and enforces the
environment variable SOURCE_DATE_EPOCH, and fakes __DATE__ and __TIME__
accordingly, to produce reproducible builds (at least in regards to date
and time).
However, older gcc versions do not offer this feature.
So, we use our toolchain wrapper to force-feed __DATE__ and __TIME__ as
macros, which will take precedence over those that gcc may compute
itself. We compute them according to the specs:
https://reproducible-builds.org/specs/source-date-epoch/https://gcc.gnu.org/onlinedocs/cpp/Standard-Predefined-Macros.html
Since we define macros otherwise internal to gcc, we have to tell it not
to warn about that. The -Wno-builtin-macro-redefined flag was introduced
in gcc-4.4.0. Therefore, we make BR2_REPRODUCIBLE depend on GCC >= 4.4.
gcc-7 will ignore SOURCE_DATE_EPOCH when __DATE__ and __TIME__ are
user-defined. Anyway, this is of no consequence: whether __DATE__ and
__TIME__ or SOURCE_DATE_EPOCH takes precedence, it would yield the
exact same end result since we use the same logic to compute it. Note
that we didn't copy the code for it from gcc so using the same logic
doesn't imply that we're inheriting GPL-3.0.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Arnout: rewrite commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building Python 3.x on MIPS with musl fails because the libffi code
uses a "#ifdef linux" test to decide if we're building on Linux or
not. When building with -std=c99, "linux" is not defined, so instead
of including <asm/sgidefs.h>, libffi's code tries to include
<sgidefs.h>, which doesn't exist on musl.
The right fix is to use __linux__, which is POSIX compliant, and
therefore defined even when -std=c99 is used.
Note that glibc and uClibc were not affected because they do provide a
<sgidefs.h> header in addition to the <asm/sgidefs.h> one.
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[Thomas: reformat patch with Git, add a better commit log and description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That way packages included in that list like ccache will also be
regarded as a normal packages for targets like external-deps,
show-targets or legal-info
Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, HOSTCC and HOSTCXX are set to their _NOCACHE variants in the
'dependencies' target. This is needed because at that time, ccache is
not built yet - host-ccache is one of the dependencies. However, because
this override is only specified for the 'dependencies' target (and
thereby gets inherited by its dependencies), the override is only
applied when the package is reached through the 'dependencies' target.
This is not the case when one of DEPENDENCIES_HOST_PREREQ is built
directly from the command line, e.g. when doing 'make host-ccache'. So
in that case, ccache will be built with ccache... which fails of
course.
To fix this, directly apply the override to the DEPENCIES_HOST_PREREQ
targets.
Note that this only fixes the issue for 'make host-ccache', NOT for
e.g. 'make host-ccache-configure'.
Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
[Arnout: improve commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes XA-245: ARM: Some memory not scrubbed at boot
https://xenbits.xenproject.org/xsa/advisory-245.html
Notice: Not applying XSA-237..244 as they are x86 only and have patch file
name conflicts between 2017.02.x and master.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GCC defines wchar_t even when wchar support is disabled in uClibc. The
LTC_NO_WCHAR macro triggers a local definition of wchar_t that conflicts
with the GCC defined one. Remove LTC_NO_WCHAR to avoid that.
See also https://github.com/libtom/libtomcrypt/issues/313 for more
discussion about this.
Fixes:
http://autobuild.buildroot.net/results/4ff/4ffb593185f7520d2d9a9cc988aa9c510f253930/
Cc: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-9410: fill_buffer_resample function in libmp3lame/util.c heap-based
buffer over-read and ap
CVE-2017-9411: fill_buffer_resample function in libmp3lame/util.c invalid
memory read and application crash
CVE-2017-9412: unpack_read_samples function in frontend/get_audio.c invalid
memory read and application crash
Drop patches now upstream or no longer needed:
0001-configure.patch: Upstream as mentioned in patch description
0002-gtk1-ac-directives.patch: Upstream as mentioned in patch
description/release notes:
Resurrect Owen Taylor's code dated from 97-11-3 to properly deal with GTK1.
This was transplanted back from aclocal.m4 with a patch provided by Andres
Mejia. This change makes it easy to regenerate autotools' files with a simple
invocation of autoconf -vfi.
0003-msse.patch: Not needed as -march <x86-variant-with-msse-support>
nowadays implies -msse.
With these removed, autoreconf is no longer needed.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
that allows optional dependencies
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- use "luainterpreter" instead of "lua" in the dependencies
- replace with a Git formatted patch that doesn't comment code but
removes it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the kernel version to 4.13.8.
Tested with qemu 2.9.1 on bios and UEFI virtual machines.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a dependency of docker-engine v2017.07.0-ce.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Go 1.9 is required for docker-engine and other Go packages in Buildroot.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/ffc/ffc9c10c55c2838ab7002c5ec35244e9bfe46189/
Commit dfa1817d31 (openldap: supports only the real OpenSSL, not LibreSSL)
tried to ensure openldap would only use openssl, but changed the wrong
variable. OPENLDAP_TLS is passed to configure, so it shouldn't be changed:
./configure --target=aarch64-buildroot-linux-gnu .. --with-tls=libopenssl ..
Configuring OpenLDAP 2.4.45-Release ...
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-buildroot-linux-gnu
checking target system type... aarch64-buildroot-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for aarch64-buildroot-linux-gnu-strip... /usr/lfs/v0/rc-buildroot-test/scripts/instance-0/output/host/bin/aarch64-linux-gnu-strip
checking configure arguments... configure: error: bad value libopenssl for --with-tls
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vivante GPU could be a part of SoC along with any CPU architecture
thus get rid of nonsense dependency.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vivante GPU could be a part of SoC along with any CPU architecture
thus get rid of nonsense dependency.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the upstream announcement:
http://www.openwall.com/lists/oss-security/2017/10/19/5
Felix Wilhelm has discovered a flaw in the dns response parsing for
musl libc 1.1.16 that leads to overflow of a stack-based buffer.
Earlier versions are also affected.
When an application makes a request via getaddrinfo for both IPv4 and
IPv6 results (AF_UNSPEC), an attacker who controls or can spoof the
nameservers configured in resolv.conf can reply to both the A and AAAA
queries with A results. Since A records are smaller than AAAA records,
it's possible to fit more addresses than the precomputed bound, and a
buffer overflow occurs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for bananapi M1 board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: Jason <manager@sinovoip.com.cn>
Cc: hailymei@banana-pi.com <hailymei@banana-pi.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The previous version was by mistake mixed up with the patch 'gst-plugins-bad:
openjpeg: Remove compatibility with openjpeg 2.0'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
glibc is now supported for ARC so let's kick-start autobuilders
with glibc toolchain for ARC HS.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes a bug with the BR2_TOOLCHAIN_HAS_THREADS variable
handling which causes CGO_ENABLED to be always 0.
Furthermore, it fixes the cross compilation options for the go
compiler: setting CGO_ENABLED should be done only for the target
compiler not the host one.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Christian Stewart <christian@paral.in>
If selected use:
- system/buildroot harfbuzz in case __sync for 4 bytes is supported
- qt harfbuzz otherwise (using QAtomic instead)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The gpu_mem option is not using the proper option argument which causes sed to
fail.
+ case "${arg}" in
+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
sed: -e expression #1, char 8: extra characters after command
+ case "${arg}" in
+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
sed: -e expression #1, char 8: extra characters after command
The issue comes from the use of $1 instead of $arg to extract the gpu_mem
value. $1 is the $(BINARIES_DIR) which leads to a sed expression error.
Also, it adds the error flag to the shell script to prevent from such situation
and terminate the build in error.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>