gnutls and openssl support can't be enabled at the same time in
sngrep. Prefer openssl if available, otherwise use gnutls.
Fixes:
http://autobuild.buildroot.net/results/7c775b1faf7be90fb4acd3653600f7b6b48aa86f/
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas:
- regroup CONF_OPTS lines
- add an 'else' clause to explicitly disable gnutls and openssl when
none are available
- add a reference to the autobuilder failure]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This kernel marking script is no longer used.
Remove build for host as well, since it's only use was to install mkknlimg.
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We no longer use the marked kernel.
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since release 4.4 a kernel without a trailer is assumed to be device tree
capable. Since our Raspberry Pi defconfigs all use the newer firmware we can
just use the regular kernel image.
https://www.raspberrypi.org/documentation/configuration/device-tree.md
Tested on Raspberry Pi 3.
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2017-3731 - Truncated packet could crash via OOB read.
CVE-2017-3732 - BN_mod_exp may produce incorrect results on x86_64
CVE-2016-7055 - Montgomery multiplication may produce incorrect results
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adam has contributed the python-mutagen and sngrep packages, so add
him as a developer for those two packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
sngrep is a tool for displaying SIP calls message flows from terminal.
It supports live capture to display realtime SIP packets and can also
be used as PCAP viewer.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas:
- ncurses wide char and other sub-options are not needed to build
sngrep, so they are removed, as well as the wchar
dependency. ncurses with wchar support is only needed when
--enable-unicode is passed, but even then, it doesn't work because
the configure script searches <ncursesw/ncurses.h>, so unicode
support has been explicitly disabled.
- add optional dependencies on OpenSSL, GnuTLS and PCRE. This also
makes sure they are explicitly enabled/disabled depending on the
configuration.
- add upstream URL in Config.in file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mutagen is a Python module to handle audio metadata.
It supports ASF, FLAC, MP4, Monkey’s Audio, MP3, Musepack, Ogg Opus,
Ogg FLAC, Ogg Speex, Ogg Theora, Ogg Vorbis, True Audio, WavPack,
OptimFROG, and AIFF audio files. All versions of ID3v2 are supported,
and all standard ID3v2.4 frames are parsed.
It can read Xing headers to accurately calculate the bitrate and
length of MP3s. ID3 and APEv2 tags can be edited regardless of
audio format. It can also manipulate Ogg streams on an individual
packet/page level.
Mutagen works with Python 2.7, 3.3+ (CPython and PyPy) on Linux,
Windows and macOS, and has no dedependencies outside the
Python standard library.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- fix license, it's GPLv2, not LGPLv2+
- rewrap Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The shorter alias, -std=c90, is not known by older versions of GCC.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=20631.
Signed-off-by: Alexey Neyman <stilor@att.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
You can bootup a OpenRISC system, networking is not working.
[Peter: drop unneeded _GETTY_PORT="ttyS0" setting]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for OpenRISC. See here for more details about
OpenRISC http://openrisc.io.
All buildroot included upstream binutils versions are supported.
Gcc support is not upstream, to be able to enable musl C library
support later, we use the branch with musl support.
At the moment it is possible to build a musl based toolchain,
but bootup in Qemu fails.
Gdb is only working to debug bare-metal code, there is no support
for gdbserver/gdb on Linux, yet.
[Peter: drop ?= for GCC_SOURCE]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpcre is needed at runtime not a buildtime. Indicate this in Config.in
and remove MICROPYTHON_LIB_DEPENDENCIES.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While bumping fix async feature related issue:
Both asyncsupport.py and asyncfilters.py use async feature, that is
not available in Python 2 and some features available in Python 3.6.
So in both cases *.py compilation would produce compiler errors.
Hence remove both files after package extraction.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a bug-fix release that addresses the musl libc compatibility
issues encountered with buildroot.
We can also remove the patch which got merged upstream.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As recently discussed on the list:
http://lists.busybox.net/pipermail/buildroot/2017-January/182147.html
eudev no longer has legacy user space firmware loading and the
--with-firmware-path configure flag since the 3.1.3 release:
commit 3b717594600fa717cdf9bcfd0c7c1b703b245482
Author: Kay Sievers <kay@vrfy.org>
Date: Mon Sep 1 09:07:49 2014 -0400
udev: remove userspace firmware loading support
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
So drop it from EUDEV_CONF_OPTS to limit confusion.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 46d6aa520f.
Since commit 7c60211ce3 (tslib: needs kernel headers 3.12)
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12 is always enabled when building tslib. No
need to check for that.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- keep only sha256 hash, not needed to have md5 and sha1 when sha256 is
provided
- add BR2_USE_MMU dependency, since the program uses fork()
- remove UDPXY_MAKE_OPTS, and use the appropriate options during the
build and install steps directly
- use TARGET_MAKE_ENV in the build and install steps]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also removed patch 0003-add-stdarg-include.patch as this has been
committed to upstream.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit also adds a patch that allows libselinux 2.6 to build
properly with older compilers such as gcc 4.4.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: add patch to fix gcc 4.4 build issue.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds optional libselinux support to the util-linux package,
and also tweaks the PAM files instealled by util-linux to work properly
in an SELinux context.
Like was done for linux-pam, the tweak is done by having the SELinux
related lines commented out in the original PAM file, and uncommented
when SELinux support is enabled.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When SELinux support is enabled, the login pam file installed by
linux-pam should be adjusted to use the pam_selinux.so module.
To achieve this in a reasonably simple manner, we introduce the SELinux
related lines in login.pam as comments, and if SELinux support is
enabled, turn those commented lines into real lines.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch written by Waldemar Brodkorb:
http://lists.busybox.net/pipermail/buildroot/2016-November/177726.html
This patch however did not work: "Unfortunately libasplib cmake
infrastructure ignores my CMAKE_CXX_FLAGS."
To make this patch work libasplib needed to be bumped because the cmake
infrastructure was updated back in August 2016 which fixed the problem:
6326d1f5e8
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libasplib now contains modules, we enable only those for the moment
which do not need external dependencies. We are not in a hurry to fully
support all features of this package because the upcoming Kodi release
17.x-Krypton will not carry any ADSP add-ons:
db3b767309
-DASPLIB_MODULES_TO_BUILD=some looks hackish because the default is to
enable all modules:
https://github.com/AchimTuran/asplib/blob/master/CMakeLists.txt#L35
But -DASPLIB_MODULES_TO_BUILD=OFF does not disable the build of all
modules as well because of
https://github.com/AchimTuran/asplib/blob/master/asplib_modules/CMakeLists.txt#L19
so I added "some" as fake value.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using += is always a good idea in conditional assignments, as it
prevents potential future mistakes if unconditional options are added;
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As it happens, specifying the path where to look for libsrtp is not
needed: pjsip does not use the argument to --with-external-srtp as a
search path at all; it only checks whether it is 'no' or something
else.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are a bunch of options that are left unspecified; explicitly
disable them.
The epoll case is special: the configure script is broken, and will
enable it whether we pass --enable-epoll or --disable-epoll. But that's
OK because we prefer epoll over the alternative (select). So we do not
need to fix it. Which is nice becasue the configure.ac is named
aconfigure.ac (yes, with a leading 'a'), so it does not autoreconf
nicely... :-/
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch from upstream until version 1.8 release.
Signed-off-by: Misha Komarovskiy <zombah@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Developper for package/python-babel and package/python-flask-babel.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Flask-Babel is an extension to Flask that adds i18n and l10n support
to any Flask application with the help of babel, pytz and
speaklater. It has builtin support for date formatting with timezone
support as well as a very simple and friendly interface to gettext
translations.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
